Chevrolet Corvette Differential Cross Pins
Your Chevrolet Corvette will be happy to know that the search for the right Differential Cross Pins you’ve been looking for is over! Advance Auto Parts has 2 different Differential Cross Pins for your vehicle, ready for shipping or in-store pick up. The best part is, our Chevrolet Corvette Differential Cross Pins start from as little as $73.99.
When it comes to your Chevrolet Corvette, you want parts and products from only trusted brands. Here at Advance Auto Parts, we work with only top reliable Differential Cross Pins brands so you can shop with complete confidence. We’re sure you will get the right product to keep that Corvette running for a long time.
Shop online, find the best price on the right product, and have it shipped right to your door. If you prefer to shop in person for the right Differential Cross Pins for your Corvette, visit one of our local Advance Auto Parts locations and you’ll be back on the road in no time!
Compare 25 Chevrolet Differential Cross Pins
Yukon Gear – Standard Open Cross Pin (0.795" Diameter) for 8.5" GM – Some Eaton Positractions (Part No.33401)
from
$49.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Product Features:
See More
Product Features:
- Cross pin shaft for GM 8.5″ and 8.6″
- Fits standard open differentials only
- 0.795″ diameter
Yukon Gear – Replacement Cross Pin Shaft for Dana 44, Standard Open (Part No.33318)
from
$16.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Product Features:
See More
Product Features:
- Cross pin shaft for Dana Spicer 44
- Fits standard open differentials only
Yukon Gear – Dana 60 & Dana 70 Power Lok Cross Pin Shaft (Two Needed) (Part No.33315)
from
$156.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Product Features:
See More
Product Features:
- Cross pin shaft
- Fits Dana Spicer 60 and 70
- Power Lok positraction only
Yukon Gear – Cross Pin Shaft for 7.5", 7.625", and 8" GM (Part No.33404)
from
$57.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Product Features:
See More
Product Features:
- Cross pin shaft for GM 7.5″, 7.625″ and 8.0″
- Fits standard open differentials only
Yukon Gear – 8.2" GM & CI Vette Positraction Cross Pin Shaft (Part No.33411)
from
$73.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Product Features:
See More
Product Features:
- Cross pin shaft for GM 8.2″ and 1963-1979 Corvette
- Fits standard open and positraction applications
Yukon Gear – Standard Open and Positraction Cross Pin Shaft for GM 12T, 12P, and 55T (Part No.33406)
from
$23.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Product Features:
See More
Product Features:
- Cross pin shaft for GM 12 bolt passenger car and truck
- Fits standard open and positraction applications
Yukon Gear – Standard Open Cross Pin Shaft for GM 8.2" and 55P (Part No.33407)
from
$96.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Product Features:
See More
Product Features:
- Cross pin shaft
- Fits GM 8.2″ and 1955-1964 passenger car
Yukon Gear – Chrome Moly Cross Pin Shaft for Mini-Spool for 8.2" GM (Part No.32237)
from
$93.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much more. For all your differential small parts needs, look no further than Yukon.
Product Features:
See More
Product Features:
- Hardened cross pin shaft
- Fits GM 8.2″
Yukon Gear – Standard Open Cross Pin Shaft for Four Pinion Design for GM 10.5" 14 Bolt Truck (Part No.33405)
from
$89.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Product Features:
See More
Product Features:
- Cross pin shaft
- Fits GM 10.5″ 14 bolt truck
Yukon Gear – Notched Cross Pin Shaft for 7.5" GM (Part No.33435)
from
$84.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Product Features:
See More
Product Features:
- Cross pin shaft
- Fits GM 7.5″
- Notched
- Not compatible with Spartan Lockers or Lock Rights
Yukon Gear – Dana 70 & Dana 80 Standard Open Cross Pin Shaft (Part No.33324)
from
$69.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Product Features:
See More
Product Features:
- Cross pin shaft
- Fits Dana Spicer 70 and 80
Yukon Gear – Chrome Moly Cross Pin Shaft for Mini-Spool for GM 12 Bolt Car and Truck (Part No.32236)
from
$61.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Product Features:
See More
Product Features:
- Hardened cross pin shaft
- Fits GM 12 bolt passenger car and truck
Yukon Gear – Chrome Moly Cross Pin Shaft for Mini-Spool for 8.5" GM (Part No.32238)
from
$61.99
Yukon Gear & Axle manufactures a full line of top-quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers, and other general maintenance items. You can count on Yukon to fulfill all your differential small parts needs.
