from

$7.69

CUP

from

$349.99

K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

Product Features:

GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
IMPROVED ENGINE SOUND: Hear the power under the hood.
WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
HIGH QUALITY: Made in America.

from

$439.99

The B&M Quicksilver features a ratcheting action for positive shifts, Chrome Knob, neutral safety switch, NHRA/IHRA approved Reverse Lockout. Fits Most 3 and 4 speeds.

Product Features:

Universal Floor Mount Application
Base Trimmed For Custom Fit
Cable Operated
Quick Installation
Accurate Shifting

from

$278.99

The 50 Series Big Block muffler is made for more than just big cubic inch engine applications. Its large case size with internal tuning chamber provides mileage and power gains along with maximum sound control for a quiet interior tone, even under heavy loads. Well suited to heavy duty vehicles such as full size trucks, SUV’s, RVs, and tow vehicles. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$544.99

The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, new turbine hub and dual pattern drive lugs on some GM Holeshots.

Product Features:

Furnace Brazed Impeller
Steel Alloy Pump Drive Tube
Heavy Duty Needle Bearing
Between Stator and Turbine
Furnace Brazed Turbine

from

$123.99

LUND is the first automotive accessory manufacturer to develop and offer comprehensive packages to customize and personalize trucks, SUVs, and vans. An American-based company and the creator of the wrap hood shield category through the invention of the Interceptor hood shield, LUND designs and manufactures the most stylish, high performance, and premium automotive accessories for trucks and SUVs. Product categories include: Interceptor hood protection, nerf bars, running boards, tonneau covers, exterior accessories, storage boxes, cargo management, and bed accessories.

Product Features:

Unique, stylized hood scoops for trucks and cars
Transform stock hood into a simulated performance hood
Can easily be painted to match any factory color

from

$351.99

RngPnn

from

$346.99

BodyMntBshKt

from

$469.99

The GT Platinum Gas is four products in one; a vehicle engine tuner, monitor, gauge and diagnostic device all in a single unit. The GT dramatically improves the utility of your vehicle by increasing horsepower, improving fuel economy and providing a comprehensive set of monitoring features and diagnostic functions. This product is incomparable to other tuning products because it has the largest feature set and the widest range of vehicle applications from a single product part number.

Product Features:

HEADS UP DISPLAY – Monitor over 15 performance parameters at a glance with a dynamic LCD display mounted on a pillar, window, or dash. User set daytime and nighttime driving modes
MULTIPLE PRELOADED TUNES – Access four preloaded tunes with the touch of a few buttons to maximize performance in any situation.
CODE CLEARING – Diagnose and clear trouble codes to ensure proper engine operation.
Reads and Erases Diagnostic Trouble Codes
Display Over 15 Vehicle Parameters
Installation Is Easy-10-20 Minutes
Free Internet Updates And Upgrades
30 Day Money Back Guarantee

from

$126.99

Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:

IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
PREMIUM MATERIALS?–?Made from aluminized steel for durability and long life
BETTER TOGETHER — Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade

from

$53.99

SwyBarBshKt

from

$74.99

K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable and engineered to last for the entire lifespan of your vehicle. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!

Product Features:

ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (5 years based on the average miles driven per year of 15,000 miles)
REUSABLE K&N FILTER SAVES YOU MONEY: A K&N washable, reusable air filter will save you up to $125 vs. purchasing multiple disposable filters (compared to MSRP in USD of corresponding OE filters for 200,000 miles of highway driving)
EASY INSTALLATION: K&N Air Filters are pre-oiled and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
REDUCES WASTE: Over 200 million disposable air filters and their packaging waste wind up in landfills each year- reusable filters help reduce waste in our landfills

from

$199.99

Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing and a black powder coated 2-piece heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with velocity stack, coupler, stainless steel clamps, edge trim, and all necessary hardware for an OE fit and finish. The air filter mounts on the driver side.

