Chevrolet S10 Suspension Parts

Please Select your Vehicle to See Exact Fit Parts

Essential Chevrolet S10 Suspension Parts

Energy Suspension – Hyper-Flex System (Part No.3.18106G)

Hyper-Flex System

from

$431.99
Product Features:
  • Incredible Improvement in Control
  • Maintains Proper Caster and Camber Alignment
  • Increase in Handling and Control
  • Greatly Reduce Wheel Hop on Quick Acceleration
  • Even Braking Control is Improved
  • Better Suspension Stability
See More

Royal Purple – Max Performance Synthetic Power Steering Fluid (Part No.01326)

Max Performance Synthetic Power Steering Fluid

from

$6.99
Max Performance Synthetic Power Steering Fluid

Carquest – RELAY – ACCESSORY (Part No.R3115)

RELAY - ACCESSORY

from

$27.49
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • Our units are all pre-aligned & pre-adjusted to save installation time and ensure proper switching.
  • A lubricated felt pad that lubricates the cam lobes on the vehicles distributor. This reduces wear on the point set rubbing block, extending the usable life of the part.
  • Ventilated where available, tungsten contacts, which run cooler and exhibit less erosion.
  • The copper-alloy shunt provides superior resistance to breakage, due to the flexing of the moving arm on the point set. It also significantly increases current conductivity over typical steel, shunts.
See More

Energy Suspension – Control Arm Bump Stop Set (Part No.3.9102R)

Control Arm Bump Stop Set

from

$11.99
Energy Suspension performance bump stops help cushion a collapsing suspension, preventing bottoming-out and expensive vehicle damage. Hyper-Flex performance polyurethane bump stops for control arms, traction bars, leaf springs, etc. are guaranteed to last longer and operate more efficiently than original rubber stops. The smaller, general purpose bullet shaped snubber is ideal for control arms. the low profile button head is for use when clearance is limited. Our large competition race style bump stops smooth out compression better and have a large reinforced metal plate welded to the mounting plate and molded-in. Each style is specially designed for a perfect and custom fit and each style has it’s own durometer, hardness, characteristics. Energy’s wide selection of bump stops are available in red or black color.

Product Features:
  • Made of Superior Hyper-Flex+ Material
  • Helps Prevent Damage to Control Arm
See More

Rare Parts – Control Arm Bushing (Part No.RP16840)

Control Arm Bushing

from

$43.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Reduces vibration
  • Torsional rubber bushings
  • UV resistant
  • No Squeak
See More

Dorman – Control Arm Shaft Kit (Part No.520-192)

Control Arm Shaft Kit

from

$48.99
This suspension control arm shaft kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment control arm shafts on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Carquest Premium – Multi-Use Connector (Part No.PTC2342)

Multi-Use Connector

from

$94.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Product constructed to meet all design and operating characteristics as intended by the manufacturer.
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

MOOG – Leaf Spring Shackle Bushing (Part No.K200802)

Leaf Spring Shackle Bushing

from

$17.79
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Restores like-new steering and handling
  • Engineered to provide long life and dependability
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
See More

Belltech – 2 Or 3 Inch Drop, Shock Absorbers Not Included, With Springs (Part No.23225)

2 Or 3 Inch Drop, Shock Absorbers Not Included, With Springs

from

$293.99
Belltech introduces an advanced lowering kit which includes Belltech high quality coil springs and vehicle specific upper spring or strut mount spacers.

Product Features:
  • Combine With Other Lowering Components For Addition Lowering
  • Each Coil Is Manufactured From Chromium Alloy Steel And Is Wound, Shot Peened Then Powder Coated To Exact Specifications To Assure The Proper Ride Height, Ride Quality
  • Engineered For Performance And Comfort
  • Lower Center Of Gravity
  • Reduce Body Roll
See More

MOOG – Leaf Spring Shackle Bushing (Part No.SB335)

Leaf Spring Shackle Bushing

from

$30.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Restores like-new steering and handling
  • Engineered to provide long life and dependability
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
See More

Monroe – Reflex Suspension Shock Absorber (Part No.911099)

Reflex Suspension Shock Absorber

from

$73.99
Ideal for vehicles with a higher center of gravity, Monroe Reflex light truck shock absorbers feature ASD valving technology that automatically adjusts the unit to absorb the impact, helping to reduce vehicle roll and dive.

