Dodge B3500 Differentials

If you’re in search of Dodge B3500 Differentials aftermarket or OEM parts, consider your search over! Advance Auto Parts carries 345 Differentials from top brands with prices ranging from $1.99 to $1,566.99.

Beyond great prices, we stock trusted brands manufacturing all types of Differentials for your Dodge B3500. Of the 17 OEM and aftermarket parts brands we carry, some of the most popular are Driveworks, Yukon Gear, and FELPRO.

And don’t forget to read customer reviews across all Differentials categories in our catalog. Buy with confidence by leveraging past customer experiences of our aftermarket and OEM parts.

At Advance Auto Parts, we don’t think top quality Differentials have to cost top dollar, and we prove it. Browse our top Dodge B3500 Differentials below, order online to ship to your home, or head into your nearest Advance Auto Parts location to get started.

Essential Dodge B3500 Differentials

from

$198.99

Product Features:

Spider gear kit
Fits Dana Spicer 60, 30 spline open differential
Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.

from

$377.99

Yukon 1541H alloy 5 lug rear axle for ’92-’03 Chrysler 9.25″ van with a length of 32-5/8 inches and 31 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. This is a C-clip axle.

Product Features:

31 spline
5 lug
32 5/8″ long
Fits Chrysler 9.25″ in 1992 and up Dodge van

from

$4.99

Product Features:

Side gear thrust washer for Dana Spicer 60, 70, 70U, 70HD and 80
Fits standard open differentials only

from

$36.99

Product Features:

Bulkhead fitting kit
Includes bulkhead fitting, outer fitting and o-ring

from

$276.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

Fits Chrysler 9.25″ rear
Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.

from

$31.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$689.99

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings
Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications

from

$9.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$8.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$8.79

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$509.99

Product Features:

Trac Loc positraction carrier case
Does not include spider gears
Fits Dana Spicer 60
4.10 and down ratio only
ABS and non-ABS compatible

from

$10.79

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$9.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$8.99

Positraction clutch guide.

Product Features:

Clutch guide for Chrysler 9.25″, Dana Spicer 44, Dana Spicer 50, Ford 8.8″, GM 12 bolt passenger car, GM 8.2″, 8.5″ and 8.6″, 1963-1979 Corvette and Nissan Titan
Compatible with Dura Grip positractions only

from

$19.99

Product Features:

Pinion preload shims for Dana Spicer 60 and 70U

from

$73.99

Toyota wheel seal for ’80-’97 Full float Landcruiser outer rear, ’86-’95 dually pick-up.Yukon Mighty seal.

Product Features:

Fits Chrysler 9.25″ rear
Chrome

from

$414.99

Yukon Performance steel spool for Dana 60 with 35 spline axles. fits 4.10 and down. Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications. Spools provide 100% power to both tires at all times and are a lower cost alternative to lockers. Spools are not recommended for street driven vehicles. Yukon Performance spools come with a one year warranty against manufacturing defects.

Product Features:

Fits Chrysler Dana Spicer 60 with 35 spline axles
4.10 and down ratio only
Provides 100% traction to both wheels at all times
Not recommended for street driven vehicles

from

$64.99

Differential side bearing screw adjuster for 9.25″ Chrysler.

Product Features:

Side adjuster for Chrysler 9.25″ rear

from

$224.99

RngPnnInstlKt

from

$156.99

Dana 60 & Dana 70 Power Lok cross pin shaft (TWO needed).

Product Features:

Cross pin shaft
Fits Dana Spicer 60 and 70
Powr Lok positraction only

from

$3.99

Product Features:

Pinion nut washer for Chrysler 7.25″, 8.25″, 8.75″ with 29 spline pinion, Jeep JK rear, Dana Spicer 60, 70, 70U and 70HD and 2007-2010 Ford 10.5″

from

$267.99

USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:

Fits 2000 and down Chrysler 9.25″ rear
Uses Koyo bearings and races
Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.

from

$11.29

Product Features:

O-ring for seal housing
Fits Dana Spicer 60

from

$153.99

M802048 set-up bearing (one bearing). No return.

Product Features:

Set up bearing
Fits M802048 pinion bearing
Easily slips on and off pinion journal to allow for easier pinion depth adjustment

from

$148.99

Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

Product Features:

Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive

Dodge B3500 Differentials List

Differential Oil

Rear Differential Cover Gaskets

Differential Open Unit and Components

Differential Covers

Differential Pinion Shaft Lock Bolts

Differential Bearings

Differential Pinion Flanges

Differential Axle Shafts

Differential Pinion Pilot Bearings

Differential Cover Bolts

Differential Carriers

Differential Bearing Kits

Front Differential Pinion Bearings

Differential Spider Gear Kits

Differential Rebuild Kits

Differential Carrier Shim Kits

Differential Pinion Seals

Differential Cover Plugs

Differential Clutch Packs

Differential Ring and Pinions

Differential End Yokes

Differential Lock Assemblies

Differential Air System Seal Housings

Rear Differential Pinion Bearings

Differential Spools

Differential Carrier Bearings

Differential Carrier Bearing Adjusters

Front Differential Cover Gaskets

Rear Housing Cover Gaskets

Differential Pinion Bearing Kits

Complete Differentials

Differential Drain Plugs

Differential Ring Gear Bolts

Bearing Race Drivers

Differential Carrier Bearing Shims

Differential Crush Sleeves

Differential Side Bearing Spacers

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Gear Install Kits

Differential Cross Pins

Differential Side Gear Thrust Washers

Differential Pinion Bearing Baffles

Differential Pinion Gear Thrust Washers

Differential Drive Pinion Oil Deflectors

Differential Carrier Bolts

Differential Pinion Gear Washers

Limited Slip Differential Assemblies

Differential Spider and Pinion Gear Kits

Differential Clutch Pack Clips

Differentials Brands You Can Trust For Your Dodge B3500

17 trusted brands of Differentials line our shelves, ready to help keep your Dodge B3500 running smooth. Below are some of the most popular brands and their top Differentials offerings:

Popular Yukon Gear Differentials

Yukon Gear products for the Dodge B3500 span several categories. Some of the highest-rated Yukon Gear Differentials that will fit your Dodge B3500 are:

from $46.99

(1)

Cross Pin Shaft For Standard Open Chrysler 9.25"

Differential Cross Pins

Top Dodge B3500 Differentials from Driveworks

Your Dodge B3500 will be purring again thanks to Driveworks brand Differentials available for online order or in-store pick up. Popular Driveworks parts include:

from $10.79

(33)

Taper Bearing Set

Differential Bearings

from $13.99

(14)

Tapered Cone/Cup Wheel Bearing Set

Front Differential Pinion Bearings

from $31.99

(4)

Cylindrical Bearing

Differential Pinion Pilot Bearings

Most Purchased Dodge B3500 Differentials from Yukon Gear

When you buy the most frequently purchased Yukon Gear brand Differentials, you can be confident it will be the right part for your Dodge B3500. Here are the Yukon Gear Differentials Advanced Auto customers buy the most:

from $57.99

This product is not rated

3 Qt – 80W90 Conventional Gear Oil With Posi Additive

Differential Oil

from $10.79

(33)

Taper Bearing Set

Differential Bearings

from $13.99

(14)

Tapered Cone/Cup Wheel Bearing Set

Front Differential Pinion Bearings

FAQs for Dodge B3500 Differentials

What are the most purchased Differentials for the Dodge B3500?

Out of 345 Differentials for the Dodge B3500, the most popular in our inventory are:

from $9.49

(34)

Differential Cover Gasket

Rear Differential Cover Gaskets

from $57.99

This product is not rated

3 Qt – 80W90 Conventional Gear Oil With Posi Additive

Differential Oil

from $5.99

(11)

Differential Shaft Lock Bolt

Differential Pinion Shaft Lock Bolts

What are the top-rated Dodge B3500 Differentials?

Top-rated Differentials for your Dodge B3500 based on customer reviews/ratings are:

from $5.99

(11)

Differential Plug, Rubber

“I used this Rubber plug to fill a pre-drilled hole in a air intake tube that I customized for a particular application in my car, and it works beautif”

from $9.99

(8)

Bearings

“Fit like a glove. Sealed up the diff like mighty putty on steroids”

from $219.99

(6)

Differential Carrier Gear Kit

“Great customer service”

Dodge B3500 Differentials

Your One-Stop Shop For Trusted Dodge B3500 Differentials

Essential Dodge B3500 Differentials

USA Standard Gear – Replacement Spider Gear Set For Dana 60, 30 Spline (Part No.39008)

Yukon Gear – 1541H Alloy 5 Lug Rear Axle For ’92-’03 Chrysler 9.25" Van (Part No.21033)

Yukon Gear – Side Gear Thrust Washer For Dana 60, 70 & 80 (Part No.33532)

Yukon Gear – Zip Locker Bulkhead Fitting Kit (Part No.34000)

Yukon Gear – Pinion Install Kit For Chrysler 9.25" Differential (Part No.13011)

Driveworks – Cylindrical Bearing (Part No.S-R1561TV)

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

Felpro – Differential Cover Gasket (Part No.RDS 55073)

Felpro – DIFFERENTIAL GASKET (Part No.RDS 6095-1)

Victor Reinz – Differential Cover Gasket (Part No.71-14868-00)

Yukon Gear – Replacement Trac Loc Carrier Case, Dana 60, 4.10 & Down (Part No.20043)

Driveworks – Taper Bearing Set (Part No.S-A-18)

National – Bearings (Part No.15245)

Yukon Gear – Positraction Clutch Guide (Part No.33352)

Yukon Gear – Replacement Pinion Preload Shims For Dana 60, Dana 61 & Dana 70-U (Part No.55015)

Yukon Gear – Chrome Cover For Chrysler 9.25" (Part No.32001)

Yukon Gear – Steel Spool For Dana 60 With 35 Spline Axles, 4.10 & Down (Part No.32042)

Yukon Gear – Differential Side Bearing Screw Adjuster For 9.25" Chrysler (Part No.33256)

Richmond Gear – RngPnnInstlKt (Part No.83-1041-M)

Yukon Gear – Dana 60 & Dana 70 Power Lok Cross Pin Shaft (Two Needed) (Part No.33315)

Yukon Gear – Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement (Part No.33164)

USA Standard Gear – Master Overhaul Kit for ’00 & Down Chrysler 9.25" Rear Differential. (Part No.37002)

Yukon Gear – O-Ring For Dana 60 Zip Locker Seal Housing (Part No.34006)

Yukon Gear – Set Up Bearing (Part No.56045)

Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

Dodge B3500 Differentials List

Differentials Brands You Can Trust For Your Dodge B3500

Popular Yukon Gear Differentials

Top Dodge B3500 Differentials from Driveworks

Most Purchased Dodge B3500 Differentials from Yukon Gear

FAQs for Dodge B3500 Differentials

What are the most purchased Differentials for the Dodge B3500?

What are the top-rated Dodge B3500 Differentials?

Find Your Dodge B3500 Differentials by Year

More Popular Parts for All Makes