Product Features:
See More
Product Features:
- Cross pin shaft
- Fits GM 8.5″
- Chromoly steel for added strength
Yukon Gear – Cross Pin Shaft for 7.2" GM (Part No.33403)
from
$53.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Product Features:
See More
Product Features:
- Cross pin shaft
- Fits GM 7.2″ IFS
USA Standard Gear – Differential Cross Pin (Part No.17019)
from
$52.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear. .
Product Features:
See More
Product Features:
- USA Standard Gear heavy-duty cross pin shaft
- Fits Dana Spicer 60
- Works with Spartan Locker or standard open spider gears
Yukon Gear – Notched Cross Pin Shaft for 12P and 12T GM (Part No.33429)
from
$51.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Product Features:
See More
Product Features:
- Cross pin shaft
- Fits GM 12 bolt passenger car and truck
- Notched
- Not compatible with Spartan Lockers or Lock Rights
USA Standard Gear – Differential Cross Pin (Part No.17024)
from
$49.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.
Product Features:
See More
Product Features:
- USA Standard Gear heavy-duty cross pin shaft
- Fits GM 8.5″ and 8.6″
- Works with Spartan Locker or standard open spider gears
USA Standard Gear – Differential Cross Pin (Part No.17023)
from
$49.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Axle bearing with inner and outer seals (one side) for 8.75″ Chrysler. This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- USA Standard Gear heavy-duty cross pin shaft
- Fits GM 12 bolt car and truck and 9.5″ Toyota Landcruiser
- Works with Spartan Locker or standard open spider gears
USA Standard Gear – Differential Cross Pin (Part No.17017)
from
$46.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush. Side shims included.
Product Features:
See More
Product Features:
- USA Standard Gear heavy-duty cross pin shaft
- Fits Dana Spicer 44
- Works with Spartan Locker or standard open spider gears
Yukon Gear – 11.5" GM Standard Open Cross Pin Shaft (Part No.33409)
from
$46.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Product Features:
See More
Product Features:
- Cross pin shaft
- Fits GM 11.5″
Yukon Gear – Standard Open and Gov-Loc Cross Pin for 9.5" GM (Part No.33402)
from
$32.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Product Features:
See More
Product Features:
- Cross pin shaft
- Fits GM 9.5″
Yukon Gear – Cross Pin Shaft for GM 9.5", Fits Standard & Dura Grip or Eaton Posi Carrier (Part No.33205)
from
$32.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Product Features:
See More
Product Features:
- Cross pin shaft
- Fits GM 9.5″
- Dura Grip positraction
Yukon Gear – Cross Pin Shaft for GM 8.2" Posi Case – Will Fit Dura Grip or Eaton Posi (Part No.33204)
from
$30.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Product Features:
See More
Product Features:
- Cross pin shaft
- Fits GM 8.2″
- Dura Grip positraction
Yukon Gear – Replacement Cross Pin Shaft for Dana 60, Fits Standard Open and Trac Loc Posi (Part No.33314)
from
$26.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Product Features:
See More
Product Features:
- Cross pin shaft
- Fits Dana Spicer 60
Yukon Gear – Replacement Floater Roll Pin for Dana 44 & 8.75" Chrysler Power Lok (Part No.33326)
from
$5.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Product Features:
See More
Product Features:
- Floater roll pin
- Fits Dana Spicer 44 and Chrysler 8.75″
- Power Lok positraction only
FAQs for Chevrolet Corvette Differential Cross Pins
What are the most popular Differential Cross Pins for the Chevrolet Corvette?
With 1 brands you can trust, our most popular Differential Cross Pins for the Chevrolet Corvette are:
from
$73.99
This product is not rated
8.2" GM & CI Vette Positraction Cross Pin Shaft
Differential Cross Pins
from
$96.99
This product is not rated
Standard Open Cross Pin Shaft for GM 8.2" and 55P
Differential Cross Pins
Find Your Chevrolet Corvette Differential Cross Pins by Year
People also search Advance Auto for these popular years of Chevrolet Corvette parts:
