Chevrolet Express 2500 Exhaust Parts
Top Chevrolet Express 2500 Exhaust Parts Categories
We carry over 211 Exhaust Parts in inventory for the Chevrolet Express 2500. If you’re looking for aftermarket Exhaust Parts for your Chevrolet Express 2500, check out all these categories:
Essential Chevrolet Express 2500 Exhaust Parts
Dorman – Exhaust Clamp (Part No.H8020683618DOR)
from
$85.99
Exhaust Clamp
Carquest Premium – Secondary Air Injection Pipe Gasket (Part No.EVA1014)
from
$2.79
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Dorman – Exhaust Manifold Clamp Repair (Part No.917-107)
from
$51.99
This exhaust manifold to cylinder head repair clamp is designed to match the fit and function of the original clamp on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Saves time – When an exhaust manifold fastener breaks, this exhaust manifold repair clamp saves time by creating a seal without needing to extract the broken stud.
- Location-specific – engineered to fit the exhaust manifold on specified GM and Isuzu vehicles on the front right on vehicles without EGR valve, or rear left.
- Complete kit – includes clamp and fasteners for a thorough, secure repair
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Exhaust Gas Temperature Sensor (Part No.904-721)
from
$81.99
EGT sensors frequently seize in the exhaust bung, making replacement difficult and damaging the bung. This Dorman OE FIX solution directly replaces the sensor and comes with a bung repair kit just in case.
Product Features:
See More
Product Features:
- Convenient solution – this replacement EGT sensor comes with a bung repair kit in case the bung is damaged during removal
- Cost-effective fix – bung repair kit allows direct repair of damaged bung instead of replacing entire exhaust pipe
- Complete kit – comes with sensor, new bung, weld-on plate and zip tie
- Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
MagnaFlow – California Grade CARB Compliant Universal Catalytic Converter (Part No.447106)
from
$523.99
MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 447106 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Mahle – Exh. Man. to Pipe Ga (Part No.H4003205941MAH)
from
$15.82
Exh. Man. to Pipe Ga
Walker – Exhaust System Hanger Insulator (Part No.35229)
from
$7.79
Complete your exhaust repair with Walker insulators. Available in a variety of styles and sizes, they¿re designed to work with Walker aftermarket replacement parts for quick and easy installation.
Product Features:
See More
Product Features:
- OE DESIGN — Designed with OE-style features for easy installation and fit
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Tail Pipe 2.625" Inlet (OD) 2.625" Outlet (OD) (Part No.55483)
from
$75.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Dorman – Help – Exhaust Manifold Hardware Kit – M8-1.25 Stainless Steel (Part No.03413HP)
from
$28.99
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.
Product Features:
See More
Product Features:
- Upgraded hardware – this set of twelve M8-1.25 x 30mm exhaust manifold mounting bolts are 100 percent stainless steel for superior heat and corrosion resistance.
- Convenient solution – kit contains all the application-specific hardware necessary to install one exhaust manifold
- Matches fit – this hardware matches the fit and function of the factory fasteners, while offering superior durability
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
MAHLE Original – Exhaust Pipe Gasket (Part No.F31903)
from
$8.99
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.
Product Features:
See More
Product Features:
- All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
- MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
- Exhaust pipe gaskets from MAHLE Original are manufactured with the best materials to withstand high temperature applications.
- The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
Walker – Exhaust Pipe 2.625" Outlet (OD) (Part No.53622)
from
$68.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
- COMPATIBILITY — Ideal for weld or clamp installations
Mahle – Exhaust Seal Ring (Part No.H4002206261MAH)
from
$14.44
Exhaust Seal Ring
Dorman – Direct Fit Exhaust Manifold: With Heat Shield (Part No.674-218)
from
$105.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Product Features:
See More
Product Features:
- Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles.
- Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance.
- Complete repair – includes all necessary gaskets and downpipe hardware
- Trustworthy design – built by industry leader in aftermarket manifolds
Walker – Quiet-Flow SS Direct Fit Exhaust Muffler 2.75" Outlet (OD) (Part No.21482)
from
$234.99
The only broad-market muffler body with 100% stainless-steel construction, Walker Quiet-Flow SS mufflers feature precision fit, superior flow and OE-style sound. Quiet-Flow SS mufflers are available for most domestic and import vehicles.
