Chevrolet Suburban 1500 Exhaust Parts

Essential Chevrolet Suburban 1500 Exhaust Parts

Walker – SoundFX Muffler, Direct Replacement, No Fabrication Needed (Part No.18957)

SoundFX Muffler, Direct Replacement, No Fabrication Needed

from

$73.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.

Product Features:
  • RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
  • BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
  • EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and/or welding
  • FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
  • GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
See More

Dorman – Exhaust Bolt (Part No.H80151097742DOR)

Exhaust Bolt

from

$35.60
Exhaust Bolt

Walker – Exhaust Resonator and Pipe Assembly (Part No.55565)

Exhaust Resonator and Pipe Assembly

from

$152.99
Designed to fit, perform and sound like the original system, Walker resonators use precise tuning technologies to deliver excellent flow characteristics and OE-style sound.

Product Features:
  • EASY TO INSTALL — Meticulous pipe routing and OE-style hardware, flanges, and brackets for fast, easy installation
  • RESISTS CORROSION — Durable aluminized steel construction and helps reduce corrosion
  • FACTORY SOUND — OE-style louvered tubes (where applicable) help reduce radiated noise for factory-style sound quality
  • STRONG AND DURABLE — Features thick OE-style flanges, hardware and brackets for strength
  • GET MORE MILES FROM YOUR RESONATOR ASSEMBLY — Engineered to fit, perform and sound like the original system
See More

Walker – Exhaust Pipe Flange Gasket (Part No.31554)

Exhaust Pipe Flange Gasket

from

$17.99
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they¿re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • HEAT RESISTANT — Designed to resist heat for long-lasting performance
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

Walker – Exhaust Tail Pipe 2.625" Inlet (OD) (Part No.54382)

Exhaust Tail Pipe 2.625" Inlet (OD)

from

$79.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
  • EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
  • OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
See More

Felpro – EXHAUST MANIFOLD BOLT SET (Part No.ES 75120)

EXHAUST MANIFOLD BOLT SET

from

$24.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Designed and manufactured to meet the needs of the exhaust system repair environment.
  • Verified, tested and certified proprietary Organic coating resists corrosion.
  • Tightly controlled coefficient of friction ensures reliable installation.
  • Application specific kit contents
  • Self-locking nuts (where applicable).
See More

Felpro – Exh. Manifold Gasket (Part No.A8112975227FEL)

Exh. Manifold Gasket

from

$19.16
Exh. Manifold Gasket

Walker – Exhaust Tail Pipe 2.75" Inlet (ID) (Part No.55540)

Exhaust Tail Pipe 2.75" Inlet (ID)

from

$143.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
  • EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
  • OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
See More

Dorman – Exhaust Manifold Hardware Kit (Part No.675-226)

Exhaust Manifold Hardware Kit

from

$22.49
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

Product Features:
  • Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
  • Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Walker – Exhaust System Hanger Insulator (Part No.35229)

Exhaust System Hanger Insulator

from

$7.79
Complete your exhaust repair with Walker insulators. Available in a variety of styles and sizes, they¿re designed to work with Walker aftermarket replacement parts for quick and easy installation.

Product Features:
  • OE DESIGN — Designed with OE-style features for easy installation and fit
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

Dorman – Direct Fit Exhaust Manifold: With Heat Shield (Part No.674-732)

Direct Fit Exhaust Manifold: With Heat Shield

from

$162.99
Certain original equipment exhaust manifolds warp and crack due to lower-grade iron construction. This Dorman OE FIX replacement is made of high-grade ductile iron that better handles heat and stress for greater durability.

Product Features:
  • Upgraded materials – this replacement exhaust manifold is constructed of ductile iron to prevent future warping and cracking.
  • Complete kit – includes new manifold, manifold gasket, 2 flange gaskets, 3 studs, 3 nuts.
  • Direct fit – reverse engineered from original equipment for seamless installation
  • Quality engineering – designed and tested in the United States
See More

Flowtech – Shorty Smog Headers (Part No.91836-1FLT)

Shorty Smog Headers

from

$670.99
Shorty Smog Headers

Walker – Exhaust Clamp (Part No.36522)

Exhaust Clamp

from

$26.99
Complete your exhaust repair with a Walker MEGA preformed band clamp. Designed to ensure a tight connection and inhibit leaks, Walker hardware is manufactured from durable and robust material for long service life.

Product Features:
  • SUPERIOR SEAL — Provides superior 360░ clamping and sealing on muffler inlets, outlets, elbow joints and pipe
  • SUPERIOR SEAL — Provides superior 360° clamping and sealing on muffler inlets, outlets, elbow joints and pipe
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for your vehicle repair needs
  • PREMIUM MATERIALS?–?Made from a variety of materials including low-carbon steel or stainless steel for durability and long life
  • BETTER TOGETHER — Use Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

Walker – Exhaust Clamp (Part No.35794)

Exhaust Clamp

from

$10.29
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.

