Chevrolet Estate Camshafts
Your One-Stop Shop For Trusted Chevrolet Estate Camshafts
If you’re in search of Chevrolet Estate Camshafts aftermarket or OEM parts, consider your search over! Advance Auto Parts carries 40 Camshafts from top brands with prices ranging from $5.99 to $1,540.99.
Beyond great prices, we stock trusted brands manufacturing all types of Camshafts for your Chevrolet Estate. Of the 7 OEM and aftermarket parts brands we carry, some of the most popular are Sealed Power, Edelbrock, and Competition Cams.
And don’t forget to read customer reviews across all Camshafts categories in our catalog. Buy with confidence by leveraging past customer experiences of our aftermarket and OEM parts.
At Advance Auto Parts, we don’t think top quality Camshafts have to cost top dollar, and we prove it. Browse our top Chevrolet Estate Camshafts below, order online to ship to your home, or head into your nearest Advance Auto Parts location to get started.
Essential Chevrolet Estate Camshafts
ARP Auto Racing – Small Block/ Big Block Chevy, 5/16" – 18 Thread Size, .75" Head L, 1/2" Socket (Part No.134-1001)
from
$5.99
Install an ARP cam bolt kit and end your camshaft timing worries ARP quality delivers increased pre-load clamping force and assures positive timing gear register. Includes appropriate fasteners for your application. Increased material strength overcomes valve train harmonics and stress. Added features include oversized bolt head flange for cam button retention and reduced socket head size to facilitate easy installation and removal. Available in both High Performance and Pro Series kits.
Product Features:
See More
Product Features:
- ARP Quality Delivers Increased Pre Load Clamping Force And Assures Positive Timing Gear Register
- Quality Delivers Increased Pre-Load Clamping Force And Assures Positive Timing Gear Register
- Increased Material Strength Overcomes Valve Train Harmonics And Stress
- Oversized Bolt Head Flange For Cam Button Retention And Reduced Socket Head Size To Facilitate Easy Installation And Removal
- Set of 3
- 180,000 PSI
- .75″ Underhead Length
Melling – Stock Replacement Engine Assembly Lubricant (Part No.M-10012G)
from
$113.99
Made In USA. Melling engine assembly lube, MELL-LUBE, is formulated to be an initial lubricant on camshaft metal surfaces as well as related valve train parts. The added zinc material (1400 ppm) provides MELL-LUBE with added protection to prevent scoring and galling during initial engine start-up for both newly rebuilt and / or remanufactured engines. In addition, MELL-LUBE contains corrosion inhibitors to prevent rust and pitting of components. MELL-LUBE mixes with any engine oil and will not clog filters. Melling recommends MELL-LUBE be a part of every camshaft install.
See More
Sealed Power – Engine Camshaft Bearing Set (Part No.1749M)
from
$40.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- A-Series bi-metal aluminum alloy
- Greater seizure resistance than tri-metal material
- Dramatically reduces or eliminates bearing wear
- Made with silicon to provide greater surface hardness
- Silicon particles help polish crankshaft journal to further reduce wear during operation
- Utilizes ISO & QS certified manufacturing
Sealed Power – Engine Camshaft Bearing Set (Part No.1404M)
from
$49.49
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Steel-backed Babbitt lining material
- Used in automotive and high-performance
- Babbitt is designed to perform under extreme loads w/o damaging other engine parts
- Babbitt is more environmentally friendly than other material
- ISO & QS certified manufacturing
Sealed Power – Engine Camshaft Bearing Set (Part No.1235M)
from
$45.49
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Steel-backed Babbitt lining material
- Used in automotive and high-performance
- Babbitt is designed to perform under extreme loads w/o damaging other engine parts
- Babbitt is more environmentally friendly than other material
- ISO & QS certified manufacturing
National – Shaft Repair Sleeve (Part No.99176)
from
$46.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Competition Cams – High Energy 206/206 Hydraulic Flat Cam K-Kit (Part No.K12-205-2)
from
$1482.99
Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications.
Product Features:
See More
Product Features:
- Good blend of efficiency and performance.
- Perfect choice for performance street rebuilds.
- Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
Competition Cams – Xtreme Energy 248/254 Hydraulic Roller Cam K-Kit (Part No.K11-444-8)
from
$1471.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts.
Product Features:
See More
Product Features:
- Excellent performance in street carbureted applications.
- More vacuum allows an increase in duration for improved performance and assists power brakes.
- Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
Competition Cams – Xtreme Energy 212/218 Hydraulic Roller Cam and Lifter Kit (Part No.CL12-412-8)
from
$1097.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts.
Product Features:
See More
Product Features:
- Excellent performance in street carbureted applications.
- More vacuum allows an increase in duration for improved performance and assists power brakes.
- Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
Cloyes Performance – Engine Camshaft Thrust Button (Part No.9-202)
from
$34.99
All Components are Heat-Treated Steel. Needle Roller Bearing for a Fully Rollerized Operation. 0.640″ Long, Used with Later Sheet Metal Covers.
Product Features:
See More
Product Features:
- All Components are Heat-Treated Steel
- Needle Roller Bearing for a Fully Rollerized Operation
- Used with Later Sheet Metal Covers.
Cloyes Performance – Engine Camshaft Thrust Button (Part No.9-200)
from
$27.99
All Components are Heat-Treated Steel. Needle Roller Bearing for a Fully Rollerized Operation. 0.925″ Long, Used with Old Style 3-Spoke Sheet Metal Covers.
Product Features:
See More
Product Features:
- All components are Heat-Treated Steel
- Needle Roller Bearing
- Fully Rollerized Operation.
Cloyes Performance – Engine Camshaft Thrust Plate (Part No.9-220B)
from
$18.99
0.150″ Thick. Bronze Thrust Washer.
Product Features:
See More
Product Features:
- 0.150″ Thick
- Bronze Thrust Washer.
Cloyes Performance – Engine Camshaft Thrust Washer (Part No.9-203)
from
$13.99
Heat Treated Steel Bearing Race Material. Must Machine Cam Sprocket or Engiine Block .030″ to Ensure Proper Chain Alignment. Prevents Wear On Engine Block. Can be Used to Repair a Damaged Engine Block Thrust Surface.
Product Features:
See More
Product Features:
- Heat Treated Steel Bearing Race Material
- Must Machine Cam Sprocket or Engine Block .030″ to Ensure Proper Chain Alignment
- Prevents Wear On Engine Block
- Can be Used to Repair a Damaged Engine Block Thrust Surface.
Cloyes Performance – Engine Camshaft Bushing (Part No.P9005)
from
$24.99
Replacement Hex-A-Just Billet Steel Camshaft Dowel Eccentric Bushing; 100% USA Made; Meets or exceeds OEM performance requirements; Cloyes utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience.
Product Features:
See More
Product Features:
- Replacement Hex-A-Just Billet Steel Camshaft Dowel Eccentric Bushing
- 100% USA Made
- Meets or exceeds OEM performance requirements
- Cloyes utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience.
Sealed Power – Performance Camshaft (Part No.CS-1106R)
from
$179.99
Speed-Pro delivers the power you need and the value and quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components
Product Features:
See More
Product Features:
- Reliable performance with significant power increase vs stock
- Good low-end torque
- Recommended for tow vehicle, street rod or muscle car
- Power range: 1000-3500rpm
- Idle: stock
- Cruise: 1600-2200rpm
Edelbrock – Rollin’ Thunder Camshaft for 1965-95 B/B Chevy 396-502 (Mark IV/Gen V) (Part No.2261)
from
$528.99
Designed for 1500-6500 performance. Maximum power in high-RPM with good low-end torque. Matched to Edelbrock performer RPM intakes. 10 to 12 inches of manifold vacuum at idle. More lift and duration than most street camshafts. Dyno matched and street proven performance. Take the guesswork out of camshaft selection! Use only stock ratio Rocker Arms.
Product Features:
See More
Product Features:
- Designed for 1500 to 6500 Performance
- Maximum Power in High-RPM with Good Low-End Torque
- Matched to Edelbrock Performer RPM Intakes
- 10 to 12 in. of Manifold Vacuum at Idle
- More Lift and Duration than Most Street Camshafts
- Dyno Matched/Street Proven Performance
- Take The Guesswork Out Of Camshaft Selection
- Use Only Stock Ratio Rocker Arms
Competition Cams – High Energy/Marine 212/212 Hydraulic Flat Cam for Chevrolet Small Block (Part No.12-206-2)
from
$284.99
HYDRAULIC – High Energy: Vans, pickups, 4WD and towing, in 350c.i., good idle, strong mid-range torque. OR High Energy Marine: Single or dual engine with inboard/outboard drive for ski and economy.
Product Features:
See More
Product Features:
- HYDRAULIC – High Energy: Vans, pickups, 4WD and towing, in 350c.i., good idle, strong mid-range torque. OR High Energy Marine: Single or dual engine with inboard/outboard drive for ski and economy.
- 260/260 Advertised Duration, 212/212 Duration @ .050″, .440″/.440″ Lift, 110 Lobe Separation
- Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
Competition Cams – Xtreme Energy 236/242 Hydraulic Roller Cam for Chevrolet Small Block (Part No.12-433-8)
from
$522.99
HYDRAULIC ROLLER – Xtreme Energy Retro-Fit: Street/strip applications, 9:1+ compression, intake, headers, 2800+ stall, gears.
Product Features:
See More
Product Features:
- HYDRAULIC ROLLER – Xtreme Energy Retro-Fit: Street/strip applications, 9:1+ compression, intake, headers, 2800+ stall, gears.
- 288/294 Advertised Duration, 236/242 Duration @ .050″, .520″/.540″ Lift, 110 Lobe Separation
- Valve spring upgrade required
Competition Cams – CAMSHAFT, BBC 280 MAGNUM HYD 1 EA (Part No.11-208-3)
from
$247.99
An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts. Ideal for use with higher compression ratio engines that
Product Features:
See More
Product Features:
- Best with aftermarket torque converters and 9.5:1 compression.
- Great high RPM power.
- Easy on valve train parts.
- Can be used with mild ratio rocker arms and traditional performance valve springs.
Sealed Power – Performance Camshaft (Part No.CS-1014R)
from
$98.99
Speed-Pro delivers the power you need and the value and quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components
Product Features:
See More
Product Features:
- Reliable performance with significant power increase vs stock
- Good low-end torque
- Recommended for tow vehicle, street rod or muscle car
- Power range: 1000-3500rpm
- Idle: stock
- Cruise: 1600-2200rpm
Competition Cams – THUMPR CAMSHAFT, SBC 1 EA (Part No.12-600-4)
from
$587.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods, the Thumpr series’ early i
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
Edelbrock – Rollin’ Thunder Camshaft for 1957-86 Small-Block Chevy 283-400 V8 (Part No.2201)
from
$441.99
Product Features:
See More
- Hydraulic roller tappet style camshaft
- Reduces friction and eliminates break-in problems
- Reduces friction and eliminates break-in problems
- Permit higher valve velocities for increased performance
- Maintains good manifold vacuum and drivability
Competition Cams – CAMSHAFT, SBC 252 HIGH ENERGY HYDRAULIC 1 EA (Part No.12-205-2)
from
$518.99
Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications. Offering
Product Features:
See More
Product Features:
- Good blend of efficiency and performance.
- Perfect choice for performance street rebuilds.
- Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
Competition Cams – CAMSHAFT, SBC 249 XTREME ENERGY COMPUTER CONTROLLED HYDRAULIC 1 EA (Part No.12-249-4)
from
$276.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts, the Xtreme Energy grind family offers gains in torque and horsepower while still delivering adequate vacuum for power brakes and other vacuum dependent accessories. Xtreme Energy camshafts work great in carbureted applications, but offer the best performance with aftermarket intake manifolds, lower gear ratios, headers and free flowing exhaust.
Product Features:
See More
Product Features:
- HYDRAULIC – Xtreme Energy Computer Controlled: Great in throttle body, crossfire or carbureted engine and 305 TPI.
- 249/260 Advertised Duration, 206/212 Duration @ .050″, .434″/.444″ Lift, 112 Lobe Separation
- Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
Competition Cams – CAMSHAFT, BBC 282 XTREME ENERGY HYD ROLLER 1 EA (Part No.11-432-8)
from
$547.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts, the Xtreme Energy grind family offers gains in torque and horsepower while still delivering adequate vacuum for power brakes and other vacuum dependent accessories. Xtreme Energy camshafts work great in carbureted applications, but offer the best performance with aftermarket intake manifolds, lower gear ratios, headers and free flowing exhaust.
Product Features:
See More
Product Features:
- Excellent performance in street carbureted applications.
- More vacuum allows an increase in duration for improved performance and assists power brakes.
- Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
Chevrolet Estate Camshafts List
Camshafts Brands You Can Trust For Your Chevrolet Estate
7 trusted brands of Camshafts line our shelves, ready to help keep your Chevrolet Estate running smooth. Below are some of the most popular brands and their top Camshafts offerings:
Popular Sealed Power Camshafts
Sealed Power products for the Chevrolet Estate span several categories. Some of the highest-rated Sealed Power Camshafts that will fit your Chevrolet Estate are:
Top Chevrolet Estate Camshafts from Competition Cams
Your Chevrolet Estate will be purring again thanks to Competition Cams brand Camshafts available for online order or in-store pick up. Popular Competition Cams parts include:
Most Purchased Chevrolet Estate Camshafts from Edelbrock
When you buy the most frequently purchased Edelbrock brand Camshafts, you can be confident it will be the right part for your Chevrolet Estate. Here are the Edelbrock Camshafts Advanced Auto customers buy the most:
from
$313.99
This product is not rated
Performer-Plus Camshaft Kit for Big-Block Chevy 396-427-454 V8
Camshaft and Lifter Kits
FAQs for Chevrolet Estate Camshafts
What are the most purchased Camshafts for the Chevrolet Estate?
Out of 40 Camshafts for the Chevrolet Estate, the most popular in our inventory are:
from
$313.99
This product is not rated
Performer-Plus Camshaft Kit for Big-Block Chevy 396-427-454 V8
Camshaft and Lifter Kits
What are the top-rated Chevrolet Estate Camshafts?
Top-rated Camshafts for your Chevrolet Estate based on customer reviews/ratings are:
from
$391.99
(1)
Performer-Plus Camshaft Kit for Big-Block Chevy 396-427-454 V8
“IT WORKS VERY WELL FOR ANY SITUATION”
