Chevrolet Header Bolts and Studs

Taylor Gaskets Vibe-Lock Bolt, 310001.

Taylor Gaskets Vibe Lock Header Bolt Kit, 310070.

This Hooker BlackHeart 304 stainless steel Cat-Back exhaust system will make your 2020-2025 C8 Corvette sound like the supercar it is. The polished high-flow straight through muffler design will not only give your car a deep aggressive rumble, but it will also reduce the weight of the exhaust system by 19 lbs. The muffler also has an internal X-Pipe design to act as a balance point between the two cylinders banks, improving performance. This helps keep the in-cab sound level very moderate at cruising speeds, allowing you to better enjoy the experience of driving the car. Also included in this system are exhaust valves and AFM/DFM actuator mounts that reuse the factory valve actuators to give you the open exhaust performance and sound when you need it. The system includes mandrel bent 3-inch tubing to maximize the exhaust flow, along with 2.5-inch tubing through the muffler and is finished off with four 4-inch double walled polished stainless steel tips that have the Hooker BlackHeart logo laser etched into them for great looks. This exhaust system includes hardware and utilizes the factory mounting points for a hassle free installation. Backed by Hooker BlackHeart’s limited lifetime warranty.

Full stainless steel exhaust system comes complete with stamped crossover for a broad torque curve, TIG welded stainless steel straight through designed absorption style mufflers, for applications over 450HP; single turn-down exit under each quarter panel for an stealthy look.

Full stainless steel exhaust system for 1970-1974 2nd Gen F-body Camaro/Firebird with LS Engine comes complete with stamped crossover for a broad torque curve, TIG welded stainless steel straight through designed absorption style mufflers, for applications over 450HP; single turn-down exit under each quarter panel for an stealthy look.

These parts were intended to work together and for compatibility with Hooker Blackheart engine mounting brackets listed for this vehicle application only. They are designed to provide the user with a means of installing the factory catalytic converters from a 1999-2006 5.3 or 6.0-liter Chevy Silverado truck (4.00-inch maximum diameter), into this vehicle application, within the stipulations/requirements published by CARB/EPA for emissions-legal engine changes. The ability of the final fabricated assembly to satisfy these requirements should be confirmed with local/state authorities prior to the installation of these components.

Hooker Blackheart now offers stainless steel versions of our popular cast iron lineup of LS swap exhaust manifolds based on the 8502HKR and family. The new stainless steel manifolds offer a number of advantages over the cast iron version, including increased durability, reduced weight, and improved corrosion resistance. The shorty tight tuck design means you can route exhaust tubing close to your frame/floor pan for maximum ground clearance. These are available in both natural cast and polished depending on the look you’re going for and all hardware is included (gaskets, bolts, and flanges).

Hooker Blackheart now offers stainless steel versions of our popular cast iron lineup of LT swap exhaust manifolds based on the BHS516 and family. The new stainless steel manifolds offer a number of advantages over the cast iron version, including increased durability, reduced weight, and improved corrosion resistance. The shorty tight tuck design means you can route exhaust tubing close to your frame/floor pan for maximum ground clearance. These are available in both natural cast and polished depending on the look you’re going for and all hardware is included (gaskets, bolts, and flanges).

Hooker Blackheart now offers stainless steel versions of our popular cast iron lineup of LS swap exhaust manifolds based on the 8502HKR and family. The new stainless steel manifolds offer a number of advantages over the cast iron version, including increased durability, reduced weight, and improved corrosion resistance. The shorty tight tuck design means you can route exhaust tubing close to your frame/floor pan for maximum ground clearance. These are available in both natural cast and polished depending on the look you’re going for and all hardware is included (gaskets, bolts, and flanges).

These Hooker BlackHeart cast iron exhaust manifolds for the popular GM LT motor has a 2.5-inch outlet and are designed to hug close to the engine block so they fit into a wide variety of replacement and engine-swap applications. Their contoured design guides the exhaust directly toward the exit port for improved flow and minimal turbulence. Cast iron construction means they will provide years of leak-free performance with less under hood noise than traditional headers and their shorty design means you can route exhaust tubing close to your frame/floor pan for maximum ground clearance. OE quality MLS flange gaskets and hardware are included to ensure excellent fitment and a leak-free installation and are available in plain as cast finish, black or silver ceramic coatings for reduced engine compartment temperatures, improved corrosion resistance and excellent styling.

The Hooker BlackHeart BHS558 is a premium set of Gen III Hemi swap exhaust manifolds designed for maximum clearance, durability, and performance in classic Mopar cars and Dodge trucks. Built from heavy-duty hi-silicon-moly ductile iron, they deliver a factory-style fit with modern high-flow capability, making them ideal for enthusiasts upgrading to a Gen III Hemi engine.

These kits were designed for compatibility with Hooker Blackheart engine mounting brackets listed for this vehicle application only. They are designed to provide the user with a means of installing the factory catalytic converters from a 1999-2006 5.3 or 6.0-liter Chevy Silverado truck (4.00-inch maximum diameter), into this vehicle application, within the stipulations/requirements published by CARB/EPA for emissions-legal engine changes. The ability of the final fabricated assembly to satisfy these requirements should be confirmed with local/state authorities prior to the installation of these components.

1967-1972 A-Body manual steering only, requires power steering or shortened steering column tube and u-joint style coupler.

These adapters are for 1963-1972 C10 trucks with an LS or LT engine. They adapt Hooker BlackHeart manifolds to any of the 2.5-inch Hooker BlackHeart exhaust systems for 1967-1972 C10 pick-up trucks. Built with light-weight 409 stainless steel and have O2 bungs on both sides for EFI convenience.

“When connecting Hooker Cast Manifolds to a 2.5″” diameter Hooker exhaust kit, an adapter pipe is required to fill that gap between the end of the manifolds and our Hooker exhaust systems.”

“Hooker Blackheart C1500/K1500 (GMT400) or “”OBS”” Truck exhaust tips are constructed of 409 Grade Stainless Steel to match the exhaust systems they were designed for (BH14345 – 2WD or BH14348 – 4WD). Choose from this stealth-exit tip kit or the rear-exit tips (BH14354) to complete the full Blackheart exhaust system that begins with our cast stainless or cast iron exhaust manifolds (8502HKR, 8503HKR, BHS516). Finish it off with our 409SS adapter kits, BH14350 or BH14351, that make it easy to incorporate a catalytic converter and already have bungs for O2 sensors and Hooker Blackheart exhaust systems. Set contains 2 tips.”