Chevrolet G10 Van Distributors

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Fel-Pro Oil Pan SnapUps 8mm bolts
• Designed to hold up the pan and gasket, for one person installation
• Engine$aver Hardware
• Unsurpassed quality you can trust
• Sold in sets of four and are reusable

One of the best, and sometimes missed tuning tricks is not to just optimize your initial timing, but to bring in timing advance more quickly than the stock distributor can allow. Bringing timing more quickly than stock can provide substantial increases in both torque and horsepower depending on your combination.This is done by changing the springs under the cap. This kit includes three sets of springs which can be used in different combinations to provide full advance sooner than stock. Use lighter springs to bring the advance more quickly, and heavier springs to bring it in more slowly. Two new weights with nylon bushings are also included as are instructions to help with installation. Springs are color code as follows: Light Springs – Black Medium Springs – Silver Heavy Springs – Gold

Product Features:

• Brings in timing more quickly than stock for more torque and horsepower
• Includes three sets of springs to allow for a wider range of custom tuning
• Instructions included to help with installation

Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

Product Features:

• Made from hi-performance 60 KV rated alkyd molding compound.
• Cap and rotor kits include nylon rotor hold-down screws.
• Flame-Thrower dust covers provide a larger air gap around the coil.

The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

• All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
• Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
• Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
• Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

Edelbrock part No. 22737 is a bronze alloy drive gear for use on ProFlo EFI & Max-Fire distributor in small-block & big-block Chevrolet engines.

Flame Thrower Street/Strip distributors have a speciallFlame-Thrower Street/Strip distributors have a specially designed HEI distributor module and coil combination which operates without misfire beyond 7500 RPM. That’s nearly 3000 RPM higher than most stock HEI Distributors. Race HEI Distributors feature an electronic HEI Distributor module and 50,000 volt coil combination that optimizes spark energy and peak current to the spark plug in the 6000 to 8500 RPM range.y designed module and coil combination which operates without misfire beyond 7500 RPM

Product Features:

• These vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency.
• Our vacuum lockout plates allow for precise pickup coil position and accurate rotor phasing.

Vacuum Advance & LockoutThese vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency. Our vacuum lockout plates allow for precise pickup coil position and accurate rotor phasing.

Product Features:

• PerTronix D9006 Flame-Thrower HEI Distributor Adjustable Vacuum Advance Canister
• These vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency.

The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

• All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
• Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
• Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
• Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

BWD SELECT designs, specifies, and manufactures replacement parts with one goal in mind-make them the very best. To maximize performance and longevity, we use the finest materials and improve on OE specifications, whenever possible.

Product Features:

• High-quality direct replacement electrical connector allows you to replace only the damaged connector instead of the entire harness for a cost-effective repair
• The terminal is manufactured with high grade materials such as copper alloy, brass, and phosphor bronze.  The housing is fabricated using polyamide resins.  All of the materials together provide the connectors with prolonged life and superior performance.
• All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
• Offering thousands of high-quality pigtails & sockets for nearly every electrical job

The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

• All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
• Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
• Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
• Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

Add sparkle to your engine with this chromed hold-down clamp. With bolt and gasket. Serrations on the bottom prevent distributor and magneto rotation for accurate timing.

Product Features:

• Rolled Edges For Strength
• Ideal For Magnetos
• Ideal For Ignition Distributor

When dressing up your engine, be sure not to miss a single detail. After installing a high-performance TSP distributor, hold it down with a color-matched billet aluminum clamp.

Product Features:

• Material: Aluminum
• Fastener Style: Stud
• Hardware: Included

Chrome Finish

Product Features:

• Edelbrock part No. 4802 hold-down distributor clamp is for 4.3L V6, small-block V8 and big-block V8 Chevys. It is constructed of die-cast zinc with a chrome finish. Kit includes stud, nut and a washer.
• Includes stud, nut, & washer

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system or operating system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.

The distributor is just one piece of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Our Chevrolet front drive distributors brought the need for a distributor plug. Both are billet aluminum and feature a slip collar to ensure correct installation depth.

Product Features:

• Use On Engines w/Wet Sump Oil System And Front Drive Dist.
• Supplied w/Bronze Gear
• Must Be Used w/An MSD Crank Trigger
• Adj. slip collar mounting flange for engines w/modified deck hts.
• O-ring seals can be installed for oil press. control (Mods only)
• Special oil tract improves lubrication to the dist./cam gear
• QPQ coated polished steel shaft; guided by sealed ball bearings
• Oversized Polished Steel Shaft w/QPQ Coating

Distributors

If you have a slightly taller block or have decked the heads, the distance between the distributor mounting pad and the cam gear-oil pump drive may be different. MSD offers these distributor with an adjustable slip collar with 1.5 In. of adjustment so you can be sure the distributor is installed correctly. The distributor shares the same?features of the standard Pro-Billet Chevrolet model including a ball bearing guide, long sintered lower bushing and an oil seal. To trigger the MSD Ignition a maintenance-free magnetic pick-up is secured in the billet base of the distributor. Just above this pick-up assembly is an adjustable mechanical advance assembly.

