Chevrolet K20 Wheels and Tires

New Standard Replacement Driver Or Passenger Side Wheel House

Product Features:

• Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

If you have custom steel or mag wheels that are not designed without a provision for a center cap, you’re probably looking at an ugly stock dust cap in the center of your front wheels. This chrome dust cap fixes that problem, and is a direct replacement for stock cap 2.08 inches in diameter. Two per set.

Product Features:

• Adds the finishing touch to custom wheels
• sold in a pair
• Easy Installation
• 2 Per Set

Are you looking to replace your manual locking hubs? Rugged Ridge has you covered with this pair of OE replacement manual locking hubs that fit the 30-spline Dana 50 and Dana 60 front axle shafts in 76-90 1-ton Chevy trucks, 90-93 3/4 ton and 1-ton Dodge

Product Features:

• Hub Service Kit

Value-priced seal meets all cataloged application requirements.

Product Features:

• Brand may vary by location

The convenient way to order wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. McGard manufactures wheel locks and lug nuts in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts are guaranteed for life not to rust, chip or peel. Designed and built for the real world. Think about it: harsh elements, nasty corrosive wheel cleaners, overzealous impact guns, loose fitting lug wrenches and lead-foot drivers. This kind of treatment destroys ordinary lug nuts. McGard lug nuts can take the punishment and keep your wheels looking beautiful. This product may contain globally sourced materials/components.

Product Features:

• User friendly key guides the key into the lock pattern for easy installation and removal.
• The computer generated key designs allow for an infinite number of key patterns.
• The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
• Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
• McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
• For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
• Set of 28 Lug Nuts, 4 Wheel Locks, 1 Key, & 1 Key Storage Pouch

These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.

Product Features:

• Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
• Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
• Durable construction – designed and manufactured to strict specifications for reliable performance
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

Product Features:

• Durable material – carbon steel meets SAE automotive industry standards for strength and hardness
• Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
• Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
• Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

• Premium bearing design matches OEM specifications
• Precision manufactured using premium-grade steel for outstanding durability and performance
• Crowned raceways and rollers to ensure even load distribution for maximum life
• Industry leading coverage
• Professional technicians know they can depend on National

Value-priced bearing meets all cataloged application requirements.

Product Features:

• Brand may vary by location

Schrader TPMS Solutions, a brand of Sensata Technologies, is the leading global manufacturer of tire pressure monitoring systems (TPMS). Schrader is a pioneer in TPMS and its direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms. Schrader offers a complete line of TPMS solutions, that help manage your shop’s needs from start to finish, offers ranging from their single-SKU, programmable EZ-sensor® family of products to pre-programmed OE replacement sensors, and programming and diagnostic tools, retrofit kits, and the industry’s first free online TPMS training www.TPMSAcademy.com For more information about Schrader and its products visit: www.SchraderTPMS.com

Product Features:

• Schrader TPMS sensors and valves are designed and manufactured to meet all OEM quality and functional specifications
• Sensor must be programmed to specifi Y/M/M vehicle
• Compatible with most programming tools
• Make sure that your TPMS programming tool is updated to it’s latest version
• Combines 314.9, 315 & 433 MHz application into one sensor
• Future proofed to support new and pending OE system technologies
• Optimizes inventory levels and returns
• Reduces overal cost and increases speed of service
• Use service kit 20018 to replace the rubber valve assembly
• Valve Core Torque = 3.5 in-lbs (0.4 Nm)
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.

Product Features:

• MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
• COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
• FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
• DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
• COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

Differential Bearing

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

• Premium bearing design matches OEM specifications
• Precision manufactured using premium-grade steel for outstanding durability and performance
• Crowned raceways and rollers to ensure even load distribution for maximum life
• Industry leading coverage
• Professional technicians know they can depend on National

Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.

Product Features:

• MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
• COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
• FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
• DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
• COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.

Product Features:

• MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
• COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
• FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
• DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
• COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
• ADJUSTABLE: 0-40 degree adjustable stem fits into more aftermarket rim sets
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

• Designed to be used on worn axle shafts
• Precision manufactured using premium-grade steel for outstanding durability and performance
• Premium double seal design keeps out dirt and contaminants and retains lubrication
• Industry leading coverage
• Professional technicians know they can depend on National

Value-priced bearing meets all cataloged application requirements.

Product Features:

• Brand may vary by location

Chrome plated lug nuts lead a tough life. Think about it, harsh elements, nasty corrosive wheel cleaners and lead-foot drivers. Not to mention overzealous impact guns and loose fitting lug wrenches. This kind of treatment destroys ordinary lug nuts which turns even the best looking wheels ugly. Tough Nuts can take the punishment and keep your wheels looking beautiful. Tough Nuts are guaranteed for life not to rust, chip or peel. They are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. Tough Nuts are designed and built for the real world, because life is tough.

Product Features:

• Guaranteed for life not to rust, chip, or peel.
• Every McGard Tough Nut lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
• McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
• For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.

These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.

Product Features:

• Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
• Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
• Durable construction – designed and manufactured to strict specifications for reliable performance
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

Outer wheel bearing retaining snap ring for GM 14T.

Product Features:

• Outer wheel bearing retaining snap ring
• Fits GM 10.5″ 14 bolt truck

Drive flange, 19 spline inner, 48 spline outer.

Product Features:

• Drive flange
• Fits Dana 44
• 19 spline
• One single flange

Yukon hardcore drive flange kit for Dana 44, 30 spline outer stubs. Yukon engraved caps.

Product Features:

• Drive flange kit
• Fits Dana Spicer 44 with 30 spline outer axles
• Includes two drive flanges, two Yukon engraved caps and all necessary hardware

Value-priced seal meets all cataloged application requirements.

Product Features:

• Brand may vary by location

Value-priced seal meets all cataloged application requirements.

Product Features:

• Brand may vary by location