Product Features:
  • CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS?–?Made from quality material for durability and long life
  • BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
See More

Dorman – Help – Exhaust Stud Kit – M10-1.5 x 62mm (Part No.03133)

Exhaust Stud Kit - M10-1.5 x 62mm

from

$17.29
Our exhaust manifold flange kit includes all necessary studs and nuts for a complete repair.

Product Features:
  • Direct replacement – this exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles.
  • Ideal solution – this stud and nut are reliable replacements for original parts that are missing or have failed due to wear
  • Durable construction – these parts are made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Help – Exhaust Flange Stud Kit – M10-1.5 x 62mm Stainless Steel (Part No.03133HP)

Exhaust Flange Stud Kit - M10-1.5 x 62mm Stainless Steel

from

$26.99
This exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles. Made of quality materials, this hardware is engineered for reliable performance.

Product Features:
  • Upgraded hardware – this set of six M10-1.5 exhaust manifold mounting studs and nuts are 100 percent stainless steel for superior heat and corrosion resistance.
  • Convenient solution – kit contains all the application-specific hardware necessary to join one exhaust manifold to one manifold flange
  • Matches fit – this hardware matches the fit and function of the factory fasteners, while offering superior durability
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

MagnaFlow – Street Series Cat-Back Performance Exhaust System (Part No.15666)

Street Series Cat-Back Performance Exhaust System

from

$788.99
The MagnaFlow Street Series Cat-Back Performance Exhaust System 15666 brings out the personality of your SUV with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 4in. Polished Welded-On Single Wall Angle Cut Rolled Edge tips, this SUV exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other SUV’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15666 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15666 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:
  • Dyno-proven performance
  • Durable corrosion-resistant stainless steel construction
  • CNC precision robotic manufacturing techniques
See More

Dynomax – Single – 3in Cat-Back Exhaust System – Ultra Flo Welded Muffler: Stainless Steel (Part No.39442)

Single - 3in Cat-Back Exhaust System - Ultra Flo Welded Muffler: Stainless Steel

from

$679.99
Give your Chevrolet Avalanche/Chevrolet Suburban 1500/GMC Yukon 1500’s exhaust system an upgrade with a DynoMax Ultra Flo welded 3-in. single cat-back exhaust system. Features a DynoMax Ultra Flo welded muffler that features Continuous Roving Fiberglass (CRF) to absorb unwanted interior resonance while maintaining a deep performance tone.

Product Features:
  • COMPATIBILITY — Designed for 2007-2008 Chevrolet Avalanche, Chevrolet Suburban and GMC Yukon; see product information for compatibility and engine specs
  • COMPLETE SOLUTION — Includes DynoMax Ultra Flo welded muffler, pipes, tip and clamps
  • EASY TO INSTALL — Direct-fit bolt-on pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn¿t require specialized fabrication and/or welding
  • EASY TO INSTALL — Direct-fit bolt-on pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn┐t require specialized fabrication and/or welding
  • IMPROVED FLOW CAPACITY — 3-in. Stainless-steel tubing with mandrel bends improves flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
  • SUPERIOR PERFORMANCE — Straight-through design ensures unrestricted exhaust flow and reduces back pressure; dyno proven to flow up to 1,000 SCFM
  • PREMIUM ACOUSTIC CONTROL — Exclusive Continuous Roving Fiberglass (CRF) technology absorbs unwanted interior resonance while maintaining a deep performance tone
  • ENGINEERED TO LAST — Muffler features stainless-steel construction with a micro-finish for lifelong protection¿and 100% welded design for maximum durability
  • ENGINEERED TO LAST — Muffler features stainless-steel construction with a micro-finish for lifelong protection┐and 100% welded design for maximum durability
  • NOTES — 4-in. Outlet double wall, buffed and polished stainless-steel slant cut tip
See More

Dynomax – Exhaust Intermediate Pipe (Part No.54846)

Exhaust Intermediate Pipe

from

$185.99
Dynomax Performance Exhaust, a leading performance exhaust brand built on over 20 years of market leadership. Each and every Dynomax product is backed by engineers who know what you want and expect out of a performance exhaust product.

