Name: Edelbrock Carb Power Valve Block-Off Plug #12624 For Demon, Holley, & Quick Fuel Carbs
Brand: Edelbrock
SKU: 12624
Price: 13.99 USD

Edelbrock Carb Power Valve Block-Off Plug #12624 For Demon, Holley, & Quick Fuel Carbs

from

$13.99

Edelbrock Carb Power Valve Block-Off Plug #12624 For Demon, Holley, & Quick Fuel Carbs.

Edelbrock Standard Flow Carburetor Power Valve No. 12685 Single Stage 8.5in Hg

from

$17.99

The Edelbrock No. 12685 Single Stage 8.5 Hg Power Valve operates by using engine vacuum to control the opening and closing rate. During heavy load or under full power situations, they open to supply additional fuel to the main system to eliminate hesitation and bogging, ensuring the smooth delivery of power without any drivability concerns.

Edelbrock Carburetor Accelerator Pump, 12403

from

$43.99

“The Edelbrock No: 12403 Accelerator Pump Cam Kit Assortment Package of 8. These accelerator pump cams will have different shapes and profiles, allowing you to fine tune the accelerator pump’s performance to the engine’s requirements. Cam “”lift”” will directly affects the accelerator pump stroke and pump capacity. While the cam ramp profile and/or shape will control the “”timing”” of the shot. Each kit comes with 8 different accelerator pump cams and will fit Holley 2300, 4150 and 4160 carburetors.”

Edelbrock Standard Main Jet Carburetor Metering Jet Size .073 (Pair), 12470

from

$14.99

“The Edelbrock 94 No. 12470 Carburetor Jets .070″”Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94’s and its later variations. Jets sold in pairs.”

Edelbrock Standard Main Jet Carburetor Metering Jet Size .066 (Pair), 12466

from

$14.99

“The Edelbrock 94 No. 12466 Carburetor Jets .066″”Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94’s and its later variations. Jets sold in pairs.”

from

$19.99

The Edelbrock No: 12371 kit includes the primary fuel bowl gasket, the primary metering block gasket, the secondary metering block gasket and a metering plate gasket. The Edelbrock No: 12371 fits Holley 4160 carburetors.

Edelbrock Carburetor Heat Insulator No. 12410 Base Plate Gasket, Includes Studs

from

$38.99

“The Edelbrock Heat Insulator No. 12410 is a replacement base plate gasket for a 4-barrel, square bore carbs. Gasket is 5/16″” thick and will fit carbs with 1-3/4″” square bores. The Edelbrock No. 12410 kit includes gasket, studs and nuts.”

Edelbrock Performer Series Carburetor Calibration Kit, Helps get the best performance, 1487

from

$66.99

Edelbrock Performer EPS Series 1406 carburetor calibration kit

Edelbrock Fuel Bowl Inverted Flare Fuel Inlet Fitting #12415

from

$22.99

Edelbrock Fuel Bowl Inverted Flare Fuel Inlet Fitting #12415.

Holley Aluminum Street HP Carburetor, 0-82751SA

from

$799.99

The Aluminum Street HP takes all the great features from the race bred HP and the Double Pumper and combines them into the perfect street/strip carburetor.

Holley Professional Race Carburetor: 950 CFM, No Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny, 0-80901RD

from

$1649.99

The Gen 3 utilizes high capacity fuel bowls which feature 20% more fuel capacity to eliminate starvation, integrated fuel shelf to minimize fuel aeration and internal baffling to control fuel slosh. Other features include all aluminum construction, 12 hole billet booster inserts, fully tunable billet metering blocks, adjustable external linkage, throttle position sensor mounting points and knurled (hand adjustable) curb idle screws Each calibration has been dyno and track tested to deliver proven performance!

Edelbrock Carburetor Needle & Seat Hardware Kit, 12600

from

$14.99

The Edelbrock No: 12605 Hardware Kit will fit carburetors with center hung fuel bowls and can be used as replacements or performance upgrades. Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 2300, 4150, 4160, 4165, 4175 and 4500 Series, Quick Fuel 4500, Professional Series and Q-Series, as well as various Demon carburetors.

Edelbrock Non-Adjustable Carburetor Needle and Seat #12605 Size .110 With Viton Tip

from

$22.99

Edelbrock Non-Adjustable Carburetor Needle and Seat #12605 Size .110 With Viton Tip.

Edelbrock Transfer Tube O-Rings No. 12416 For Holley No. 4150, No. 4160, No. 4165, And No. 4175 Carbs

from

$12.99

Edelbrock Transfer Tube O-Rings Pair No. 12416 Will Fit Holley 4150, 4160, 4165 &4175 Series Carb

Edelbrock AVS2 1901 Carburetor: 500 CFM, 4 Barrel, Square Bore, Electric Choke Inlet

from

$519.99

The Edelbrock #1901 AV2 Series 500 cfm Carburetor is designed and calibrated for small cubic-inch single carb applications, match with an Edelbrock Performer or Performer EPS manifold or other brands of similar design. Includes both timed and full vacuum ports for ignition advance. #1901 is calibrated for single-quad applications and factory equipped with: Metering Jets – Primary .095, Secondary .095, Primary Rod .070 x .052, orange spring (5′ Hg). Use carb Studs #8008 or #8024 if needed. Match with an Edelbrock intake manifold for the ultimate induction upgrade.

