Chevrolet Intercoolers

Turbo Bypass Valve

Gates Turbocharger Hose Kits offer the convenience of a complete solution in one kit. Not only are all the parts included, but the turbocharger hose features a construction far superior to the Original Equipment Manufacturer (OEM) equivalent.

Product Features:

• High-quality silicone cover provides extreme temperature resistance in high-temperature under-hood conditions
• Increased durability due to multiple layers of reinforcement, resulting in longer service life
• Specially formulated oil-resistant Fluorelastomer liner prevents damage
• T-bolt clamps with stainless steel band and bridge both resist corrosion and provide higher torque for optimal sealing
• The T-Bolt clamps feature a 301 stainless steel band and bridge to resist corrosion better than carbon steel bands.
• The stainless steel bands, produced with fully rounded edges, prevent hose damage.
• T-Bolt Clamps come with a nut to minimize loosening.

New Platinum Pro Turbocharger Intercooler/Charge Air Cooler, 1.4 Liter L4 Engine, With Automatic Transmission

Product Features:

• 1.4 Liter L4 Engine, With Automatic Transmission, Made Of Plastic and Aluminum
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Platinum Pro Turbocharger Intercooler/Charge Air Cooler, 1.4 Liter L4, With Manual Transmission

Product Features:

• 1.4 Liter L4, With Manual Transmission, Made Of Plastic and Aluminum
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Platinum Pro Turbocharger Intercooler/Charge Air Cooler, Models With Automatic Transmission

Product Features:

• Models With Automatic Transmission
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

All intercoolers are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensure optimal cooling.

Product Features:

• CARQUEST intercoolers are superior quality parts that meet or exceed OE specifications.
• Premium quality and performance is ensured through air-to-air wind tunnel testing.
• All intercooler core tubes are fitted with internal fins to ensure proper cooling of turbocharged air to increase intake air density while lowering its temperature, and providing increased engine efficiency.
• Cast aluminum manifolds are TIG welded to core headers to increase strength and durability.
• CARQUEST intercooler manifolds are ribbed just like the OE to prevent excessive breathing under pressure cycling.
• CARQUEST intercooler brackets are flanged to increase strength and rigidity for mounting.
• CARQUEST intercoolers include mounting grommets and hardware to make replacement easier.

This BladeRunner intercooler tube kit delivers more flow and is more robust to handle higher horsepower and boost than the factory intercooler tubes on the 2017-2019 GM L5P diesel. TIG-welded and designed from aircraft-grade, mandrel bent aluminum tubing,

Product Features:

• Outflows factory I/C tubes by up to 38% for improved performance
• TIG-welded, 3 & 3 1/2 IN mandrel-bent aluminum tubing for better flow
• Premium 5-ply silicone couplings rated at 200 PSI for long lasting durability
• Works with the factory intercooler

New Platinum Pro Charge Air Cooler/Intercooler, 6.6 Liter V8 Turbo Diesel

Product Features:

• 6.6 Liter V8 Turbo Diesel, Made Of Aluminum
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

BladeRunner charge tubes are designed to replace the factory intercooler tubes with a larger diameter and smoother flow path to reduce resistance and improve airflow. In addition, these tube upgrades incorporate NPT fittings for sensors and auxiliary input options.

Product Features:

• Mandrel-bent powder-coated charge pipes improve performance and appeal
• Includes high-temp couplings and stainless steel t-bolt clamps
• Hassle Free Installation
• Works w/Stock Intercooler

The Bladerunner charge pipes produce 20 hp and 63 lbs./ft/ torque and outflow the factory tubes by 45 percent. With the increased flow of this Charge Pipe it will reduce you exhaust gas temperatures by 100 deg..

Product Features:

• Powder Coated Wrinkle Black For Heat Resistance
• Works w/aFe or OE Intercooler
• High Quality Clamps and Hi Temp Silicone Couplings For Durability
• Increased Flow and Performance For More Power

New Platinum Pro Charge Air Cooler/Intercooler, Tube And Fin Type, 6.6 Liter V8 Turbo Diesel, All Aluminum Construction

Product Features:

• Tube And Fin Type, 6.6 Liter V8 Turbo Diesel, All Aluminum Construction, Made Of Aluminum
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

This BladeRunner Charge Pipe kit delivers 38% more flow and is more robust to handle higher horsepower and boost than the factory Charge Pipe on the 2017-18 GM L5P diesel. TIG-welded and designed from aircraft-grade, mandrel bent aluminum tubing, the BladeRunner I/C tube features factory mounting locations, quality hardware and 5-ply silicone couplings for a secure, hassle free installation. Flow and Performance: This hot side tube is constructed of 3″ mandrel bent, powder coated aluminum tubing for maximum flow and performance. The smooth transition bends decrease turbulence and minimize pressure loss, increasing horsepower, torque and lowering EGT’s. Featuring one (1) 1/8″ NPT port for connecting a pressure sensor or water methanol injection. Perfect Fit: Installs on the hot side to transfer hot air smoothly to the intercooler accelerating heat transfer to help make more power. Utilizes the factory mounting locations to provide stability for a hassle-free installation. Quality Hardware and Couplings Included: Includes high quality stainless steel spring-loaded T-Bolt clamps and heavy-duty 5-ply polyester reinforced silicone couplings pressure tested to 200 psi for long lasting strength and durability. Custom Appearance: Finished in wrinkle-black powder coating and badged with a unique aluminum laser-cut aFe Power logo welded on for a custom look.

