Chevrolet Silverado 1500 Fuel Injectors

The Edelbrock Pro-Flo 4 EFI Kit No. 35700 for Chevrolet LS GEN III/IV engines is a Sequential Port EFI System equipped with the latest technology and features. The EFI system comes complete with a traditional 4150-Style satin finish Victor Jr. cathedral port single plane intake manifold and 29 Lb./Hr injectors capable of 450 HP with 58 p.s.i. fuel pressure. The new Pro-Flo 4 EFI systems feature an all-new ECU with a faster processor, a water proof design and measures half the depth of the previous ECU. It also has an upgraded Bluetooth chip that is faster, more reliable and will not drop connection. We’ve added more features for the advanced tuner giving you control over air-fuel ratios, ignition curve, idle speed, acceleration fuel, coolant fans, Rev limiter while retaining the simplicity Pro-Flo is known for. The key to the system is our exclusive E-Tuner 4 app with dyno developed base calibrations. The E-Tuner 4 app uses a Bluetooth wireless connection to communicate with the ECU’s self-learning capability to continually adjust the calibration to get the maximize performance of your engine. E-Tuner 4 features a simple and easy to use setup wizard to help you get started as well as multiple dash displays so you can monitor your engines vitals. The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet.

WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.

Product Features:

• Application matched components ensure fuel injection system meets all emission regulations.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

Mass Air Flow Sensor

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered and manufactured specifically for the repair environment
• Unsurpassed quality you can trust
• Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

• All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
• MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
• MAHLE gaskets is the leader in Domestic, Asian and European applications
• The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

GM Genuine Parts Fuel Pressure Relief Valve Caps are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

GM Genuine Parts Fuel Injector Seal Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help provide liquid-tight connections between the fuel injector and related components. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• Helps provide a seal to prevent fuel leaks
• Helps seal combustion chamber from the elements
• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Includes hard to find or previously dealer-only components.

Product Features:

• Premium OE quality materials
• Services one injector

This premium tool kit is designed to ensure the correct installation of the combustion seal on Gasoline Direct Injectors (GDI), which require replacement any time the injector is reinstalled. This special tool allows for the expansion of the combustion seal to allow installation onto the injector’s tip and resizing tools to provide precise dimensioning to ensure proper combustion sealing. Constructed of high-quality stainless steel the tool will provide years of trouble-free service and can be used on over 100 unique styles of GDI injectors.

Product Features:

• Includes two expansion cones
• Includes two resizing tools
• Includes one seal installation collet
• Includes hard case
• Includes instruction manual

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

The Carquest line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the USA. Injectors are thoroughly tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function.

Product Features:

• Includes six premium fuel injectors
• Each unit is 100% tested to OE specifications
• Includes new o-rings and seals made of premium OE quality materials
• Includes application specific technical bulletin, where applicable

The Carquest line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the USA. Injectors are thoroughly tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function.

Product Features:

• Includes eight premium fuel injectors
• Each unit is 100% tested to OE specifications
• Includes new o-rings and seals made of premium OE quality materials
• Includes application specific technical bulletin, where applicable

Automobiles in the 21st century have replaced the more conventional throttle cable technology for an ECM (Electronic Control Module) that translates pedal travel into electronic signals in order to provide power to the wheels. The ETC system (Electronic Throttle Control), also known as drive-by-wire, has the unfortunate downside of delayed throttle response and subdued acceleration, creating problems in certain circumstances such as up-hill starts, quick gear changes, overtaking, etc. The Sprint Booster aims to overcome this throttle response delay for ETC-equipped vehicles, providing crisp on-tap acceleration at the driver’s disposal.

Product Features:

• Reduces Throttle Response Time
• Improves Acceleration
• Easy To Install
• Does Not Affect The Vehicles Electronic System

GM Genuine Parts Fuel Injection Throttle Control Actuator Modules are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These modules are electrically operated motor assemblies that control throttle plates. They receive an electrical signal from the engine control module and open throttle plates based on input from the accelerator pedal module. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:

• Each unit is 100% tested to OE specifications
• Includes new O-rings and seals made of premium OE quality materials
• Includes application specific technical bulletin, where applicable

The CARQUEST line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the USA Injectors are thoroughly tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function.

Product Features:

• Each unit is 100% tested to OE specifications.
• Includes new O-rings and seals made of premium OE quality materials.
• Includes application specific technical bulletin, where applicable.

GM Genuine Parts Fuel Injector and Insulator Retainer Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

Precision is key for the fuel pressure regulator on any vehicle. At Delphi, we use OE engineering to test our regulators and fuel technologies to ensure the utmost performance and durability. Our Nitrile¿ diaphragms are resilient against high-ethanol fuels, and we utilize two designs to help meet emissions standards while covering a wide array of domestic vehicles. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management. Visit our Resource Center for helpful tips and tricks on fuel pumps technologies and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:

• Precisely manufactured internal valves, diaphragms and springs means excellent performance under all engine operating conditions
• Quiet operation, no audible regulator noise
• Robust diaphragm materials means longer life, improved durability and compatibility with a wide range of fuels
• Consistent and predictable fuel pressure throughout system range of control provides great drivability

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered for the sealing repair environment
• Unsurpassed quality you can trust
• Validated for fit, form, and function

CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Includes hard to find or previously dealer-only components.

Product Features:

• Premium OE quality materials
• Services one injector

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered for the sealing repair environment
• Unsurpassed quality you can trust
• Validated for fit, form, and function

CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Includes hard to find or previously dealer-only components.

Product Features:

• Premium OE quality materials
• Services one injector

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered for the sealing repair environment
• Unsurpassed quality you can trust
• Validated for fit, form, and function

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

• Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.