Product Features:

DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
IMPROVED ENGINE SOUND: Hear the power under the hood
WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
WILL NOT VOID VEHICLE WARRANTY

from

$109.99

Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:

IMPROVED FLOW CAPACITY – Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
DESIGNED TO PERFORM – Fixture checked to ensure a precise fit for quick and easy installation
AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
PREMIUM MATERIALS – Made from aluminized steel for durability and long life
BETTER TOGETHER – Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade

from

$456.99

The X4 Performance Programmer connects high-performance tunes to your vehicle for an immediate boost in horsepower and torque. Awaken your engine to its maximum real potential with preloaded, dyno-proven tune files through the easy-to-use functionality. Instantly increase horsepower and torque and customizeModify a variety of parameters at the touch of a button, all while monitoring gauges on a customizable display.

Product Features:

Read vehicle performance data on a full-color LCD display for easy viewing, day or night.
Preloaded, street-tested, dyno-proven tunes boost horsepower, torque, and throttle sensitivity.
Reads and clears DTC (Diagnostic Trouble Codes) with ease.
Load up to 10 custom tune files created by any SCT Custom Tuning Dealer.
Full color LCD display
High-speed data logging/monitoring
Dual analog inputs
Most popular vehicles supported
Installs quickly and easily
Easy restoration back to stock
User adjustable vehicle parameters
USB Interface cable included
Product might not be available in all states due to local laws.

from

$175.99

CntrlArmBshngKt

from

$175.99

CntrlArmBshngKt

from

$467.99

Give your Chevrolet Avalanche, Suburban or Yukon XL 1500’s exhaust system an upgrade with a DynoMax Ultra Flo welded 3-in. single cat-back exhaust system. Features a DynoMax Ultra Flo welded muffler that features Continuous Roving Fiberglass (CRF) to absorb unwanted interior resonance while maintaining a deep performance tone.

Product Features:

COMPATIBILITY — Designed for 2002-2006 Chevrolet Avalanche 1500 and 2001-206 Chevrolet Suburban and Yukon 1500; see product information for compatibility and engine specs
COMPLETE SOLUTION — Includes DynoMax Ultra Flo welded muffler, pipes, tip and clamps
EASY TO INSTALL — Direct-fit bolt-on pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn¿t require specialized fabrication and/or welding
EASY TO INSTALL — Direct-fit bolt-on pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn┐t require specialized fabrication and/or welding
IMPROVED FLOW CAPACITY — 3-in. Aluminized-steel tubing with mandrel bends improves flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
SUPERIOR PERFORMANCE — Straight-through design ensures unrestricted exhaust flow and reduces back pressure; dyno proven to flow up to 1,800 SCFM
PREMIUM ACOUSTIC CONTROL — Exclusive Continuous Roving Fiberglass (CRF) technology absorbs unwanted interior resonance while maintaining a deep performance tone
ENGINEERED TO LAST — Muffler features stainless-steel construction with a micro-finish for lifelong protection¿and 100% welded design for maximum durability
ENGINEERED TO LAST — Muffler features stainless-steel construction with a micro-finish for lifelong protection┐and 100% welded design for maximum durability
NOTES — 4-in. Outlet buffed and polished stainless-steel slant cut tip; 3-in. straight cut tail pipes

from

$73.99

The B&M Shift Improver Kit the easiest way to get the performance you’ve always wanted out of your automatic transmission, two modes to select from: Heavy Duty, or Street/Strip. It’s our least expensive and simplest to install kit.

Product Features:

Provides Crisp Shifts
On Any Stock Automatic Transmission
Eliminates Soft/Sluggish Shift
Eliminates Shift Overlap
Eliminate Clutch and Band Wear
Improves Transmission Life
Transmission Removal Not Required

from

$117.99

ShkAbsrbrAssyKt

from

$179.99

Flexplate GM Ls

from

$201.99

Rancho® RS5000 struts are available most popular applications at an incredible value. RS5000 struts feature twin-tube construction with 10-stage velocity sensitive valving – for stability and control engineered to each vehicle model.

Product Features:

Ten-stage velocity sensitive valving
Nitrogen gas charged
High-grade all weather hydraulic fluid – Contains special modifiers to reduce friction and ensure smooth rod reaction
Improved handling and control
Ideal for on and off-road use