Chevrolet Colorado Jacks, Garage and Equipment Products

Made of a resilient poly material, the Dee Zee Poly Crossover Tool Box combines the functionality of a crossover tool box with the benefits of hardened poly plastic. This tough box can handle all the abuse you can throw at it, without sagging or denting. The center cross support ties the rear and the front together for additional support. The box has a double-wall lid for rigidity and features a molded brite-tread pattern and textured plastic. The overlapping flap on the lid deflects water from entering the box, where the next line of defense awaits with a foam gasket. You can trust your tools, camping gear or even your golf clubs will benefit from these features. The narrow design avoids interference with truck bed wheel wells and this box can be shipped via ground transportation without any large package surcharges Going hunting or camping this weekend and need something overnighted to your doorstep? Boom Available in two lengths to fit midsize trucks (63 Inch) and full-size trucks (70 Inch), this box has a discrete look with its low-profile lid that only sits inches above the bed rail and matches spray in bed liners.

Product Features:

• Rigid Poly Plastic Frame Resists Warping. No Sagging Or Denting
• Overlapping Lid And Foam Gasket Helps Make Box Weather Resistant
• Double-Wall Lid Features Molded Brite-Tread Pattern
• Metal Striker Plate In Lid Features Full-Length Locking Rod For Tight Close
• Ships To Your Doorstep Without Large Package Surcharges
• Made In USA

The bigger the project the more tools you need to bring along for the job. You need a capable toolbox to keep your tools secure and protected for the ride. The Dee Zee Red Label Single Lid Crossover ToolBox with its heavy-duty Brite-Tread aluminum construction is the right toolbox for the task. Just because mother nature is not cooperating, does not mean you get the day off. You still have to pack your truck, load your tools, and head to the job site. Just another day in the office. it is days like this you will appreciate the weather resistant features of the Dee Zee Red Label Single Lid Crossover ToolBox. Built tough to endure a lifetime of abuse. When you work like we do, it goes without saying you are going to have to get your tools out of the box quite a bit. You want an easy operating and lasting lid construction that will stand up to years of continued use. The Dee Zee Red Label Single Lid Crossover ToolBox features a Crown style lid with a full pan double-V stiffener for superior rigidity. No wobbly lids here folks. You also get Lockable stainless-steel paddle or pull handles, dampened gas shocks, and adjustable strikers to ensure opening and closing the box remains smooth and effortless.

Product Features:

• Paddle Handles With Guide Plate Lockable, Stainless Steel Handles
• Lockable Stainless Steel Paddle Handle Latch
• Self adjusting Strikers Closes Tightly Every Time
• Removable Plastic Tool Tray Keep Smaller Items Organized
• Crowned Lid With Full Length Hidden Hinge
• Adjustable Lid Strikers For Secure Closing
• Double V-Pan Lid Stiffener Creates Strength And Rigidity
• Front, Back And Bottom Are Bent From A Single Piece Of Aluminum

You need your truck tool box to haul tools and supplies. You also need to take advantage of the full length of your truck bed to haul cargo, so a regular truck tool box just wont do. When space truck bed space comes at a premium the Dee Zee Wheel Well Box has the answer. Our Wheel Well Box takes advantage of the wasted space in your truck bed behind the wheel well. Constructed of strong Brite-Tread aluminum with a raw aluminum finish, our Wheel Well Box features the same rugged feel as our larger truck boxes- in a smaller tucked away version that leaves your bed open for hauling cargo. Lockable lift-up lid allows easy access without having to lower your tailgate. Fits 6 ft and 8 ft truck beds and is available for both driver and passenger side applications.

Product Features:

• Constructed Of Strong Brite-Tread Aluminum
• Lockable Lift Up Lid
• Sturdy Piano Hinge Lid
• Made In USA

Dee Zee Red Label Double Lid (Gull Wing) Crossover Boxes are made from Non-Rusting .056 Brite-Tread Aluminum with internal bends for superior rigidity throughout. A closed cell foam gasket defends the inside of the box against outside elements while a crown style lid and double v-pan lid stiffener create strength and rigidity throughout. When you open your toolbox a lot, you want a lid that can handle the abuse. that is why we equip our lids with dampened gas shocks for even opening and self-adjusted strikers to ensure silky smooth closing. A hidden full-length hinge keeps the lid movement feeling solid.

