Chevrolet K10 Pickup Performance and Racing Products

Essential Chevrolet K10 Pickup Performance and Racing Products

B & M – Automatic Shifter, Pro Stick Shift with CVR (Part No.80706)

Automatic Shifter, Pro Stick Shift with CVR

from

$429.99
The Original Pro Stick shifter delivers rock-solid performance, mixed with clean design cues and compact size. This is why you see so many Pro Stick shifters at the race track. We start off with a heavy duty steel base with a hardened steel gate plate, a reverse lockout feature that only requires one hand to operate, and complies with NHRA/IHRA safety rules. Then add the billet aluminum shift handle with classic white shift knob, lightweight aluminum trigger and finish it off with a brushed aluminum cover with quick release pins, and you end up with one good looking bullet-proof race shifter. Optional Forward and Reverse shift pattern gate plates are available for most popular 2, 3 and 4-speed transmissions. This model Pro Stick comes out of the box ready for action for most popular 3-speed transmissions, includes a 5-foot Super Duty shift cable, brackets, levers, hardware and detailed instructions for an easy installation. Be sure to check out all the optional Magnum Grip side grip plates including the one and two button 12-volt momentary switches or any of the other accessories we offer for the Pro Stick in the Shifter Accessories section. Notes: AOD requires installation kit #40496, AODE & 4R70W requires installation kit #40504, E40D & 4R100 requires installation kit #40505, 2004R & 700R4 require gate plate #80712, 4L60E – 4L85E equipped with PRNDL switch requires cable bracket kit #70499 and gate plate #80712. Overall Dimensions – 8.25L x 2.92W x 9.25H

Product Features:
  • All One-Handed
  • Reverse Lockout Meets NHRA And IHRA Requirements
  • Mount Directly To Floor/Chassis/Or w/Quick Release
  • Ultimate For Powerglide Applications
  • Lightweight Brushed Alum. Cover
  • Cover Removed Quickly and Easily
  • Includes 5 Ft. Super Duty Race Cable
  • Quick Change Plate Design
See More

Mr. Gasket – Premium Quality Thermostat Gasket with Solid Aluminum Carrier (Part No.738G)

Premium Quality Thermostat Gasket with Solid Aluminum Carrier

from

$31.99
Edge molded rubber water outlet gasket is reusable, great for engines that require regular disassembling for maintenance. Incorporates solid aluminum carrier for strength and rigidity. Can be used with OE replacement or aftermarket chrome water outlets. Requires no gasket sealer.

Product Features:
  • Edge Molded Rubber Water Outlet Gasket Is Reusable
  • Requires No Gasket Sealer
  • Solid Aluminum Carrier For Strength/rigidity
  • Reusable – Ideal for Engines That Are Frequently Taken Apart & Reassembled
See More

Mr. Gasket – Intake Gasket (Part No.116)

Intake Gasket

from

$40.19
Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. They provide excellent sealing and durability. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track.

Product Features:
  • Manufactured from cellulose/nitrile composition gasket material.
  • Provides excellent sealing and durability.
  • Can be trimmed if necessary for modified port applications.
  • Complete with manifold end seals and distributor gasket.
  • For OE replacement, high performance street, drag race and oval track use.
See More

Spectre – Pulley (Part No.4508)

Pulley

from

$81.99
Spectre’s high quality crankshaft, alternator and engine pulley sets are designed to help dress up your engine compartment. All of our pulleys are designed to work in OE applications and with the OE style serpentine or v-belt configuration.

Product Features:
  • Engine pulleys come in a chrome or polished finish
  • Designed for OE engine setup
  • Looks great
  • Easy to install
See More

Mr. Gasket – Ultra Seal: Sure-Lock Rocker Arm Nuts (Part No.920G)

Ultra Seal: Sure-Lock Rocker Arm Nuts

from

$64.19
These are high quality nuts with allen set screws to provide you with that positive lock needed for Race or original equipment Rocker Arms.