Product Features:

• Outflows factory I/C Tubes
• TIG Welded
• 5 Ply Polyester Reinforced Silicone Couplings
• 1/8 in. NPT Ports For Auxiliary Sensors

New Platinum Pro Turbocharger Intercooler/Charge Air Cooler, Up To Production Date 3/1, All Aluminum OE Style

Product Features:

• Up To Production Date 3/1, All Aluminum OE Style, Made Of Aluminum
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

The Bladerunner charge pipes produce 20 hp and 63 lbs./ft/ torque and outflow the factory tubes by 45 percent. With the increased flow of this Charge Pipe it will reduce you exhaust gas temperatures by 100 deg..

Product Features:

• 3 in. Stainless Steel
• 100% MIG-Welded
• Welded-On aFe Power Plate
• All Hardware Included

The Bladerunner charge pipes produce 20 hp and 63 lbs./ft/ torque and outflow the factory tubes by 45 percent. With the increased flow of this Charge Pipe it will reduce you exhaust gas temperatures by 100 deg..

Product Features:

• Reduces Restriction
• Improves MPG
• Lower EGTs
• 75% cfm Flow Gain

This BladeRunner Charge Pipe kit delivers more flow and is more robust to handle higher horsepower and boost than the plastic factory Charge Pipe on the 2017-18 GM L5P diesel. TIG-welded and designed from aircraft-grade, mandrel bent aluminum tubing, the BladeRunner I/C tube features factory mounting locations, quality hardware and 5-ply silicone couplings for a secure, hassle free installation. Flow and Performance: This cold side tube is constructed of 3-1/2″ mandrel bent, powder coated aluminum tubing for maximum flow and performance. The smooth transition bends decrease turbulence and minimize pressure loss, increasing horsepower, torque and lowering EGT’s. Featuring one (1) 1/8″ NPT port for connecting a pressure sensor or water methanol injection and maintains the factory air temp sensor. Perfect Fit: Installs on the cold side to transfer cooled air smoothly to the engine for better performance. Utilizes the factory mounting locations to provide stability for a hassle-free installation. This kit also includes a factory-style quick connect adapter made from 6061-T6 billet aluminum with an O-ring seal for a quick and simple install. Quality Hardware and Couplings Included: Includes high quality stainless steel spring-loaded T-Bolt clamps and heavy-duty 5-ply polyester reinforced silicone couplings pressure tested to 200 psi for long lasting strength and durability. Custom Appearance: Finished in wrinkle-black powder coating and badged with a unique aluminum laser-cut aFe Power logo welded on for a custom look.

Product Features:

• Outflows factory I/C Tubes
• TIG Welded
• 5 Ply Polyester Reinforced Silicone Couplings
• 1/8 in. NPT Ports For Auxiliary Sensors

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.

Product Features:

• High Quality Polyester 5 ply Silicone Coupling
• Hassle Free Installation

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.

Product Features:

• Hassle-Free Installation
• AFE Replacement Couplings and Clamps
• Heavy Duty High Temp 5 Ply Polyester

Intercooler

BladeRunner charge tubes are designed to replace the factory intercooler tubes with a larger diameter and smoother flow path to reduce resistance and improve airflow. In addition, these tube upgrades incorporate NPT fittings for sensors and auxiliary input options.

Product Features:

• Retains Factory Couplings And Clamps
• Powder Coated
• Hassle Free Installation
• Works w/Stock Intercooler

New Platinum Pro Charge Air Cooler/Intercooler, 1.4 Liter L4 Turbo

Product Features:

• 1.4 Liter L4 Turbo, Made Of Aluminum
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Product Features:

• High-quality silicone cover provides extreme temperature resistance in high-temperature under-hood conditions
• Increased durability due to multiple layers of reinforcement, resulting in longer service life
• Specially formulated oil-resistant Fluorelastomer liner prevents damage
• T-bolt clamps with stainless steel band and bridge both resist corrosion and provide higher torque for optimal sealing

The Bladerunner charge pipe represents the next generation of Diesel performance products. This Charge Pipe produced 16hp and 49lbs. x ft. of torque on the dyno while out flowing the factory Charge Pipe by 67-percent. Not only will you get increased performance but you will also see lower EGTs and increased MPG. Talk about bang for the buck! This Charge Pipe is constructed of 3″ mandrel bent stainless steel for smooth air flow transition and increased power and comes complete with 5-ply heavy duty couplings and constant tension T-bolt clamps for a tight and secure installation. Note: This kit comes with a bracket to relocate a brake line.

Product Features:

• 3 in. Stainless Steel
• 100% MIG-Welded
• Welded-On aFe Power Plate
• All Hardware Included

The Bladerunner charge pipes produce 20 hp and 63 lbs./ft/ torque and outflow the factory tubes by 45 percent. With the increased flow of this Charge Pipe it will reduce you exhaust gas temperatures by 100 deg..

Product Features:

• Stainless Steel
• 100% MIG-Welded
• All Hardware Included
• Hassle Free Installation

This intercooler is a direct replacement for an original equipment intercooler that has failed from oil contamination or leaks. This part has undergone dimensional, corrosion and flow testing to ensure proper fit and performance.

Product Features:

• Ideal replacement – this intercooler matches the fit, function and performance of the original equipment intercooler
• Durable construction – this intercooler is made from corrosion-resistant aluminum
• Cost-effective solution – offers original equipment quality at competitive price
• Quality tested – this part has undergone dimensional, corrosion and flow testing to ensure proper fit and performance