Chevrolet Silverado 2500 Tail, Stop and Turn Lights

As the Leading Value-Added Global Distributor of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles While Offering Our Customers the Most Comprehensive and Cost Effective Part Solutions, KAI is Supplying a New Standard Replacement Passenger Side Parking/Signal/Driving Light, Avalanche Is Without Cladding. It is Designed to Replace Your Existing Signal/Park/Drive Lamp. Check to Be Sure It Fits Your Vehicle.

Product Features:

• Avalanche Is Without Cladding, Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Economy Replacement Passenger Side Parking/Signal/Driving Light, Avalanche Is Without Cladding. It is Designed to Replace Your Existing Signal/Park/Drive Lamp. Check to Be Sure It Fits Your Vehicle.

Product Features:

• Avalanche Is Without Cladding, Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

• Premium quality materials for longer service life
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Make better electrical repairs and accessory installations with this pigtail connector. Designed for a clean appearance when installed, it features weatherproof terminals and a locking tab for a reliable quick disconnect electrical connection.

Product Features:

• Professional appearance – this electrical pigtail is designed for a clean, professional look when installed.
• Convenient solution – this pigtail connector allows the circuit to be quickly disconnected for service or occasional use
• Durable construction – this pigtail connector features weatherproof seals and a locking tab for a reliable connection
• Versatile component – this connector can be used in a variety of repairs and custom installations

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Protective outer coverings help provide long-lasting durability
• Color-coded wires allow for easy installation
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

Long life miniature bulbs perform twice as long as any standard miniature bulb. Designed for durability, lower maintenance and greater safety.

Product Features:

• Longer life than standard bulbs
• Manufactured by trusted OEM light source supplier
• Legal for on road use
• Light bulbs dim over time and require replacement
• Replace in pairs for optimal performance

LED miniature bulbs deliver style and performance for your car or truck. Choose red LED bulbs when replacing the tail and brake light of your vehicle for optimal visibility. Easy-to-install with a robust design and high-quality components, LED replacement bulbs are a simple and cost-effective way to upgrade your vehicles lighting. Also available in super bright white and an array of colors.

Product Features:

• HIGH EFFICIENY: Delivers greater clarity with less power consumption and longer bulb life when compared to standard incandescent bulbs
• RELIABLE: Thermal management to maximize life, matched with robust design that withstands temperature and shock for optimal performance
• INSTANT ON: Provide full brightness instantly, giving drivers around you more time to react, compared to the slower light-up with Incandescent bulbs
• BRIGHT RED LIGHT: For use behind red lens, brake light replacement
• HYPERFLASH: For some vehicles, installing a load equalizer may be required to eliminate hyper flash or dashboard error messages
• EASY DIY INSTALLATION: A direct replacement for the factory bulbs in your vehicle, no modification required
• SMART MAINTENANCE: Always replace bulbs in pairs to ensure equal brightness and color
• SAFETY: High-quality SYLVANIA bulbs are designed to perform to all relevant safety standards set for the lighting application
• TRUSTED BRAND: SYLVANIA is a trusted OEM automotive lighting manufacturer, with over 100 years of superior optical engineering experience

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New CAPA Certified Standard Replacement Passenger Side Tail Light Lens and Housing, 1500/2500 Light Duty, Fleetside. It is Designed to Replace Your Existing Tail Light. Check to Be Sure It Fits Your Vehicle.

Product Features:

• 1500 And 2500 Light Duty Fleetside, Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New CAPA Certified Standard Replacement Driver Side Tail Light Lens and Housing, 1500/2500 Light Duty, Fleetside. It is Designed to Replace Your Existing Tail Light. Check to Be Sure It Fits Your Vehicle.

Product Features:

• 1500 And 2500 Light Duty Fleetside, Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

• Designed to OE standards for ease of installation
• Featuring a special-design spring and contact arrangement to reduce arcing for extended service life
• Copper alloy conductors ensure superior electrical conductivity with low resistive losses
• Our parts are 100% tested to verify both mechanical and electrical switching performance.
• Robust design and high grade materials meet the stringent demands of today’s service professional
• BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

GM Genuine Parts Brake Light Switches are designed, engineered, and tested to rigorous standards, and are backed by General Motors. It is electrically powered and causes the brake lights to engage when the brakes are applied. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE). Product contains Decabromodiphenyl ether (decaBDE): Not for sale in Washington D.C.; Not for import into European Union (EU).

Product Features:

• Works with vehicle electronics to help optimize vehicle capabilities
• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

• Premium quality materials for longer service life
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Dorman’s Socket Assemblies are engineered with extra-long leads and multiple butt connectors.

Product Features:

• No special tools required for installation
• Easy to install
• Manufactured to strict engineering quality standards
• Constructed of high-quality materials for long-lasting durability

NSF CERTIFIED parts bear the seal of the National Sanitation Foundation guaranteeing fit and quality equal to original equipment. These parts may be required if your insurance company is paying for the repair. Due to precision design and exacting quality control standards, TYC replacement lamps meet SAE/DOT regulations, and are FMVSS 108 compliant. TYC NSF certified lamps further validates the quality through third party, NSF, certification. NSF certified lamps are accepted by many major insurance companies as an acceptable replacement for original equipment parts. Each TYC replacement lamp is manufactured with similar plastics materials as the original equipment and undergo rigorous testing to ensure your safely during day and night use. Your vehicle’s lamps are an essential part of your vehicle’s safety features, and can mean the difference between getting into or avoiding an accident.