Product Features:
  • They Are Zinc Dichromate Plated Steel
  • They Have Black Oxide Coated Set Screws
  • Keeps Rocker Arms Positively Locked
  • (16) Rocker Arm Nuts w/ Locks 3/8″-24 Threads
  • Includes Locks and Hex Wrench
  • Shank O.D. .603″
See More

Rancho – RS5000 Steering Damper (Part No.RS5402)

RS5000 Steering Damper

from

$82.99
Ideal for off-road driving, towing and street applications, Rancho® RS5000® steering stabilizers enhance a vehicle’s performance and minimize on- and off-road driver fatigue by reducing wheel shimmy, bump steer and vibration.

Product Features:
  • IMPROVED HANDLING AND PERFORMANCE — Reduces wheel shimmy, bump steer and vibration which helps minimize on- or off-road driver fatigue
  • ACCOMMODATES LARGER TIRES — Engineered for vehicles with oversized wheels and tires
  • ENGINEERED TO LAST — Features protective boot to safeguard shock rod and oil seal
  • HANDLES EXTREME TEMPERATURE CHANGES — Twin-tube cellular gas design filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248°F
See More

Mallory – Unilite Electronic Ignition Distributor Series 37 (Part No.3748201)

Unilite Electronic Ignition Distributor Series 37

from

$437.99
The industry standard with adjustable mechanical advance curve. Triggered by photo-optic infrared LED system. Improved combustion efficiency and economy, increased spark plug life and cold weather starting, and maintenance free operation.

Product Features:
  • Improved Combustion And Economy
  • Increased Spark Plug Life
  • Improved Cold Weather Starting
  • Maintenance Free Operation
  • Accurate Spark Timing
  • Self-Lubricating Bushings
  • Years Of Trouble-Free Service
See More

Flowtech – Standard Header (Part No.11506FLT)

Standard Header

from

$232.99


Product Features:
  • Fuel Economy From The Engine
  • Leak Test For Max Performance
  • Mandrel-Formed Power Plenum
  • Leakproof O-Ringed Port Seals
  • Include All Mounting Hardware
See More

PerTronix – D660701 Rotor Flame-Thrower Billet Distributor (Part No.D660701)

D660701 Rotor Flame-Thrower Billet Distributor

from

$18.99
Rotor for Flame-Thrower cast distributors. Premium rotor with brass contact

Product Features:
  • PerTronix D660701 Rotor Flame-Thrower Billet Distributor
  • Rotor for Flame-Thrower cast distributors
See More

MSD Ignition – Distributor Cap; Alkyd; MSD Chevy V8 Distributor (Part No.8437)

Distributor Cap; Alkyd; MSD Chevy V8 Distributor

from

$48.49
All MSD extra duty distributor caps are designed with performance in mind and are molded from high quality, voltage insulating material and use low resistance terminals.

Product Features:
  • Update The GM Points Cap w/MSD Performance
  • High Quality; Voltage Insulating Material
  • Low Resistance
  • Performance replacement part
See More

Energy Suspension – Hyper-Flex System (Part No.3.18104R)

Hyper-Flex System

from

$359.99
Product Features:
  • Incredible Improvement in Control
  • Maintains Proper Caster and Camber Alignment
  • Increase in Handling and Control
  • Greatly Reduce Wheel Hop on Quick Acceleration
  • Even Braking Control is Improved
  • Better Suspension Stability
See More

Mallory – Distributor Wiring Harness (Part No.29349)

Distributor Wiring Harness

from

$30.49


Product Features:
  • Service Part
  • Makes Connections Quick And Easy
See More

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1004)

Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

from

$52.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
  • Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
  • Raises combustion sealing force to roughly three times that of standard head gaskets.
  • Steel wire rings for the greatest combustion seal strength.
  • Not intended for use in emission controlled vehicles.
See More

Mr. Gasket – Header Bolt Set (Part No.2210G)

Header Bolt Set

from

$41.99
Made of high quality stainless steel. These bolts will brighten up your hot rod, or improve the looks of your race car.

Product Features:
  • Bright Ball Burnish Finish
  • Made From 304 Stainless
  • Compact Hex Head Is Ideal Where Space Is Limited
  • 12 Per Set
  • Resist corrosion and provides a clean professional appearance
See More

Energy Suspension – Leaf Spring Bushing Set (Part No.3.2112R)

Leaf Spring Bushing Set

from

$70.99
Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.