Product Features:

• Constructed Of Non-Rusting Brite-Tread Aluminum
• Front, Back, And Bottom All One Piece For Increased Body Strength
• Self Adjusting Strikers Closes Tightly Every Time
• Closed Cell Foam Gasket Helps Resist The Elements From Getting Inside The Box
• Dampened Gas Shocks Open At A Steady, Controlled Rate And Removable Plastic Tool Tray To Keep Smaller Items Organized
• Crowned Lid With Full Length Hidden Hinge
• Adjustable Lid Strikers For Secure Closing
• Double V-Pan Lid Stiffener Creates Strength And Rigidity
• Front, Back And Bottom Are Bent From A Single Piece Of Aluminum

The bigger the project the more tools you need to bring along for the job. You need a capable ToolBox to keep your tools secure and protected for the ride. The Dee Zee Red Label Single Lid Crossover ToolBox with its heavy-duty Brite-Tread aluminum construction is the right ToolBox for the task. Just because mother nature is not cooperating, does not mean you get the day off. You still have to pack your truck, load your tools, and head to the job site. Just another day in the office. it is days like this you will appreciate the weather resistant features of the Dee Zee Red Label Single Lid Crossover ToolBox. Built tough to endure a lifetime of abuse. When you work like we do, it goes without saying you are going to have to get your tools out of the box quite a bit. You want an easy operating and lasting lid construction that will stand up to years of continued use. The Dee Zee Red Label Single Lid Crossover ToolBox features a Crown style lid with a full pan double-V stiffener for superior rigidity. No wobbly lids here folks. You also get Lockable stainless-steel paddle or pull handles, dampened gas shocks, and adjustable strikers to ensure opening and closing the box remains smooth and effortless.

Product Features:

• Self Adjusting Striker Close Securely No Matter How Hard You Push The Lid Down
• Full Pan Support Double V Stiffener Design Reinforces The Lid For Superior Rigidity
• Dampened Gas Shocks Open At A Steady, Controlled Rate
• Closed Cell Foam Gasket Helps Resist The Elements From Getting Inside The Box
• Hidden Hinge Runs The Full Length Of The Box For Maximum Strength
• Heavy duty Aluminum Built From non Rusting Brite Tread Aluminum. 3 Piece Body Front, Back And Bottom, All One Piece With Welded Ends For Increased Body Strength
• Paddle Handles With Guide Plate Lockable Handles Are Made From Stainless Steel. Removable Plastic Tool Tray Perfect For Keeping Smaller Items Organized
• Double V-Pan Lid Stiffener Creates Strength And Rigidity
• Front, Back And Bottom Are Bent From A Single Piece Of Aluminum

This push nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this push nut matches the fit and function of the factory part on specified years, makes and models
• Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

The MotoRad MT-300 cooling system pressure tester is the professionals’ choice when it comes to testing vehicle cooling systems and coolant caps. This tester ensures an automotive cooling system is operating at the correct pressure for optimal performance. Made from high quality materials to ensure life-long durability. Designed to not only test the system, but also coolant caps. Over time, coolant cap seals, springs and valves can wear out causing a loss in system pressure. The MT300 provides quick diagnoses of cooling system issues.

Product Features:

• Includes the most common radiator and cap adapters
• More adapter kits available. See below for info
• As a safety feature there is a pressure release bar that when turned, it will release the pressure in the radiator neck or the Radiator cap for easy release
• Professional quality

Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive cooling systems.

Product Features:

• Machined metal construction
• Works with MT-300 pressure tester
• Tests cooling systems
• Professional quality

X/P bolt EXTRACTOR kit. No Return.

Product Features:

• Cross pin bolt extractor kit
• Easily removes a broken cross pin bolt from a carrier case