Product Features:
See More
Product Features:
- CORROSION RESISTANT STAINLESS STEEL — The only broad-market muffler body with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
- DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
Dorman – Exhaust Bolt (Part No.H80151097742DOR)
from
$35.60
Exhaust Bolt
Felpro – EXHAUST MANIFOLD GASKET SET (Part No.MS 91587)
from
$26.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
Taylor Gaskets – Seal-4-Good Header Flange Gasket (Part No.66078)
from
$48.99
Seal-4-Good Header Flange Gasket
Flowtech – Terminator; Exhaust Tips (Part No.59905FLT)
from
$85.99Product Features:
- Show Quality Chrome Platinum
- Durable Black Finish
- Can Be Welded Or Clamped
- Complete The System
- Glass-Packed Resonators
Dorman – Help – Exhaust Stud Kit – M10-1.5 x 62mm (Part No.03133)
from
$17.29
Our exhaust manifold flange kit includes all necessary studs and nuts for a complete repair.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles.
- Ideal solution – this stud and nut are reliable replacements for original parts that are missing or have failed due to wear
- Durable construction – these parts are made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Exhaust Stud Kit 3/8-16 x 2-1/2 In. and 3/8-16 x 3-1/4 In. (Part No.03147)
from
$11.29
Our exhaust manifold flange kit includes all necessary studs and nuts for a complete repair.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles.
- Ideal solution – this stud and nut are reliable replacements for original parts that are missing or have failed due to wear
- Durable construction – these parts are made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Exhaust Manifold Bolts (Part No.03088CD)
from
$24.99
This exhaust bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust bolt matches the fit and function of the factory part on specified years, makes and models.
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Exhaust Manifold Bolts (Part No.03088)
from
$26.49
Our Exhaust Bolts are now available separately for exhaust manifold repairs. These direct replacement bolts are ideal for securing exhaust components and eliminating exhaust leaks.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust bolt matches the fit and function of the factory part on specified years, makes and models.
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Exhaust Gas Temperature Bung Repair (Part No.904-528)
from
$34.99
This exhaust gas temperature (EGT) sensor bung repair kit is designed to match the original components required to repair the sensor bung on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Cost-effective fix – this EGT sensor bung repair kit allows direct replacement of only a failed bung, rather than an entire exhaust pipe.
- Weld-on plate – bung comes with steel plate for repairing pipe if damaged during bung removal.
- Application specific – designed for a wide range of vehicle years, makes and models
- This part has undergone vehicle try-on testing for conformance to product standards and quality
Chevrolet Express 2500 Exhaust Parts Categories
Helping You Find the Right Exhaust Parts for Your Chevrolet Express 2500
You love your Express 2500. So we’ve made it easier than ever to help you find Chevrolet Express 2500 Exhaust Parts in our online catalog. Our inventory holds 211 aftermarket and OEM Exhaust Parts for your Chevrolet Express 2500, ranging from $2.79 to $1,914.99.
We offer parts from 21 brands trusted to make quality Exhaust Parts for your Chevrolet Express 2500. Before you buy, take some time to read through customer reviews. We currently have 40,803 reviews of Chevrolet Express 2500 Exhaust Parts from previous customers. Some of the top rated parts include OEM Grade Federal / EPA Compliant Universal Catalytic Converter with 4.4 stars and Exhaust Manifold Gasket Set with 4.8 stars.
Find your Express 2500 Exhaust Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Chevrolet Express 2500 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Exhaust Parts Brands for Your Chevrolet Express 2500
Our inventory holds Exhaust Parts for your Chevrolet Express 2500 from 21 trusted brands. You’ll find OEM and aftermarket parts from brands like Walker, FELPRO, and Dorman, all of which can keep that Chevrolet happy.
We have MAHLE Original parts available for your Chevrolet Express 2500 in categories like Exhaust Gaskets. Some of the top-rated MAHLE Original parts in these categories are:
Top-Rated Walker Exhaust Parts
Leading Walker Exhaust Parts
We carry Walker brand parts for your Chevrolet Express 2500 across several catalog categories, including Exhaust Hangers and Exhaust Pipes. Some of our most reviewed Walker parts include:
from
$319.99
(15)
Ultra EPA Universal Catalytic Converter 3" Inlet (ID) 3" Outlet (ID)
Catalytic Converters
FAQs for Chevrolet Express 2500 Exhaust Parts
What are the most purchased Exhaust Parts for the Chevrolet Express 2500?
Out of 211 Exhaust Parts for the Chevrolet Express 2500, the most popular in our inventory are:
What are the top-rated Chevrolet Express 2500 Exhaust Parts?
Top-rated Exhaust Parts for your Chevrolet Express 2500 based on customer reviews/ratings are:
from
$362.99
(39)
OEM Grade Federal / EPA Compliant Universal Catalytic Converter
“as described would buy again and have as a mechanic I only use this type and brand when available!
for the money they can’t be beat.”
from
$19.99
(21)
Exhaust Manifold Gasket Set
“Easy to install with slots for manifold bolts , just slide them in”
from
$15.99
(20)
Exhaust Manifold Hardware Kit
“Life saver for sure . Cheap and definitely better quality than factory in my opinion . I had 2 originals break off when attempting a manifold gasket r”