Product Features:

• OE-comparable harness
• OE-comparable mounting provisions ensure drop-in precise fitment
• Rigorous and accelerated cycling tests to ensure product service quality and durability
• Special coating on the lens surface prevents hazing and fading ensuring proper illumination and operational safety
• Meet or exceed DOT/SAE standards with particular consideration for photometric and safety compliance

The SYLVANIA Miniature Bulb is designed to meet DOT regulations for performance and life. This bulb is legal for on road use and provides easy installation as a direct replacement bulb. SYLVANIA lamps are made from high quality material for long lasting durability.

Product Features:

• Dependable light source to meet DOT regulations
• Made from high quality material for long lasting durability
• Produced by a trusted OEM (Original Equipment Manufacturer) light source supplier
• Easy installation as a direct replacement bulb
• Legal for on road use

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

• Premium quality materials for longer service life
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New CAPA Certified Standard Replacement Driver Side Tail Light Lens and Housing, With Dark Trim, for Fleetside Models, Except 3500 Dually. It is Designed to Replace Your Existing Tail Light. Check to Be Sure It Fits Your Vehicle.

Product Features:

• With Dark Trim, Fleetside Models, Excludes 3500 Dually, Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New CAPA Certified Standard Replacement Passenger Side Tail Light Lens and Housing, With Dark Trim, for Fleetside Models, Except 3500 Dually. It is Designed to Replace Your Existing Tail Light. Check to Be Sure It Fits Your Vehicle.

Product Features:

• With Dark Trim, Fleetside Models, Excludes 3500 Dually, Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Economy Replacement Passenger Side Tail Light Lens and Housing, With Dark Trim, Fleetside Models, Except 3500 Dually. It is Designed to Replace Your Existing Tail Light Assembly. Check to Be Sure It Fits Your Vehicle.

Product Features:

• With Dark Trim, Fleetside Models, Excludes 3500 Dually, Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

The Spyder Auto Group has been serving the auto industry for nearly a decade. We specialize in wholesale distribution of automotive products. We are the leading providers of aftermarket lighting, tuning and styling auto parts in the U.S.. Our business principle allows us to help customers customize their vehicle according to their style and preference. Spyder Auto stands by their products to ensure excellent quality control and customer support. Spyder Auto sells and distributes products such as, Projector headlights, Crystal headlights, Tail lights and Fog lights. We are constantly expanding our application line to provide the latest products that this industry has to offer. The quality lighting products offered by Spyder Auto are compliant with all applicable federal regulations. The quality lighting products offered by Spyder Auto are compliant with all applicable federal regulations. Unless otherwise noted, all products are D.O.T. Compliant and satisfy Federal Motor Vehicle Safety Standards (FMVSS) code no. 108 and are not only ISO-9000 certified but also ISO-9002 certified as well.

Product Features:

• Greatly Enhances The Look Of Your Vehicle
• Made Of High Quality Materials To Ensure Appearance, Durability And Fitment
• Designed To Provide Improved Illumination For Added Safety
• Bright LEDs Will Increase Your Visibility To Other Road Users

The Spyder Auto Group has been serving the auto industry for nearly a decade, specialize in wholesale distribution of automotive products. Spyder Auto Group are the leading providers of aftermarket lighting, tuning and styling auto parts in the U.S.

Product Features:

• Greatly Enhances The Look Of Your Vehicle
• Designed To Provide Improved Illumination For Added Safety
• Made From High Quality Materials To Ensure Appearance, Durability And Fitment
• Install In The Same Way As OE Lights

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Economy Replacement Driver Side Tail Light Assembly, Fleetside, Except 3500 Model. It is Designed to Replace Your Existing Tail Light Assembly. Check To Be Sure it Fits Your Vehicle.

Product Features:

• Fleetside Models, Excludes 3500 Series, Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Economy Replacement Passenger Side Tail Light Lens and Housing, Fleetside, Except 3500 Series. It is Designed to Replace Your Existing Tail Light. Check to Be Sure It Fits Your Vehicle.

Product Features:

• Fleetside Models, Excludes 3500 Series, Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New CAPA Certified Standard Replacement Passenger Side Tail Light Lens and Housing, Fleetside Models, Except 3500 Series. It is Designed to Replace Your Existing Tail Light. Check to Be Sure It Fits Your Vehicle.

Product Features:

• Fleetside Models, Excludes 3500 Series, Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Need a new tail light assembly that looks, fits and performs like the original, for less than going back to the dealership? This replacement tail light was built to match the stock tail light on specific vehicles for a seamless fix.

Product Features:

• Reliable replacement – this tail light assembly is designed to look and function like the original part on specific vehicles
• Excellent value – original equipment quality at a lower price
• Durable materials – rigid plastic protects against weather and road conditions
• Easy installation – built to match the exact original dimensions for proper fit