DKW 1000 Parts
Top DKW 1000 Parts Categories
DKW 1000 Belts and Hoses
Dayco – Bottom Cog V-Belt; 44.5 Inch Long, Exact Fit Premium Quality (Part No.15445)
from
$29.99
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.
Product Features:
See More
Product Features:
- Provides greater durability and flexibility – 35% stronger than all previous versions
- Prevents electromechanical interference issues on modern vehicles
- Resists heat, oil and grease
Driveworks – Poly Rib Belt Serpentine Belt; 37.01 Long, 6 Rib Count (Part No.44515)
from
$5.49
Dayco engineered to conform to high mileage, worn or misaligned drives without a sacrifice in quiet, long-lasting performance. Constructed with Aramid reinforced EPDM compounds, it delivers more than OE required quality… it delivers the solution to troublesome drive problems. Dayco Poly-Rib Belts meet or exceed SAE J1459 and SAE J2432 specifications.
Product Features:
See More
Product Features:
- Aramid noise resistant fibers embedded in the rubber make this belt run quieter in worn or misaligned pulleys
- No-Noise Advanced Design EPDM rubber compound for quiet extended life
DKW 1000 Fuel and Emissions Systems
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Mr. Gasket – High Performance Electric Fuel Pump – Universal Carbureted Engines (Part No.42S)
from
$56.99
Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!
Product Features:
See More
Product Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No DiaphraGMs Or Mechanical Parts To Wear Out
- Makes An Excellent Fuel Transfer or Booster Pump
- Hose Barbs Fit 5/16″ Fuel Hose
- Self-priming, 2 wire design
- Eliminates vapor lock and flooding
DKW 1000 Wheels and Tires
Schrader – Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 12 Piece (Part No.33500-12)
from
$361.99
Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.
Product Features:
See More
Product Features:
- MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
- COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
- DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
- COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Schrader – Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 4 Piece (Part No.33500-4)
from
$129.99
Schrader TPMS Solutions, a brand of Sensata Technologies, is the leading global manufacturer of tire pressure monitoring systems (TPMS). Schrader is a pioneer in TPMS and its direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms. Schrader offers a complete line of TPMS solutions, that help manage your shop’s needs from start to finish, offers ranging from their single-SKU, programmable EZ-sensor® family of products to pre-programmed OE replacement sensors, and programming and diagnostic tools, retrofit kits, and the industry’s first free online TPMS training www.TPMSAcademy.com For more information about Schrader and its products visit: www.SchraderTPMS.com
Product Features:
See More
Product Features:
- Schrader TPMS sensors and valves are designed and manufactured to meet all OEM quality and functional specifications
- Sensor must be programmed to specifi Y/M/M vehicle
- Compatible with most programming tools
- Make sure that your TPMS programming tool is updated to it’s latest version
- Combines 314.9, 315 & 433 MHz application into one sensor
- Future proofed to support new and pending OE system technologies
- Optimizes inventory levels and returns
- Reduces overal cost and increases speed of service
- Use service kit 20018 to replace the rubber valve assembly
- Valve Core Torque = 3.5 in-lbs (0.4 Nm)
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Schrader – Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece (Part No.33500)
from
$41.99
Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.
Product Features:
See More
Product Features:
- MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
- COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
- DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
- COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Schrader – Programmable Tire Pressure Sensor (TPMS): Adj. Angle Clamp-In Alum Valve, 1 Pc (Part No.33700)
from
$51.99
Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.
Product Features:
See More
Product Features:
- MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
- COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
- DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
- COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
- ADJUSTABLE: 0-40 degree adjustable stem fits into more aftermarket rim sets
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
DKW 1000 Ignition and Tune-Up Products
Carquest – Ignition Coil (Part No.E5)
from
$23.05
BWD® is an aftermarket leader, providing a premium line of engine management products. BWD® manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD® is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.