Edelbrock AVS2 1902 Carburetor: 500 CFM, 4 Barrel, Square Bore, Manual Choke Inlet

from

$458.99

The Edelbrock #1902 AV2 Series 500 cfm Carburetor is designed and calibrated for small cubic-inch single carb applications, match with an Edelbrock Performer or Performer EPS manifold or other brands of similar design. Includes both timed and full vacuum ports for ignition advance. #1902 is calibrated for single-quad applications and factory equipped with: Metering Jets – Primary .095, Secondary .095, Primary Rod .070 x .052, orange spring (5′ Hg). Use carb Studs #8008 or #8024 if needed. Match with an Edelbrock intake manifold for the ultimate induction upgrade.

Edelbrock Carburetor Secondary Throttle Diaphragm, 12404

from

$18.99

The Edelbrock No: 12404 Vacuum Secondary Diaphragm is a replacement service part for popular high performance Quick Fuel, Holley and Demon carburetors.

Edelbrock Carburetor Vacuum Secondary Spring Kit, 12412

from

$26.99

The Edelbrock No: 12412 Vacuum Secondary Spring Kit includes 7 springs that will fit on Holley 4150, 4150HP, 4160 series and various Demon Carburetors.

Edelbrock Carburetor Accelerator Pump Diaphragm 30cc Gasoline, 12400

from

$13.99

The Edelbrock Accelerator Pump Diaphragm 30cc Gasoline No: 12400 for 4150 Carburetors Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage

Edelbrock Carburetor Accelerator Pump, 12401

from

$33.99

Edelbrock No: 12401 50cc Accelerator Pump Diaphragm for 4150 Carburetors. Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage

Dodge Aspen Carburetor Parts

Your One-Stop Shop For Trusted Dodge Aspen Carburetor Parts

Essential Dodge Aspen Carburetor Parts

Edelbrock – Edelbrock Carb Power Valve Block-Off Plug #12624 For Demon, Holley, & Quick Fuel Carbs (Part No.12624)

Edelbrock – Edelbrock Standard Flow Carburetor Power Valve No. 12685 Single Stage 8.5in Hg (Part No.12685)

Edelbrock – Edelbrock Carburetor Accelerator Pump, 12403 (Part No.12403)

Edelbrock – Edelbrock Standard Main Jet Carburetor Metering Jet Size .073 (Pair), 12470 (Part No.12470)

Edelbrock – Edelbrock Standard Main Jet Carburetor Metering Jet Size .066 (Pair), 12466 (Part No.12466)

Edelbrock – Edelbrock Carburetor Gasket Kit, 12371 (Part No.12371)

Edelbrock – Edelbrock Carburetor Heat Insulator No. 12410 Base Plate Gasket, Includes Studs (Part No.12410)

Edelbrock – Edelbrock Performer Series Carburetor Calibration Kit, Helps get the best performance, 1487 (Part No.1487)

Edelbrock – Edelbrock Fuel Bowl Inverted Flare Fuel Inlet Fitting #12415 (Part No.12415)

Holley – Holley Aluminum Street HP Carburetor, 0-82751SA (Part No.0-82751SA)

Holley – Holley Professional Race Carburetor: 950 CFM, No Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny, 0-80901RD (Part No.0-80901RD)

Edelbrock – Edelbrock Carburetor Needle & Seat Hardware Kit, 12600 (Part No.12600)

Edelbrock – Edelbrock Non-Adjustable Carburetor Needle and Seat #12605 Size .110 With Viton Tip (Part No.12605)

Edelbrock – Edelbrock Transfer Tube O-Rings No. 12416 For Holley No. 4150, No. 4160, No. 4165, And No. 4175 Carbs (Part No.12416)

Edelbrock – Edelbrock AVS2 1901 Carburetor: 500 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1901)

Edelbrock – Edelbrock AVS2 1902 Carburetor: 500 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1902)

Edelbrock – Edelbrock Carburetor Secondary Throttle Diaphragm, 12404 (Part No.12404)

Edelbrock – Edelbrock Carburetor Vacuum Secondary Spring Kit, 12412 (Part No.12412)

Edelbrock – Edelbrock Carburetor Accelerator Pump Diaphragm 30cc Gasoline, 12400 (Part No.12400)

Edelbrock – Edelbrock Carburetor Accelerator Pump, 12401 (Part No.12401)

Dodge Aspen Carburetor Parts List

Carburetor Parts Brands You Can Trust For Your Dodge Aspen

Popular United Carb Carburetor Parts

Top Dodge Aspen Carburetor Parts from Edelbrock

Most Purchased Dodge Aspen Carburetor Parts from Edelbrock

FAQs for Dodge Aspen Carburetor Parts

What are the most purchased Carburetor Parts for the Dodge Aspen?

What are the top-rated Dodge Aspen Carburetor Parts?

Find Your Dodge Aspen Carburetor Parts by Year

More Popular Parts for All Makes