Product Features:
  • IMPROVES STABILITY – ASD (Acceleration Sensitive Damping) valving technology adjusts to impacts, reducing roll and dive for vehicles with a higher center of gravity
  • EXCEPTIONAL HANDLING – Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
  • CONSISTENT RIDE – OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown while larger reserve tube holds more fluid to run cooler
  • CONTROL AND DURABILITY – Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
  • IMPROVES PERFORMANCE – Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration
  • BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
  • BUY WITH CONFIDENCE – Comes with Monroe’s Limited Warranty and exclusive Feel the Difference
  • 5/8 inch Piston Rod: Heavy-duty nitrocarburized rod for long service life. On non-dust shield units only
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

MOOG – Coil Spring Set (Part No.5660)

Coil Spring Set

from

$131.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • 100% Load tested
  • Easy to install
  • Provides like-new steering
  • Designed to lower stresses for longer service life
  • Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
See More

Dorman – Help – Leaf Spring Inserts (Part No.31067)

Leaf Spring Inserts

from

$13.99
This leaf spring insulator is designed to match the fit and function of the original insulator on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this leaf spring insulator is designed to match the fit and function of the original insulator on specified vehicles
  • Restores functionality – reliable replacement for an original part that has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Monroe – Rear Suspension Shock Absorber Air Hose Kit (Part No.AK64)

Rear Suspension Shock Absorber Air Hose Kit

from

$25.99
Monroe is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.
See More

Dorman – Leaf Spring Insert (Part No.924-070)

Leaf Spring Insert

from

$14.99
This leaf spring bumper spacer is designed to match the fit, appearance and function of the original spacer on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this leaf spring bumper spacer is designed to match the fit, appearance and function of the original spacer on specified vehicles
  • Restores functionality – this spacer is made to fully restore part functionality after the original part fails
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Monroe – Shock-Mate Suspension Shock Absorber Bellows (Part No.SA1997)

Shock-Mate Suspension Shock Absorber Bellows

from

$26.99
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:
  • Protects the shock’s piston rod from damage
  • Universal design for easy installation
  • Tie-strap included for a secure fit
  • Constructed from high quality urethane for maximum durability
  • Multiple color choices available
See More

Firestone Ride-Rite – Portable, Maximum 130 Psi, 18 Amps, With Compressor Only (Part No.9284)

Portable, Maximum 130 Psi, 18 Amps, With Compressor Only

from

$253.99
The Air Command Standard Duty Dual Electric Air Compressor System Kit Allows You To Adjust Your Air Springs With The Touch Of A Button. It Offers A Built in Air Source For Your Suspension System, Making It Easy To Alter Your Springs To Align With The Load Type And Environment. When Shopping For Air Accessories, You will Find That Firestone Air Command Standard Duty Dual Electric Air Compressor System Kit Is Designed To Have A Couple Of Special Benefits. First, The Air Command Standard Duty Dual Electric Air Compressor System Kit Comes Ready To Install, So You Can Set It Up And Get Back To The Road where You Want To Be. Just Connect A Few Wires To The Compressor And A Few To Your Vehicle. The Air Lines And Wiring Harness Can Be Plugged Into The Same Side Of The Unit For Smoother Routing Of Lines And Power Supply. After The Air Command Standard Duty Dual Electric Air Compressor System Kit Is Properly Installed, You Can Make Pressure Adjustments By Pressing A Single Button. This Air Command Standard Duty Dual Electric Air Compressor System Kit Component Allows For Side To Side Or Front to rear Leveling, Real time Pressure Readout, And Dual Left And Right PSI And Pressure Control Readouts. The Air Command Standard Duty Dual Electric Air Compressor System Kit Easy to read Needle Gauge Can Be Viewed Day Or Night, Without Straining Or Squinting Your Eyes. Prior To Installing The Air Command Standard Duty Dual Electric Air Compressor System Kit, Review The Instructions And Identify All Of The Components To Help Make Sure You Get Maximum Performance From Both Your Air Springs And Air Command Standard Duty Dual Electric Air Compressor System Kit. The Installation Steps Are Different Depending On Whether You are Enhancing An Existing Air Helper Spring System With The Air Command Standard Duty Dual Electric Air Compressor System Kit Or Installing It With A New Air Spring System.

Product Features:
  • Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
  • Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
  • Provides An Instant Air Source For The Air Helper Springs Or Accessories
  • Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
  • Light Duty Compressor Specs (120 PSI Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)
See More

Dorman – Suspension Leaf Spring (Part No.22-1141)

Suspension Leaf Spring

from

$584.99
Properly functioning leaf springs hold the weight and payload of a vehicle or trailer and are essential to suspension performance and passenger comfort. Check the product attributes to select the right leaf spring for your application.

Product Features:
  • Direct replacement – these leaf springs are designed to match the fit and function of the original leaf springs on specific vehicles or trailers
  • Ideal solution – seamlessly replaces leaf springs damaged by overloading, collision, cracking or corrosion, or are due for replacement
  • Durable construction – made from quality materials to strict specifications to ensure reliable performance and long service life
  • Trustworthy quality – engineered, manufactured and supported by the premier aftermarket leaf spring provider in the USA
See More

KYB – High Pressure Monotube Gas Shock (Part No.565064)

High Pressure Monotube Gas Shock

from

$109.99
Tough conditions demand tough truck shocks. The large bore KYB MonoMax provides the additional stability that heavier, more powerful or high center of gravity vehicles demand. The KYB MonoMax is a heavy duty monotube shock absorber that provides the most handling, control and durability of any KYB shock; and its just for trucks. The MonoMaxs tough design automatically adjusts to driving conditions with fade-free performance. The KYB MonoMax has an outstanding reputation for vehicles that do real work, go off-road, tow a trailer or haul heavy loads. It uses a work-ready, zinc-coated steel piston ring and includes an off-road dust boot.

Product Features:
  • Maximum Performance Upgrade With Up To 40% More Damping Performance Than Standard Shock Absorbers
  • Perfect Solution When You Need To Upgrade Suspension Performance On Your Gm Truck
  • Truck Monotube Design Outperforms All Other Standard Shock Absorbers
  • Zinc-Coated, Stainless Steel Piston Ring Provides A Positive Seal In The Most Extreme Conditions
  • Rubber Boot To Protect The Shaft And Keep Dirt And Debris Away From The Seals
  • Engineered To Help Vehicles With Electronic Safety Systems (Esc, Abs, Etc.)
See More

MOOG – Leaf Spring Shackle (Part No.K150382)

Leaf Spring Shackle

from

$71.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Engineered to provide long life and dependability
See More

Monroe – Max-Air Air Adjustable Air Shock Absorber, Pack of 2 (Part No.MA759)

Max-Air Air Adjustable Air Shock Absorber, Pack of 2

from

$137.99
Ideal for hauling, Monroe Max-Air shock absorbers can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (Capacity is limited by vehicle suspension, tires and transmission. See vehicle owner’s manual.)

Product Features:
  • MAINTAIN RIDE HEIGHT UNDER LOAD — Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission; see owner’s manual)
  • EASY TO ADJUST — Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor; pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
  • EXCEPTIONAL HANDLING — Full-displaced valving on compression and extension cycles for a smooth ride
  • BUILT TO LAST — Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
  • CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
  • Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
  • Special Air Fitting: Resists air leakage.
  • Upper Mount Type: Cross Pin Mount – Closed Ended, 5/16″ Hole ID (Both Ends) X 2.7/8″ Pin Length (Hole Center to Center)
See More

Firestone Ride-Rite – Includes Heavy Duty Compressor/3 Gallon Air Tank/25 Foot Extension Hose (Part No.2239)

Includes Heavy Duty Compressor/3 Gallon Air Tank/25 Foot Extension Hose

from

$703.99
Our Air Command systems give customers the ability to conveniently adjust their air springs with the touch of a button thanks to our Air Command Air Compressor Kits. Our designs provide an instant air source to a vehicle air suspension system, giving users the freedom to adjust their air springs to accommodate different loads and road conditions from both inside and outside of the vehicle.

Product Features:
  • The Easy To Read Digital Display Is Designed So You Can See It During The Day, But It Does Not Blind You At Night
  • The Wireless Remote Utilizes A New Sleep Cycle And LED Display That Reduces Energy Use And Improves Battery Life
  • Easy Installation
See More

Rare Parts – Coil Spring Insulator (Part No.RP46346)

Coil Spring Insulator

from

$39.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Reduces vibration
  • Reduces road noise
  • UV resistant
  • No Squeak
See More

Dorman – Suspension Control Arm Bumper (Part No.533-615)

Suspension Control Arm Bumper

from

$7.29
This suspension control arm bumper is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Monroe – Load Adjusting Rear Suspension Shock Absorber and Coil Spring Assembly, Pack of 2 (Part No.58523)

Load Adjusting Rear Suspension Shock Absorber and Coil Spring Assembly, Pack of 2

from

$215.99
Ideal for light trucks that that tow or carry varying loads, Monroe load adjusting shocks include a heavy gauge calibrated spring that adjusts to road and weight conditions to provide extra control when operating conditions get more demanding.

Product Features:
  • REDUCES SAG UNDER LOAD – Ideal for occasionally hauling or towing varying loads, heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission, see owner’s manual)
  • EXCEPTIONAL HANDLING – Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency
  • CONSISTENT RIDE – OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces
  • LONGER SERVICE LIFE – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life
  • IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • Nitrogen Gas Charged: For Improved Ride & Handling, Helps Maintain Tire To Road Contact By Reducing Aeration – On Most Applications
  • 5/8 nitrocarburized rod for long service life.
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
  • Upper Mount Type: Cross Pin Mount – Closed Ended, 5/16″ Hole ID (Both Ends) X 2.7/8″ Pin Length (Hole Center to Center)
See More

Helping You Find the Right Suspension Parts for Your Chevrolet S10

You love your S10. So we’ve made it easier than ever to help you find Chevrolet S10 Suspension Parts in our online catalog. Our inventory holds 124 aftermarket and OEM Suspension Parts for your Chevrolet S10, ranging from $6.99 to $1,043.00.

We offer parts from 16 brands trusted to make quality Suspension Parts for your Chevrolet S10. Before you buy, take some time to read through customer reviews. We currently have 43,256 reviews of Chevrolet S10 Suspension Parts from previous customers. Some of the top rated parts include Load Adjusting Rear Suspension Shock Absorber and Coil Spring Assembly, Pack of 2 with 4.6 stars and Shock-Mate Suspension Shock Absorber Bellows with 4.6 stars.

Find your S10 Suspension Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Chevrolet S10 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Suspension Parts Brands for Your Chevrolet S10

Our inventory holds Suspension Parts for your Chevrolet S10 from 16 trusted brands. You’ll find OEM and aftermarket parts from brands like Valvoline, Monroe, and Moog, all of which can keep that Chevrolet happy.

FAQs for Chevrolet S10 Suspension Parts

What are the most purchased Suspension Parts for the Chevrolet S10?

Out of 124 Suspension Parts for the Chevrolet S10, the most popular in our inventory are:
Gas-Matic LT Suspension Shock Absorber
from $37.99
(50)
Gas-Matic LT Suspension Shock Absorber
Front Shock and Struts
Gas-Matic Suspension Shock Absorber
from $37.99
(31)
Gas-Matic Suspension Shock Absorber
Front Shock and Struts
Position Leaf Spring Shackle Kit
from $64.99
(20)
Position Leaf Spring Shackle Kit
Leaf Spring Shackles

What are the top-rated Chevrolet S10 Suspension Parts?

Top-rated Suspension Parts for your Chevrolet S10 based on customer reviews/ratings are:
Load Adjusting Rear Suspension Shock Absorber and Coil Spring Assembly, Pack of 2
from $215.99
(47)
Load Adjusting Rear Suspension Shock Absorber and Coil Spring Assembly, Pack of 2
“I have a set of four but don’t have a vehicle to put them on anymore what all will they fit”
Shock-Mate Suspension Shock Absorber Bellows
from $26.99
(35)
Shock-Mate Suspension Shock Absorber Bellows
“Used this to replace the torn shock boot on my Goldwing 1500 motorcycle. it fit well, used a tie warp and it was good to go”
Max-Air Air Adjustable Air Shock Absorber, Pack of 2
from $137.99
(20)
Max-Air Air Adjustable Air Shock Absorber, Pack of 2
“I absolutely love these air shocks. I just carried close to 1000 LBS of wood 800 miles and did not bottom out once. Great for those times you need t”