Product Features:
  • Made of Superior Hyper-Flex+ Material
  • Adds Dramatic Amount of Performance/Durability
  • Helps Vehicle Be in Control
  • Allows the Suspension to Function Properly
See More

B & M – Performance Torque Converter for GM TH400, 350, & 375 Transmissions (Part No.20400)

Performance Torque Converter for GM TH400, 350, & 375 Transmissions

from

$299.99
Torque Converter – Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost

Product Features:
  • New Precision Pump Drive Tube
  • Pressure Tested
  • Fully Balanced
  • Needle Thrust Bearing
  • New Thrust Washer
See More

Holley – Mechanical Fuel Pump (Part No.12-454-11)

Mechanical Fuel Pump

from

$155.99
Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.

Product Features:
  • High Output Fuel Flow
  • Flows 110 gph Free Flow
  • Shutoff Pressure Pre-Set From 6.5 To 8 PSI
  • Fuel Pressure Regulator Is Not Required
  • Heavy Duty Construction For Continuous High rpm Operation
  • Fuel Body Casting Can Be Rotated For Plumbing Situations
  • Inlet And Outlet Tapped For 3/8 in. NPT
See More

Mr. Gasket – Chrome Valve Cover Wing Bolts (Part No.9824)

Chrome Valve Cover Wing Bolts

from

$15.99
Chrome-plated for beauty and durability, wing bolts make valve cover removal fast & easy. They are precision-engineered and feature extra-long threads to accommodate Mr. Gasket re-usable valve cover gasket & custom valve covers.

Product Features:
  • Fits Chevy V8
  • Standard Y Top 1/4 In-20 X 5/8 in L
  • Chrome Plated Steel
  • Overall Length: 4.64″
  • Installed Length: 4.00″
  • Pack of 4
See More

Accel – HEI Distributor Cap & Rotor Kit with Arc-Thru Protection (Part No.8122)

HEI Distributor Cap & Rotor Kit with Arc-Thru Protection

from

$42.99
ACCEL cap and rotor kits offer superior protection from “arc-thru” and crossfire. Features 60k V-rated alkyd compound, stress-relieved at molding to ensure stability. Brass inserts and steel rotor springs provide for high spark energy flow.

Product Features:
  • Features Protection From Arc Thru And Crossfire
  • Features 60k V Rated Alkyd Compound
  • Brass Terminals Inserts And Steel Rotor Springs
  • High Spark Energy Flow
See More

Weiand – Action Plus Water Pumps (Part No.9240P)

Action Plus Water Pumps

from

$215.99
Weiand’s light weight, performance aluminum mechanical Action-Plus water pumps give a weight saving of 30 percent to 50 percent over stock cast-iron pumps. These pumps feature a premium quality bearing and seal that have twice the load capacity of stock pumps. Weiand’s exclusive housing counter bore keeps the bearing form walking out. All pumps are designed with the necessary bracket bosses and water connections to fit popular street applications.

Product Features:
  • Twisted Snout Water Pump Design For Updated Style
  • Street Performance
  • Heavy Duty Shaft w/5/8 in. Pilot
  • Six-Blade Stamped Steel
  • Anti-Cavitation Impeller
  • 100 Percent Leak Tested
See More

Mr. Gasket – Precision Timing Tape (Part No.1588)

Precision Timing Tape

from

$21.79
Precision timing tape can be used on a factory balancer to create HP through accurate timing, and makes setting valve lash simple.

Product Features:
  • 6 3¿4″ diameter
  • 6 3┐4″ diameter
  • 305, 350 cu. in. 1969-93
  • Increased Performance
  • Set Valve Lash At Proper Time
See More

Motive Gear – Differential Mini Spool (Part No.MS12C)

Differential Mini Spool

from

$108.99


Product Features:
  • MINI SPOOL GM12 BOLT CAR & TRUCK STRANGE # 088430
See More

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1606)

Engine Valve Cover Gasket Set

from

$27.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
  • Not intended for use in emission controlled vehicles.
See More

Holley – Prem Street Carbs (Avengers) (Part No.0-80770)

Prem Street Carbs (Avengers)

from

$626.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

Product Features:
  • Vibratory Polished For Good Looks
  • Optimized Street Calibration That Works Out Of The Box
  • Factory Preset Electric Choke For Easy Startups
  • Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
  • No Unnecessary Trips Back To The Parts Store
  • Limited Lifetime Warranty
  • 100% Wet Flow Tested By Holley Technicians
  • Arrives Ready To Run
See More

Accel – Custom Fit Spark Plug Wire Set (Part No.8843)

Custom Fit Spark Plug Wire Set

from

$112.99
These ACCEL wire sets are custom tailored for true street and strip performance use. Features oversize 8.8 mm ultra performance wires and spark plug boots, 550 degrees Fahrenheit double silicone construction with fiberglass braid. Spiral wound steel core conductor.