Product Features:
See More
Product Features:
- Manufactured using high-quality materials to provide superior durability and long service life
- Designed and engineered to ensure precise performance
- A full E-Lam core of silicon steel and solid brass high voltage terminals protects against corrosion. Our ignition coils are built for maximum output voltage
- Primary and Secondary windings feature enamel magnet wire for the highest temperature rating in the aftermarket
- As a tier I manufacturer with engineering and design capabilities second to none, our ignition coils are made to the highest quality standards
Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1521)
from
$16.49
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
- Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Champion – Copper Agricultural Spark Plug: Dependable Performance, OE Replacement, D14 (Part No.514)
from
$4.29
Champion industrial and agricultural spark plugs are backed by global engineering from Federal-Mogul. Precious metals, FISS and Hot Lock designs allow us to provide a plug that Withstands today’s high-temperature/high load service environments.
Product Features:
See More
Product Features:
- Designed for high compression and aggressive environments
- Manufactured for long-lasting durability
- Backed by global engineering from Federal-Mogul
- Superior performance and long lasting durability
Autolite – Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration (Part No.386)
from
$2.49
With over 100 years of engineering expertise and more than 11 billion plugs sold, Autolite continues to set the standard in spark plug technology. Designed and engineered in the USA, these spark plugs feature a copper-glass seal that bonds the insulator, terminal post, and center electrode together, ensuring full required voltage at the spark gap with a 100% leak-proof, gas-tight seal. The multi-rib insulator reduces the risk of flash-over, while the one-piece terminal post adds strength and durability. Additionally, the built-in resistor minimizes radio frequency interference (RFI) and electrode erosion, making these spark plugs a reliable choice for enhancing your vehicle’s performance.
Product Features:
See More
Product Features:
- Copper-glass seal bonds insulator, terminal post center electrode together; assures full required voltage at spark gap; gas-tight seal (100% leak proof)
- Multi-rib insulator reduces danger of “flash-over”
- One-piece terminal post adds strength
- Resistor reduces radio frequency interference (RFI) and electrode erosion
- Quick Starts: The Autolite Copper Spark Plug is engineered to deliver quick and reliable engine starts, ensuring your vehicle is ready to go when you are.
- Good Fuel Economy: Designed to optimize fuel combustion, these spark plugs help improve your vehicle’s fuel efficiency, saving you money at the pump.
- Smooth Acceleration: Experience smoother and more responsive acceleration with the advanced engineering of Autolite Copper Spark Plugs.
ACDelco – Copper Core Spark Plug (Part No.C87)
from
$3.49
ACDelco Gold (Professional) Conventional Spark Plugs are a high quality alternative to Original Equipment (OE) parts. These conventional spark plugs are designed for reliability and efficient performance. Their high-quality copper cores and outstanding suppression characteristics deliver reliable performance. They are also available for Marine applications. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.
Product Features:
See More
Product Features:
- Black Onyx coating helps reduce corrosion
- Copper core provides great heat transfer and helps maximize plug durability
- Available for use in Marine applications
- Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
- Premium aftermarket replacement part
- Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
Search Over 34 DKW 1000 Parts Online for Delivery or Pick Up
Looking for the best DKW 1000 aftermarket replacement parts? Replacing worn and broken parts on your DKW 1000? Check out our online catalog to find the best selection of aftermarket DKW 1000 parts as well as real user reviews on DKW 1000 replacement parts. Make an informed decision about every component you add to your 1000.
At Advance Auto, we’ve got you covered when it comes to getting your DKW 1000 in tip top condition. We’ve got over 34 DKW 1000 parts to choose from in popular categories like Belts and Hoses, Fuel and Emissions Systems and Drivetrains. If you’re looking for the best prices, try searching our DKW 1000 parts catalog to compare OEM and aftermarket parts for your DKW 1000.
Whether you need DKW 1000 body parts, interior components, or custom DKW 1000 parts you can find them online at Advance Auto. Want to order your Wheels and Tires online? Or maybe you need your DKW Ignition and Tune-Up Products same day? No problem, you can pick up 1000 parts in person at locations across the country, or have them delivered to straight to your door after ordering online. Finding a great deal on new and used DKW 1000 parts has never been easier.
Popular Types of Parts for DKW 1000
Advance Auto customers frequently search for the following types of DKW 1000 auto parts. Check out customer reviews and ratings, and compare prices on the following DKW 1000 parts:
Find Parts for Your DKW 1000 by Year
People also search Advance Auto for these popular years of the DKW 1000:
