Chevrolet Hubs and Hub Assemblies

DRIVEWORKS Wheel Hub assemblies are designed to support the vehicle’s weight and reduce resistance so that your wheels maintain contact with the road under any condition. These wheel hub assemblies are set to the appropriate tolerances to ensure smooth rotation, maximum longevity, and wear resistance. Easy installation, comfortable handling and quiet performance are just a few of the benefits you will find with the installation of DRIVEWORKS Wheel Hub assemblies. DRIVEWORKS Wheel Hub assemblies come complete with wheel studs, hub and bearings where applicable. ABS Wheel Sensors are also provided where applicable.

Product Features:

• Constructed from quality materials for extended durability
• Integral raceway provides proper clearance between the ball and bearing riding surfaces
• Precision-matched components deliver smooth and quiet operation
• Manufactured to strict engineering quality standards
• Quality ABS leads are 100% tested to ensure longevity and performance (where applicable)
• Go through a vacuum vulcanization process to enhance the structural integrity of the seal and rubber components (where applicable)
• Brand may vary by location

Are you looking to replace your manual locking hubs? Rugged Ridge has you covered with this pair of OE replacement manual locking hubs that fit the 30-spline Dana 50 and Dana 60 front axle shafts in 76-90 1-ton Chevy trucks, 90-93 3/4 ton and 1-ton Dodge

Product Features:

• Hub Service Kit

These heavy-duty lockouts feature all steel construction, including Chrome-Moly internals, for the ultimate in durability & strength. The hubs will not disengage under high torque applications and defaults to the locked position under use. Engagement comes from just a 1/3 turn of the all-steel, low-profile bezel. The Yukon Hardcore locking hubs are not only great looking, but features a low-profile design to minimize impact with obstacles, and a proprietary coating on the locking gears for decreased friction & long life. Yukon Hardcore Locking Hubs come with a Limited Lifetime warranty against manufacturer’s defect. This locking hub set will not fit housings with Bill of Materials numbers 610033-2, 3, 5 or 6.

Product Features:

• Fits 1979-1991 GM, 1978-1997 F350 and 1979-1993 Dodge one ton fronts with Dana Spicer 60
• 35 spline
• All steel construction
• Chromoly internals for added strength
• Low profile bezel to reduce impact with obstacles
• Defaults to locked position
• 1/3 turn from disengaged to engaged

These heavy-duty lockouts feature all steel construction, including Chrome-Moly internals, for the ultimate in durability & strength. The hubs will not disengage under high torque applications and defaults to the locked position under use. Engagement comes from just a 1/3 turn of the all-steel, low-profile bezel. The Yukon Hardcore locking hubs are not only great looking, but features a low-profile design to minimize impact with obstacles, and a proprietary coating on the locking gears for decreased friction & long life. Yukon Hardcore Locking Hubs come with a Limited Lifetime warranty against manufacturer’s defect. This locking hub set will not fit housings with Bill of Materials numbers 610033-2, 3, 5 or 6.

Product Features:

• Fits 1979-1991 GM, 1978-1997 F350 and 1979-1993 Dodge one ton fronts with Dana Spicer 60
• 30 spline
• All steel construction
• Chromoly internals for added strength
• Low profile bezel to reduce impact with obstacles
• Defaults to locked position
• 1/3 turn from disengaged to engaged

These heavy-duty lockouts feature all steel construction, including Chrome-Moly internals, for the ultimate in durability & strength. The hubs will not disengage under high torque applications and defaults to the locked position under use. Engagement comes from just a 1/3 turn of the all-steel, low-profile bezel. The Yukon Hardcore locking hubs are not only great looking, but features a low-profile design to minimize impact with obstacles, and a proprietary coating on the locking gears for decreased friction & long life. Yukon Hardcore Locking Hubs come with a Limited Lifetime warranty against manufacturer’s defect.

Product Features:

• Fits 1979 and up GM Dana 44 and 1966-1977 Ford Bronco
• 19 spline
• All steel construction
• Chromoly internals for added strength
• Low profile bezel to reduce impact with obstacles
• Defaults to locked position
• 1/3 turn from disengaged to engaged

These heavy-duty lockouts feature all steel construction, including Chrome-Moly internals, for the ultimate in durability & strength. The hubs will not disengage under high torque applications and defaults to the locked position under use. Engagement comes from just a 1/3 turn of the all-steel, low-profile bezel. The Yukon Hardcore locking hubs are not only great looking, but features a low-profile design to minimize impact with obstacles, and a proprietary coating on the locking gears for decreased friction & long life. Yukon Hardcore Locking Hubs come with a Limited Lifetime warranty against manufacturer’s defect.

Product Features:

• Fits 1978 and down GM Dana 44 and 1978-1992 Ford Dana 44
• 19 spline
• All steel construction
• Chromoly internals for added strength
• Low profile bezel to reduce impact with obstacles
• Defaults to locked position
• 1/3 turn from disengaged to engaged

These heavy-duty lockouts feature all steel construction, including Chrome-Moly internals, for the ultimate in durability & strength. The hubs will not disengage under high torque applications and defaults to the locked position under use. Engagement comes from just a 1/3 turn of the all-steel, low-profile bezel. The Yukon Hardcore locking hubs are not only great looking, but features a low-profile design to minimize impact with obstacles, and a proprietary coating on the locking gears for decreased friction & long life. Yukon Hardcore Locking Hubs come with a Limited Lifetime warranty against manufacturer’s defect. This is a hub kit for one side only. This locking hub set will not fit housings with Bill of Materials numbers 610033-2, 3, 5 or 6. This is a hub kit for one side only.

Product Features:

• Fits 1979-1991 GM, 1978-1997 F350 and 1979-1993 Dodge one ton fronts with Dana Spicer 60
• 30 spline
• All steel construction
• Chromoly internals for added strength
• Low profile bezel to reduce impact with obstacles
• Defaults to locked position
• 1/3 turn from disengaged to engaged

These heavy-duty lockouts feature all steel construction, including Chrome-Moly internals, for the ultimate in durability & strength. The hubs will not disengage under high torque applications and defaults to the locked position under use. Engagement comes from just a 1/3 turn of the all-steel, low-profile bezel. The Yukon Hardcore locking hubs are not only great looking, but features a low-profile design to minimize impact with obstacles, and a proprietary coating on the locking gears for decreased friction & long life. Yukon Hardcore Locking Hubs come with a Limited Lifetime warranty against manufacturer’s defect. This is a hub kit for one side only. This locking hub set will not fit housings with Bill of Materials numbers 610033-2, 3, 5 or 6.

Product Features:

• Fits 1979-1991 GM, 1978-1997 F350 and 1979-1993 Dodge one ton fronts with Dana Spicer 60
• 35 spline
• All steel construction
• Chromoly internals for added strength
• Low profile bezel to reduce impact with obstacles
• Defaults to locked position
• 1/3 turn from disengaged to engaged