Product Features:
  • 8.8mm Graphite Suppression
  • Silicone Spark Plug Boots
  • 550 Degree Double Silicone Construction
  • Fiberglass Braid
  • Carbon/Graphite Core
  • Magnetic Suppression
  • Fiberglass/Kevlar Core
  • 500 Ohms Resistance
See More

Chevrolet K10 Pickup Performance and Racing Products Categories

Helping You Find the Right Performance and Racing Products for Your Chevrolet K10 Pickup

You love your K10 Pickup. So we’ve made it easier than ever to help you find Chevrolet K10 Pickup Performance and Racing Products in our online catalog. Our inventory holds 350 aftermarket and OEM Performance and Racing Products for your Chevrolet K10 Pickup, ranging from $7.19 to $1,517.99.

We offer parts from 24 brands trusted to make quality Performance and Racing Products for your Chevrolet K10 Pickup. Before you buy, take some time to read through customer reviews. We currently have 14,283 reviews of Chevrolet K10 Pickup Performance and Racing Products from previous customers. Some of the top rated parts include Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny with 4.7 stars and Performance Exhaust Gasket Set for Enhanced Sealing and Durability with 4.6 stars.

Find your K10 Pickup Performance and Racing Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Chevrolet K10 Pickup part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Performance and Racing Products Brands for Your Chevrolet K10 Pickup

Our inventory holds Performance and Racing Products for your Chevrolet K10 Pickup from 24 trusted brands. You’ll find OEM and aftermarket parts from brands like Mr. Gasket, Accel, and K&N, all of which can keep that Chevrolet happy.
We have Rancho parts available for your Chevrolet K10 Pickup in categories like Performance Steering Products. Some of the top-rated Rancho parts in these categories are:
RS5000 Steering Damper
from $82.99
(1)
RS5000 Steering Damper
Performance Steering Stabilizers

Top-Rated Accel Performance and Racing Products

Leading Accel Performance and Racing Products

We carry Accel brand parts for your Chevrolet K10 Pickup across several catalog categories, including Performance Ignition Products and Performance Distributors. Some of our most reviewed Accel parts include:
HEI Distributor Cap & Rotor Kit with Arc-Thru Protection
from $42.99
(23)
HEI Distributor Cap & Rotor Kit with Arc-Thru Protection
Performance Distributor Cap and Rotor Kits
High Energy Ignition Coil for GM HEI - 1973-1991
from $100.99
(8)
High Energy Ignition Coil for GM HEI – 1973-1991
Performance Coils

FAQs for Chevrolet K10 Pickup Performance and Racing Products

What are the most purchased Performance and Racing Products for the Chevrolet K10 Pickup?

Out of 350 Performance and Racing Products for the Chevrolet K10 Pickup, the most popular in our inventory are:
Intake Manifold Bolts
from $15.49
(12)
Intake Manifold Bolts
Performance Intake Manifolds

What are the top-rated Chevrolet K10 Pickup Performance and Racing Products?

Top-rated Performance and Racing Products for your Chevrolet K10 Pickup based on customer reviews/ratings are:
Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny
from $456.99
(45)
Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny
“very easy to install…replaced older carb this one is fresh and runs smooth … needed to do minor ajustment .. but nothing anyone couldn’t do …”
Performance Exhaust Gasket Set for Enhanced Sealing and Durability
from $20.99
(14)
Performance Exhaust Gasket Set for Enhanced Sealing and Durability
“Put new headers on motor”
High-Performance Mandrel-Bent Headers with Leakproof O-Ring Seals
from $226.99
(13)
High-Performance Mandrel-Bent Headers with Leakproof O-Ring Seals
“I put these on a 1982 4×4 Chevy truck. Perfect fit. Easy to install. They looks good and sound good!”