Chevrolet Tracker Exhaust Parts
Top Chevrolet Tracker Exhaust Parts Categories
We carry over 51 Exhaust Parts in inventory for the Chevrolet Tracker. If you’re looking for aftermarket Exhaust Parts for your Chevrolet Tracker, check out all these categories:
Essential Chevrolet Tracker Exhaust Parts
Victor Reinz – Exhaust Manifold Gasket Set (Part No.11-10821-01)
from
$41.99
As you would expect, extremely high temperatures are the sealing challenge for exhaust manifold gaskets. Victor Reinz has a long heritage of supplying manifold gaskets to original equipment vehicle manufacturers. Therefore, Victor Reinz exhaust manifold gaskets meet OE specifications on a wide range of vehicles, covering the most recent high-tech engine designs and going back decades to the muscle car era.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Walker – Exhaust Bolt and Spring (Part No.35129)
from
$11.29
Complete your exhaust repair with a Walker spring bolt kit. Designed to ensure a tight connection and inhibit leaks, Walker hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- KEEPS EXHAUST PARTS IN PLACE : Designed to support undercar exhaust components
- CONSISTENT PERFORMANCE : Spring designed with the right compression strength for a secure connection
- PREMIUM MATERIALS : Made from high-quality materials for durability and long life
- THE RIGHT CONNECTION : Designed to be used for ball and socket joint
- BETTER TOGETHER : Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Pipe Flange Gasket (Part No.31589)
from
$5.89
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- HEAT RESISTANT – Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS – Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE – Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL – Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Flowtech – Terminator; Exhaust Tips (Part No.59905FLT)
from
$93.99Product Features:
- Show Quality Chrome Platinum
- Durable Black Finish
- Can Be Welded Or Clamped
- Complete The System
- Glass-Packed Resonators
BRExhaust – Direct-Fit Exhaust System Kit (Part No.106-0613)
from
$177.99
BRExhaust Direct-Fit Replacement Exhaust Kit 106-0613 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 106-0613’s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0613 includes (1) 2.125in. U-Bolt Clamp, (1) Donut Gasket, (2) Nuts, (2) Bolts and interchanges with OE parts 91175657. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0613 features durable Aluminized Steel construction and is covered by a limited warranty.
Product Features:
See More
Product Features:
- Leaves all emissions equipment intact, maintaining emissions compliance
- Bolt-on, multi-piece design for smooth and easy DIY installation around obstructions, ensuring quality fitment and function without requiring fabrication
- All components, gaskets, clamps, and hardware required, along with installation instructions, are packaged together in a single protective box
- Leaves all emissions equipment intact, maintaining emissions compliance
Walker – EPA Ultra Manifold Converter, Direct Replacement, No Fabrication Needed (Part No.16406)
from
$487.99
Designed to comply with EPA emissions requirements while delivering premium performance with assured compliance, Walker Ultra EPA-Compliant Manifold Converters are available for import and domestic OBDII (1996 and newer) vehicles.
Product Features:
See More
Product Features:
- EPA COMPLIANT : For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
- DIRECT-FIT DESIGN : Bolt-off, bolt-on OE-style converter with integrated manifold assemblies that attach directly to engine cylinder head and match all downstream connections
- KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES : OE-style high-technology wash coat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
- STRONG AND DURABLE : Features thick OE-style flanges and manifolds for strength and durability
- OE-STYLE DESIGN : Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
Dorman – Manifold Converter – Not CARB Compliant – Not For Sale – NY – CA – ME (Part No.674-617)
from
$428.99
This catalytic converter with integrated exhaust manifold – a.k.a. manifold converter – is precision-engineered to match the original equipment on specific vehicle years, makes and models for a reliable replacement.
Product Features:
See More
Product Features:
- Direct replacement – this manifold converter is designed to match the fit and performance of the original equipment on specific vehicles
- Convenient kit – includes gaskets and downpipe hardware to simplify installation
- Durable construction -manufactured within strict tolerances for reliable longevity
- Trustworthy value – backed by team of engineers and quality control experts in the United States
Walker – SoundFX Direct Fit Exhaust Muffler 2" Outlet (OD) (Part No.18888)
from
$151.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION – Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST – Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- EASY TO INSTALL – Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and welding
- FACTORY SOUND – Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER – Designed and tested to extend muffler life
Walker – SoundFX Direct Fit Exhaust Muffler 1.75" Outlet (OD) (Part No.18586)
from
$112.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION – Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST – Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- EASY TO INSTALL – Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and welding
- FACTORY SOUND – Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER – Designed and tested to extend muffler life
MagnaFlow – Universal California Grade CARB Compliant Catalytic Converter (Part No.444105)
from
$327.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 444105. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Durable 308 stainless steel MIG welds
- Compact, lightweight construction enables installation in confined areas, welding is required
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
MagnaFlow – Universal HM Grade Federal / EPA Compliant Catalytic Converter (Part No.99205HM)
from
$179.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99205HM. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Compact, lightweight construction enables installation in confined areas, welding is required
- Compact, lightweight construction enables installation in confined areas, welding is required
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Durable 308 stainless steel MIG welds
Walker – Exhaust Y Pipe (Part No.52384)
from
$179.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION – Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL – Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE – Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Walker – Exhaust Pipe Flange Gasket (Part No.31599)
from
$17.99
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- HEAT RESISTANT – Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS – Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE – Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL – Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Felpro – Exhaust Pipe Flange Gasket (Part No.61015)
from
$11.49
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
BRExhaust – Exhaust Pipe Flange Gasket (Part No.256-287)
from
$7.49
BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.
Product Features:
See More
Product Features:
- Designed to facilitate hassle-free exhaust repair
- Precise fitment
- Manufactured from quality materials to ensure maximum durability
- Designed for a leak free connection
- OE structure and design
- Built to OEM specifications
- Secure gas-tight connection
BRExhaust – Exhaust Bolt (Part No.258-943)
from
$21.99
If the time has come to replace, install, or fix some components of the exhaust system, BRExhaust will have you covered with all necessary accessories, from bolts to hangers, that will help you complete the exhaust job quickly and easily. Getting mounting parts and other accessories and hardware from the manufacturer that designs exhaust systems for the leading North American carmakers will guarantee factory-like quality and perfect fit. Each and every accessory by BRExhaust is made of quality materials to ensure safe and secure exhaust system performance and long service life.
Product Features:
See More
Product Features:
- Designed to facilitate hassle-free exhaust repair
- Precise fitment
- Manufactured from quality materials to ensure maximum durability
- Proper fit and functionality to finish your install
BRExhaust – Exhaust Spring (Part No.251-001)
from
$7.99
BRExhaust replace exhaust springs are built to OE specifications and are designed for precise fitment in order to ensure a leak-free connection. These corrosion-resistant springs could be just the parts you need to complete your exhaust installation.
Product Features:
See More
Product Features:
- Exhaust accessory that enables a complete installation process.
- Precise fitment
- Manufactured from quality materials to ensure maximum durability
- Direct-fit OE replacement exhaust spring
- Engineered to provide excellent exhaust system management
- Corrosion resistant
- Built to OEM specifications
Walker – Exhaust System Hanger Insulator (Part No.35725)
from
$6.99
Complete your exhaust repair with Walker insulators. Available in a variety of styles and sizes, they’re designed to work with Walker aftermarket replacement parts for quick and easy installation.
Product Features:
See More
Product Features:
- OE DESIGN : Designed with OE-style features for easy installation and fit
- PREMIUM MATERIALS : Made from high-quality materials for durability and long life
- AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
- KEEPS EXHAUST PARTS IN PLACE : Designed to support undercar exhaust components
- BETTER TOGETHER : Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Chevrolet Tracker Exhaust Parts Categories
Helping You Find the Right Exhaust Parts for Your Chevrolet Tracker
You love your Tracker. So we’ve made it easier than ever to help you find Chevrolet Tracker Exhaust Parts in our online catalog. Our inventory holds 51 aftermarket and OEM Exhaust Parts for your Chevrolet Tracker, ranging from $3.59 to $1,262.99.
We offer parts from 8 brands trusted to make quality Exhaust Parts for your Chevrolet Tracker. Before you buy, take some time to read through customer reviews. We currently have 867 reviews of Chevrolet Tracker Exhaust Parts from previous customers. Some of the top rated parts include Quiet-Flow SS Direct Fit Exhaust Muffler Assembly 1.9375" Inlet (OD) 2" Outlet (OD) with 4.3 stars and Ultra EPA Universal Catalytic Converter – 2" Inlet (ID) 2" Outlet (ID) with 4.0 stars.
Find your Tracker Exhaust Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Chevrolet Tracker part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Exhaust Parts Brands for Your Chevrolet Tracker
Our inventory holds Exhaust Parts for your Chevrolet Tracker from 8 trusted brands. You’ll find OEM and aftermarket parts from brands like Walker, MagnaFlow, and BRExhaust, all of which can keep that Chevrolet happy.
We have Walker parts available for your Chevrolet Tracker in categories like Exhaust Pipes. Some of the top-rated Walker parts in these categories are:
Top-Rated Walker Exhaust Parts
Leading Walker Exhaust Parts
We carry Walker brand parts for your Chevrolet Tracker across several catalog categories, including Exhaust System Kits and Exhaust Pipes. Some of our most reviewed Walker parts include:
FAQs for Chevrolet Tracker Exhaust Parts
What are the most purchased Exhaust Parts for the Chevrolet Tracker?
Out of 51 Exhaust Parts for the Chevrolet Tracker, the most popular in our inventory are:
What are the top-rated Chevrolet Tracker Exhaust Parts?
Top-rated Exhaust Parts for your Chevrolet Tracker based on customer reviews/ratings are:
from
$217.99
(13)
Quiet-Flow SS Direct Fit Exhaust Muffler Assembly 1.9375" Inlet (OD) 2" Outlet (OD)
“The product fits well and works as expected. Once all the old exhaust was off, it installed quickly. I also replaced the pipe from the converter to ”
from
$172.99
(11)
Ultra EPA Universal Catalytic Converter – 2" Inlet (ID) 2" Outlet (ID)
“Used this on my 98 silverado and I suggest for any one to get mega clamp exhaust it work the best no exhaust leak, no engine light passed emission te”
from
$179.99
(10)
Universal HM Grade Federal / EPA Compliant Catalytic Converter
“erfect fit, car sounds great! Advance was the only store to offer this product with a five year warranty. Others were only offering a 2yr one.”