Product Features:
  • Mandrel bends improve flow capacity over traditional bends
  • Combine state-of-the-art engineering with quality material to provide exceptional strength and durability
  • Dynomax premium pre-bent pipe is manufactured with precision benders, and then fixture checked, insuring every part is a perfect fit, providing quick and easy installation.
  • Pipe diameters are increased from OEM sizes to improve flow and increase power
See More

MagnaFlow – California Grade CARB Compliant Universal Catalytic Converter (Part No.5551206)

California Grade CARB Compliant Universal Catalytic Converter

from

$1301.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 5551206. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
  • Compact, lightweight construction enables installation in confined areas, welding is required.
  • Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – OEM Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.51206)

OEM Grade Federal / EPA Compliant Universal Catalytic Converter

from

$194.99
MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51206 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
  • Compact, lightweight construction enables installation in confined areas, welding is required.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – HM Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.99206HM)

HM Grade Federal / EPA Compliant Universal Catalytic Converter

from

$178.99
MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99206HM helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
  • Compact, lightweight construction enables installation in confined areas, welding is required.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

BRExhaust – Exhaust Flange Gasket (Part No.256-1093)

Exhaust Flange Gasket

from

$12.29
BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.

Product Features:
  • Designed to facilitate hassle-free exhaust repair
  • Precise fitment
  • Manufactured from quality materials to ensure maximum durability
  • Designed for a leak free connection
  • OE structure and design
  • Built to OEM specifications
  • Secure gas-tight connection
See More

Felpro – Exhaust Pipe Flange Gasket (Part No.61074)

Exhaust Pipe Flange Gasket

from

$6.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Felpro – Exhaust Pipe Flange Gasket (Part No.61287)

Exhaust Pipe Flange Gasket

from

$8.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Helping You Find the Right Exhaust Parts for Your Chevrolet Suburban 1500

You love your Suburban 1500. So we’ve made it easier than ever to help you find Chevrolet Suburban 1500 Exhaust Parts in our online catalog. Our inventory holds 112 aftermarket and OEM Exhaust Parts for your Chevrolet Suburban 1500, ranging from $2.99 to $3,236.99.

We offer parts from 17 brands trusted to make quality Exhaust Parts for your Chevrolet Suburban 1500. Before you buy, take some time to read through customer reviews. We currently have 24,858 reviews of Chevrolet Suburban 1500 Exhaust Parts from previous customers. Some of the top rated parts include Exhaust Manifold Hardware Kit with 4.3 stars and Exhaust Stud Kit – M10-1.5 x 62mm with 4.7 stars.

Find your Suburban 1500 Exhaust Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Chevrolet Suburban 1500 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Exhaust Parts Brands for Your Chevrolet Suburban 1500

Our inventory holds Exhaust Parts for your Chevrolet Suburban 1500 from 17 trusted brands. You’ll find OEM and aftermarket parts from brands like Walker, Dorman, and FELPRO, all of which can keep that Chevrolet happy.
We have MAHLE Original parts available for your Chevrolet Suburban 1500 in categories like Exhaust Gaskets. Some of the top-rated MAHLE Original parts in these categories are:
Exhaust Manifold Gasket Set
from $35.99
(11)
Exhaust Manifold Gasket Set
Exhaust Manifold Gaskets

Top-Rated Walker Exhaust Parts

Leading Walker Exhaust Parts

We carry Walker brand parts for your Chevrolet Suburban 1500 across several catalog categories, including Exhaust Hangers and Exhaust Fittings. Some of our most reviewed Walker parts include:
Exhaust System Hanger Insulator
from $7.79
(31)
Exhaust System Hanger Insulator
Exhaust System Insulators
Exhaust Clamp
from $10.29
(14)
Exhaust Clamp
Exhaust Clamps

FAQs for Chevrolet Suburban 1500 Exhaust Parts

What are the most purchased Exhaust Parts for the Chevrolet Suburban 1500?

Out of 112 Exhaust Parts for the Chevrolet Suburban 1500, the most popular in our inventory are:
Exhaust Manifold Gasket Set
from $31.99
(37)
Exhaust Manifold Gasket Set
Exhaust Manifold Gaskets
Exhaust Manifold Hardware Kit
from $17.99
(17)
Exhaust Manifold Hardware Kit
Exhaust Manifold and Header Hardware

What are the top-rated Chevrolet Suburban 1500 Exhaust Parts?

Top-rated Exhaust Parts for your Chevrolet Suburban 1500 based on customer reviews/ratings are:
Exhaust Manifold Hardware Kit
from $15.99
(20)
Exhaust Manifold Hardware Kit
“Life saver for sure . Cheap and definitely better quality than factory in my opinion . I had 2 originals break off when attempting a manifold gasket r”
Exhaust Stud Kit - M10-1.5 x 62mm
from $17.29
(19)
Exhaust Stud Kit – M10-1.5 x 62mm
“hooked my exhaust right back on”
HM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter
from $595.99
(17)
HM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter
“Worked very well as advertized, easy installtion and performance is great.”