Chevrolet Suburban 2500 Engine Control Modules (ECM)

An ACDelco GM Original Equipment Remanufactured Engine Control Module is a GM-recommended replacement for your vehicle’s original component. It regulates various parts of your vehicles engine by taking the inputs from sensors and additional modules and referencing that information back to other sensors, modules, and other areas of the vehicle. Remanufacturing the engine control module is an industry standard practice that involves disassembly of existing units, and replacing components that are most prone to wear and failure with new components. Damaged and obsolete parts are replaced and are 100% end of line tested to ensure they perform to ACDelco specifications. In addition, remanufacturing also benefits the environment by returning components back into service rather than processing as scrap or simply disposing of them. This original equipment engine control module is engineered to fit your specific GM vehicle and will provide the same performance, durability, and service life you expect from General Motors.

Product Features:

• Dictates the operation of your vehicle’s vital systems, which is critical to the performance of your vehicle
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

GM Genuine Parts Engine Control Modules are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These modules regulate various parts of your vehicle’s engine by receiving input from sensors and additional modules and then referencing that information back to other sensors, modules, and areas of the vehicle. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
• Dictates the operation of your vehicle’s vital systems, which is critical to the performance of your vehicle
• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

GM Genuine Parts Refurbished Engine Control Modules are designed, engineered, and tested to rigorous standards, and are backed by General Motors. Refurbishing GM Genuine Parts Engine Control Modules involve returning the failed part to a factory certified repair facility for cleaning, inspection, and diagnosis. Any faulty components are identified and replaced when necessary, and the repaired unit is tested again to ensure it functions to GM specifications. In addition, refurbishing also benefits the environment by returning components back into service rather than processing as scrap or simply disposing of them. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• Refurbishing is an industry standard practice that returns parts into service rather than scrapping them
• Tested to ensure they perform to GM specifications

An ACDelco GM Original Equipment Remanufactured Body Control Module is a GM-recommended replacement for your vehicle’s original component. It communicates with other systems in your vehicle to regulate electronic devices. Remanufacturing the body control module is an industry standard practice that involves disassembly of existing units, and replacing components that are most prone to wear with new components. Damaged and obsolete parts are replaced and are end of line tested to ensure they perform to ACDelco specifications. In addition, remanufacturing returns components back into service rather than processing as scrap or simply disposing of them. This body control module has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• This part requires programming and/or special setup procedures. GM Service Information or equivalent describes the procedures and special tools needed to ensure proper operation in the vehicle
• Dictates the operation of your vehicle’s vital systems, which is critical to the performance of your vehicle

An ACDelco GM Original Equipment Remanufactured Engine Control Module is a GM-recommended replacement for your vehicle’s original component. It regulates various parts of your vehicles engine by taking the inputs from sensors and additional modules and referencing that information back to other sensors, modules, and other areas of the vehicle. Remanufacturing the engine control module is an industry standard practice that involves disassembly of existing units, and replacing components that are most prone to wear and failure with new components. Damaged and obsolete parts are replaced and are 100% end of line tested to ensure they perform to ACDelco specifications. In addition, remanufacturing also benefits the environment by returning components back into service rather than processing as scrap or simply disposing of them. This original equipment engine control module is engineered to fit your specific GM vehicle and will provide the same performance, durability, and service life you expect from General Motors.

Product Features:

• Dictates the operation of your vehicle’s vital systems, which is critical to the performance of your vehicle
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

An ACDelco GM Original Equipment Remanufactured Engine Control Module is a GM-recommended replacement for your vehicle’s original component. It regulates various parts of your vehicles engine by taking the inputs from sensors and additional modules and referencing that information back to other sensors, modules, and other areas of the vehicle. Remanufacturing the engine control module is an industry standard practice that involves disassembly of existing units, and replacing components that are most prone to wear and failure with new components. Damaged and obsolete parts are replaced and are 100% end of line tested to ensure they perform to ACDelco specifications. In addition, remanufacturing also benefits the environment by returning components back into service rather than processing as scrap or simply disposing of them. This original equipment engine control module is engineered to fit your specific GM vehicle and will provide the same performance, durability, and service life you expect from General Motors.

Product Features:

• Dictates the operation of your vehicle’s vital systems, which is critical to the performance of your vehicle
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

GM Genuine Parts Remanufactured Engine Control Modules are designed, engineered, and tested to rigorous standards, and are backed by General Motors. They regulate various parts of your vehicle’s engine by receiving input from sensors and additional modules and referencing that information back to other sensors, modules, and areas of the vehicle. Remanufacturing the engine control module is an industry standard practice that involves disassembly of existing units, and replacing components that are most prone to wear with new components. Damaged and obsolete parts are replaced and completed units are tested to help ensure they perform to GM specifications. In addition, remanufacturing returns components back into service rather than processing as scrap or simply disposing of them. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
• Dictates the operation of your vehicle’s vital systems, which is critical to the performance of your vehicle

GM Genuine Parts Engine Control Modules are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These modules regulate various parts of your vehicle’s engine by receiving input from sensors and additional modules and then referencing that information back to other sensors, modules, and areas of the vehicle. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
• Dictates the operation of your vehicle’s vital systems, which is critical to the performance of your vehicle
• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

This remanufactured body control module (BCM) is thoroughly tested and refurbished as required to restore various accessory functions and prevent damage to related components.

Product Features:

• Thoroughly remanufactured – this body control module has been rebuilt in a dedicated electronics manufacturing facility in North America
• Durable construction – this control module has been thoroughly refurbished for reliable performance
• Cost-effective solution – offers original equipment quality at a better price than a new part
• Quality tested – this module has been individually tested to confirm function and performance

GM Genuine Parts Body Control Modules are designed, engineered, and tested to rigorous standards, and are backed by General Motors. They communicate with other systems in your vehicle to regulate electronic devices. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
• Dictates the operation of your vehicle’s vital systems, which is critical to the performance of your vehicle
• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

This remanufactured body control module (BCM) is thoroughly tested and refurbished as required to restore various accessory functions and prevent damage to related components.

Product Features:

• Thoroughly remanufactured – this body control module has been rebuilt in a dedicated electronics manufacturing facility in North America
• Durable construction – this control module has been thoroughly refurbished for reliable performance
• Cost-effective solution – offers original equipment quality at a better price than a new part
• Quality tested – this module has been individually tested to confirm function and performance

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Protective outer coverings help provide long-lasting durability
• Color-coded wires allow for easy installation
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function