Chrysler LHS Exhaust Parts
Top Chrysler LHS Exhaust Parts Categories
We carry over 29 Exhaust Parts in inventory for the Chrysler LHS. If you’re looking for aftermarket Exhaust Parts for your Chrysler LHS, check out all these categories:
Essential Chrysler LHS Exhaust Parts
MagnaFlow – HM Grade Universal Catalytic Converter – 2.25" (Part No.99205HM)
from
$178.99
MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99205HM helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design, cutting and welding is required. With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
MagnaFlow – California Universal Catalytic Converter – 2.00" (Part No.418034)
from
$450.99
MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 418034 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design, cutting and welding is required. With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Features:
See More
Product Features:
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
Walker – Ultra EPA Universal Catalytic Converter – 2.25" Inlet (ID) 2.25" Outlet (ID) (Part No.93252)
from
$197.99
Product Features:
See More
- EPA COMPLIANT – For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
- KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES – OE-style high-technology wash coat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
- DURABLE – Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION – Customizable design features expandable bushings for easy fitment and may require specialized fabrication and welding for installation
- OE-STYLE DESIGN – Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
- BUY WITH CONFIDENCE – Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 50,000-mile/80,000-kilometer structural integrity limited warranty. Visit Walkerexhaust.com for details.
MagnaFlow – OEM Grade Universal Catalytic Converter – 2.25" (Part No.51205)
from
$194.99
MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51205 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design, cutting and welding is required. With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
Flowtech – Terminator; Exhaust Tips (Part No.59905FLT)
from
$93.99Product Features:
- Show Quality Chrome Platinum
- Durable Black Finish
- Can Be Welded Or Clamped
- Complete The System
- Glass-Packed Resonators
Walker – Exhaust System Hanger Insulator (Part No.35646)
from
$8.99
Complete your exhaust repair with Walker insulators. Available in a variety of styles and sizes, they’re designed to work with Walker aftermarket replacement parts for quick and easy installation.
Product Features:
See More
Product Features:
- OE DESIGN – Designed with OE-style features for easy installation and fit
- PREMIUM MATERIALS – Made from high-quality materials for durability and long life
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- KEEPS EXHAUST PARTS IN PLACE – Designed to support undercar exhaust components
- BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Felpro – Exhaust Manifold Gasket Set (Part No.MS 95446)
from
$12.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
Walker – Quiet-Flow Direct Fit Exhaust Muffler 2.25" Inlet (ID) 2.5" Outlet (ID) (Part No.21374)
from
$113.99
Designed to fit, perform and sound like the original system, Walker resonators use precise tuning technologies to deliver excellent flow characteristics and OE-style sound.
Product Features:
See More
Product Features:
- RESISTS CORROSION – Durable aluminized steel construction and helps reduce corrosion
- FACTORY SOUND – OE-style louvered tubes (where applicable) help reduce radiated noise for factory-style sound
- FLEXIBLE SOLUTION – Customizable design for easy fitment and may require specialized fabrication and welding for installation
- STRONG AND DURABLE – Features thick OE-style flanges, hardware and brackets for strength
- GET MORE MILES FROM YOUR RESONATOR – Engineered to fit, perform and sound like the original system
Walker – SoundFX Direct Fit Exhaust Muffler 2.25" Inlet (ID) 2.5" Outlet (OD) (Part No.18925)
from
$102.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION – Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST – Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- EASY TO INSTALL – Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and welding
- FACTORY SOUND – Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER – Designed and tested to extend muffler life
Walker – Quiet-Flow SS Direct Fit Exhaust Muffler 2.5" Inlet (ID) 2.5" Outlet (OD) (Part No.21375)
from
$109.99
Product Features:
See More
- CORROSION RESISTANT STAINLESS STEEL – The only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
- EASY TO INSTALL – Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and welding
- BUILT TO LAST – Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- PREMIUM ACOUSTIC CONTROL – OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
- DESIGN VALIDATED – Acoustic and flow tested for quality OE-style sound you can count on
- BUY WITH CONFIDENCE – Comes with Walker’s limited warranty and exclusive 90-Day Safe and Sound Guarantee. Visit Walkerexhaust.com for details.
Walker – Exhaust Clamp (Part No.36364)
from
$66.99
Complete your exhaust repair with a Walker V band clamp. Featuring a T-bolt latch design for superior clamping and sealing, Walker hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- SUPERIOR SEAL – T-bolt latch design for superior clamping and sealing
- OE DESIGN – Designed with OE-style features for secure fit
- THE RIGHT CONNECTION – For use with flared connectors
- PREMIUM MATERIALS – Made from robust material for durability and long life
- BETTER TOGETHER – Use Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Clamp (Part No.35336)
from
$2.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS – Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER – Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Clamp (Part No.35335)
from
$2.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS – Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER – Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Clamp (Part No.35337)
from
$8.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS – Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER – Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Chrysler LHS Exhaust Parts Categories
Helping You Find the Right Exhaust Parts for Your Chrysler LHS
You love your LHS. So we’ve made it easier than ever to help you find Chrysler LHS Exhaust Parts in our online catalog. Our inventory holds 29 aftermarket and OEM Exhaust Parts for your Chrysler LHS, ranging from $2.99 to $704.99.
We offer parts from 4 brands trusted to make quality Exhaust Parts for your Chrysler LHS. Before you buy, take some time to read through customer reviews. We currently have 172 reviews of Chrysler LHS Exhaust Parts from previous customers. Some of the top rated parts include Terminator; Exhaust Tips with 4.0 stars and Direct-Fit HM Grade Catalytic Converter with 3.0 stars.
Find your LHS Exhaust Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Chrysler LHS part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Exhaust Parts Brands for Your Chrysler LHS
Our inventory holds Exhaust Parts for your Chrysler LHS from 4 trusted brands. You’ll find OEM and aftermarket parts from brands like Walker, Magnaflow, and FELPRO, all of which can keep that Chrysler happy.
We have Walker parts available for your Chrysler LHS in categories like Exhaust Fittings and Exhaust Mufflers. Some of the top-rated Walker parts in these categories are:
Top-Rated Walker Exhaust Parts
Leading Walker Exhaust Parts
We carry Walker brand parts for your Chrysler LHS across several catalog categories, including Catalytic Converters. Some of our most reviewed Walker parts include:
from
$197.99
(13)
Ultra EPA Universal Catalytic Converter – 2.25" Inlet (ID) 2.25" Outlet (ID)
Catalytic Converters
FAQs for Chrysler LHS Exhaust Parts
What are the most purchased Exhaust Parts for the Chrysler LHS?
Out of 29 Exhaust Parts for the Chrysler LHS, the most popular in our inventory are:
What are the top-rated Chrysler LHS Exhaust Parts?
Top-rated Exhaust Parts for your Chrysler LHS based on customer reviews/ratings are:
from
$334.99
(1)
Direct-Fit HM Grade Catalytic Converter
“[…] wanted to kill my wallet with a $600 bill to get their part and put it in. When I asked him if I could bring my own part, he raised the labor fr”
