Chevrolet Impala Performance Exhaust System Kits

Give your Chevrolet Silverado or GMC Sierra 1500’s exhaust system an upgrade with a DynoMax Super Turbo dual 3-in./2.5-in. cat-back exhaust system. Features a DynoMax Super Turbo muffler that channels exhaust flow, reduces turbulence and absorbs unwanted interior resonance for a mellow tone.

Enhance the power, the sound and the look of your 2010-2015 Camaro 3.6L with this American Thunder axle-back exhaust system. Features include all mandrel-bent 2.50-inch stainless steel tubing, a pair of Super 44 Series performance mufflers for a deep powerful sound and uses the factory hanger locations for a quick and easy installation. The system is finished off with a pair of highly polished large 4.00-inch stainless steel tips embossed with the Flowmaster logo, and has a deep aggressive exterior tone with a moderate interior sound level. Includes easy to follow instructions and all necessary hardware for an easy at home installation. Note: Requires cutting of the factory system. Does Not fit Convertibles.

This Flowmaster Force II cat-back exhaust system is custom designed for 1996-1999 Chevrolet Tahoe/GMC Yukon with 5.7L engine and is perfect for the person looking for a mild to moderate sound level inside and outside of the truck, with all of the performance benefits that you would expect from Flowmaster. This bolt-on emissions-legal system features a flanged inlet with dual pipes flowing into a Scavenger Series Y-pipe for maximum scavenging and torque gains as it transitions into the large 3.00-inch mandrel-bent aluminized steel inlet pipe flowing into a 50 Series Big Block muffler for a deep mellow tone. The single 3.00-inch aluminized steel mandrel-bent tailpipe is finished off with a turndown style tip that exits behind the right rear wheel and uses the factory hanger locations. The exhaust system is covered by our 3-year Limited Warranty and includes all necessary parts and hardware for a quick and easy installation you can do at home. Notes: Fits 2/4 wheel drive models with 4 doors only.

This mandrel-bent Crossmember-Back exhaust system is custom designed for most 1964-1972 GM A-body cars and is perfect for the person looking for true dual exhaust system. This system comes complete minus the mufflers and allows you to choose the sound level of the Flowmaster performance mufflers you desire for your vehicle. System features include all mandrel-bent 2.50-inch aluminized steel tubing, an H-pipe to equalize the exhaust gas pressures and sound for maximum performance and maximum clearance and includes two styles of tailpipe exits. Designed for an easy fit, these systems include all necessary parts, hardware, and instructions for an easy installation. Covered by our 3-year Limited Warranty. Notes: Requires 2.50-inch Offset Inlet/Opposite side Offset Outlet such as part# 942548 (Super 44 Series) or 52558 (50 Series) mufflers.

This Flowmaster American Thunder cat-back exhaust system is custom designed for 1992-1995 Chevrolet Blazer and GMC Jimmy with 5.7L engine and is perfect for the person looking for a mild to moderate sound level inside and moderate tone outside, with all of the performance benefits that you would expect from Flowmaster. This bolt-on emissions-legal system features a flanged 3.00-inch mandrel-bent aluminized steel inlet pipe flowing into a Super 50 Series muffler for a deep powerful tone. The single 3.00-inch aluminized steel mandrel-bent tailpipe is finished off with an angle cut turn down style tip exiting behind the right rear wheel and uses the factory hanger locations for an easy installation. The exhaust system is covered by our 3-year Limited Warranty and includes all necessary parts and hardware for a quick and easy installation you can do at home.

Super Competition Cat-Back System Natural Finish Mufflers with Aluminized Pipes for 1998-2002 Camaro/Firebird

The MagnaFlow Chevrolet Impala Street Series Cat-Back Performance Exhaust System brings out the personality of your 5.3L Chevrolet Impala with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 3 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Chevrolet Impala exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Chevrolet Impala’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16707 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16707 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

The MagnaFlow Street Series Crossmember-Back Performance Exhaust System 15895 brings enhanced engine sound and dyno-proven performance to your muscle car with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features a crossmember-back layout designed to replace your exhaust system from the crossmember on back. With its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit that you can enhance with tips of your choosing, your muscle car will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15895 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited lifetime construction warranty.

The MagnaFlow Street Series Cat-Back Performance Exhaust System 16741 brings out the personality of your Truck with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Clamp-On Single Wall Angle Cut Rolled Edge tips, this Truck exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Truck’s to shame. With this system your vehicle will be producing Aggressive exterior and Moderate interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16741 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16741 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

For the person who wants the look of a traditional dual exhaust system with all the benefits that a Flowmaster Cat-back exhaust system provides. The American Thunder exhaust system is constructed from mandrel-bent 2.50-inch aluminized steel flowing into a specially designed Super 40 Series muffler for a moderately aggressive exterior tone and a moderate interior tone. The system finishes with dual 2.50-inch tailpipes and polished 3.00-inch stainless steel tips, and your choice of tailpipe exits either straight out the back for a muscular look, or exiting behind the rear wheels which is ideal for towing. The system uses the factory hanger locations for an easy installation and is covered by our 3-year Limited Warranty. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation. Comes with our 3-year Limited Warranty. For those who prefer full stainless steel construction and a Lifetime Limited Warranty, check out exhaust system part# 817473. Notes: Fits Fits 4-wheel drive only with extended cab/short bed configuration.

Upgrade your vintage muscle car’s exhaust system with a Thrush Turbo Header Back System. Featuring Thrush Turbo mufflers with reversible flow chambers, spun-locked heads and aluminized construction, it has everything needed for installation.

Customize your exhaust system with a DynoMax stainless steel tip. Made of high-grade 304 polished stainless steel, DynoMax exhaust tips are available in a variety of sizes making it easy to bolt on a custom look.

When it comes to performance exhaust systems, most people are looking for three things: Power, sound,and quality. JBA Exhaust Systems deliver the best of all three, giving it both great looks and performance.One of the first performance upgrades typical

Give your vintage vehicle’s exhaust system an upgrade with a DynoMax dual header kit. Designed to attach to OE headers, it features a special reducer that allows for a variety of mounting options.

Customize your exhaust system with a DynoMax stainless steel tip. Made of high-grade 304 polished stainless steel, DynoMax exhaust tips are available in a variety of sizes making it easy to bolt on a custom look.

Designed for manifold back applications. This system uses 2.25-inch 16-gauge aluminized tubing to reduce back-pressure and improve engine efficiency. The system is mandrel bent to eliminate any crush sections in the tubing to help maximize the exhaust flow for better performance.

Designed for Hooker Competition 2452HKR header back applications. This system uses 2.25-inch 16-gauge aluminized tubing to reduce back-pressure and improve engine efficiency. The system is mandrel bent to eliminate any crush sections in the tubing to help maximize the exhaust flow for better performance.

Designed for Hooker Competition header back applications. This system uses 2.25-inch 16-gauge aluminized tubing to reduce back-pressure and improve engine efficiency. The system is mandrel bent to eliminate any crush sections in the tubing to help maximize the exhaust flow for better performance.

Customize your exhaust system with a DynoMax stainless steel tip. Made of high-grade 304 polished stainless steel, DynoMax exhaust tips are available in a variety of sizes making it easy to bolt on a custom look.

When it comes to performance exhaust systems, most people are looking for three things: Power, sound,and quality. JBA Exhaust Systems deliver the best of all three, giving it both great looks and performance.One of the first performance upgrades typical

When it comes to performance exhaust systems, most people are looking for three things: Power, sound,and quality. JBA Exhaust Systems deliver the best of all three, giving it both great looks and performance.One of the first performance upgrades typical

The MagnaFlow Chevrolet Camaro Street Series Cat-Back Performance Exhaust System brings out the personality of your 6.2L Chevrolet Camaro with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 3 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Chevrolet Camaro exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Chevrolet Camaro’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15089 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15089 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

The MagnaFlow Chevrolet Camaro Race Series Axle-Back Performance Exhaust System 19266 doesn’t leave any performance on the table with a race-ready, light weight, dyno-proven design ready to help your 6.2L Chevrolet Camaro take on any pretenders, whether on the track or the street. Exhaust kit 19266 is engineered to produce our powerful, resonant signature exhaust note at Very Aggressive exterior and Aggressive interior sound levels with an axle-back layout that replaces your vehicle’s exhaust components from near the rear axle on back. Please check to ensure compliance with local noise regulations. This Chevrolet Camaro exhaust kit features fast-flowing mandrel bent 3in. diameter main piping that ends in a Quad Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips. Extensive 3D scanning during development and the use of advanced CNC precision robotic manufacturing techniques ensures that 19266’s direct-fit design fits so perfectly that you can easily install the system yourself. The durable, corrosion resistant stainless steel construction of exhaust system 19266 is backed by MagnaFlow’s limited lifetime warranty.

“Flowmaster’s American Thunder Cat-back exhaust system for the 2013-2015 Chevrolet Camaro SS (not convertibles) is perfect for the person looking for aggressive sound levels with all of the performance benefits that you would expect from Flowmaster. This bolt-on emissions-legal system for the 6.2L V8 engine features a 3.00 in. Scavenger X-pipe assembly, Outlaw Series mufflers, 3.00 in. mandrel bent 409S stainless steel tubing and 4.00 in. quad logo embossed tips. This system produces a deep aggressive interior and exterior sound and will disable the active “”dual mode”” function. The exhaust system is covered by Flowmaster’s Lifetime Limited Warranty. Designed for an easy fit, this system includes all necessary parts and hardware for installation.”

The Street Series Black Performance Exhaust system delivers dyno proven power with a comfortable interior sound and performance exterior sound. Features Black coated tips. MagnaFlow Performance Exhaust System Kit 15361 is made of durable stainless steel and built using CNC precision robotic manufacturing techniques, all backed by MagnaFlow’s limited lifetime construction warranty and 1 year finish warranty.