Product Features:

• CNC machined billet aluminum housing and billet aluminum base
• Will not accept a vacuum advance canister
• Must Be Used w/An MSD Ignition Control
• Supplied w/HEI style distributor cap/rotor (accepts Cap-A-Dapts)
• O-ring seals can be installed for oil press. control (Mods only)
• Special oil tract improves lubrication to the dist./cam gear
• Nylon pads ensure smooth operation of the advance weights
• Advance weight pins are staked and tig welded to the plate

Carquest Premium distributors are built to meet or exceed the original equipment (OE) specifications for each application. Our distributors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each distributor is supplied with the cap, rotor and any seals needed for installation. Carquest Premium distributors are 100% new and undergo extensive validation testing to ensure long-lasting ignition performance and reliability.

Product Features:

• Designed to meet or exceed OE specifications for fit, form and function
• 100% new unit with no core charges
• Precision machined shafts result in high speed accuracy and help prevent bearing failures
• Every distributor is tested to ensure reliable and long-lasting performance
• O-rings or gaskets included where applicable
• Precision Engineered ignition modules and plugs ensure proper performance plus precise connection.
• Precision machined and ground shafts assure high speed accuracy and prevent bearing failures.
• Original Equipment Equivalent high voltage ignition coils.
• 100% New Components and fasteners eliminate premature failures.

Our line of Billet Plug n¿ Play Distributors are based on a precision CNC-machined housing with an upper ball bearing to support the steel distributor shaft accurately from idle to redline rpm. These distributors feature our maintenance-free Ignitor II or III electronic ignition module to produce a strong spark and steady ignition timing.

Product Features:

• Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.
• Our Billet distributors ship with Ignitor II modules factory installed.
• Each billet distributor is hand polished and buffed to a high luster.
• Tempered distributor shaft has low torsion displacement for accurate timing and extended operational life.
• Upper ball bearing and extra long oil impregnated bronze lower bushing work together to reduce friction and provide shaft and advance mechanism stability reducing high RPM vibration.

Distributor

Marine environments place rigorous demands on every component of the ignition system. The combination of water spray, salt exposure, full throttle acceleration and harsh vibrations all take their toll. The MSD Pro-Billet distributor is the strongest and most accurate distributor you can put in your boat. The housing is CNC-machined from a billet of 6061-T6 aluminum creating a housing with no porosity. Each distributor uses MSD’s race-proven magnetic pickup to trigger the ignition control. Mounted just above the pickup is a mechanical advance assembly that is easy to adjust so you can dial-in an ignition curve to match your boat’s application (except PN 8366). For marine use, the distributor cap is bolted to the aluminum base. There are two flame arrestor holes with brass screens machined into the base of the distributor to prevent ignition of gas fumes that may build up in the engine compartment. A special Weathertight connector is supplied. Underwriter’s laboratory approved.

Product Features:

• For Use In Marine Applications w/Chevy V8 Automotive Engines
• Will not accept a vacuum advance canister
• Supplied w/Bolt Down HEI Style Distributor Cap And Rotor
• Weathertight connectors used for locked and sealed connections
• Must Be Used w/An MSD Ignition Control
• O-ring seals can be installed for oil press. control (Mods only)
• Special oil tract improves lubrication to the dist./cam gear
• Nylon pads ensure smooth operation of the advance weights

Carquest Premium distributors are built to meet or exceed the original equipment (OE) specifications for each application. Our distributors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each distributor is supplied with the cap, rotor and any seals needed for installation. Carquest Premium distributors are 100% new and undergo extensive validation testing to ensure long-lasting ignition performance and reliability.

Product Features:

• Designed to meet or exceed OE specifications for fit, form and function
• 100% new unit with no core charges
• Precision machined shafts result in high speed accuracy and help prevent bearing failures
• Every distributor is tested to ensure reliable and long-lasting performance
• O-rings or gaskets included where applicable

TSP HEI Distributor has everything you need, all under one cap. With a high-quality aluminum housing and hardened steel dual bushing construction, it is built to last. It features fully adjustable mechanical and vacuum advances, meaning precision is a breeze. It has a high-output module, high-spark 65,000 volt coil, solid brass terminals, and an easy one-wire hookup.

Product Features:

• Advance Type: Vacuum and Mechanical
• Coil Type: HEI Coil (Included)
• Terminal Style: Male
• Trigger Style: Magnetic

TSP Pro Series Ready to Run Distributor is perfect for a street performance upgrade. It features a CNC-machined billet aluminum body and hardened steel shaft, with a sealed ball bearing on top and a sintered steel bushing on the bottom. It also comes with a fully adjustable mechanical advance, vacuum advance, magnetic pickup trigger, and a high-output circuit board module with digital tach output. The dielectric cap comes with solid brass terminals and a color-matched wire retainer.

Product Features:

• Advance Type: Vacuum and Mechanical
• Terminal Style: Male
• Trigger Style: Circuit Board Module with Magnetic Pick-Up
• Gear Material: Steel