Name: Remanufactured Transmission Electro-Hydraulic Control Module
Brand: Dorman
SKU: 609-003
Price: 914.99 USD

from

$914.99

This Dorman OE FIX remanufactured transmission electro-hydraulic control module (TEHCM) provides the same function and performance as the stock component, and features upgraded plastic to increase durability against heat and debris.

Product Features:

Aftermarket exclusive – this uniquely remanufactured TEHCM features upgraded PEEK plastic to resist heat and debris and extend its lifespan
Cost-effective fix – module is equally compatible as original but far less expensive than replacement from dealership
Quality assured – this part underwent vehicle simulator testing, and includes new gaskets, grommets and seals
Requires programming – after installation, module must be programmed with original manufacturer software, such as through a Remote Assist Programming (RAP) Kit
Cost-effective fix – module is equally compatible as original but far less expensive than replacement from dealership

from

$13.79

AT CLUTCH PLATE

from

$32.99

Detent cables connect the throttle mechanism to the transmission. Old cables can bind, break, or just become sluggish. The best repair is to replace the old cable with a new one. ATP Detent cables are designed to fit and function just like the original part to ensure durability and long life.

Product Features:

Includes brackets, grommets, etc to match original
Helps transmission determine ideal downshift
Improves vehicle performance

from

$56.99

Shift Solenoid

from

$127.99

ATHARNESS VSS REPR

from

$12.79

AT FRT PUMP BUSHING

from

$9.59

AT OIL PUMP ORING

from

$49.99

B&M’s vacuum modulator is fully adjustable, this allows you to tailor your shift points to within a range of 2-4 mph. Comes preadjusted for normal shift points. For TH350 and TH400.

Product Features:

Fully Adjustable
Allows You To Tailor Shift Points
Comes Supplied Pre-Adjusted

from

$7.49

This transfer case vent is designed to match the fit and function of the original vent on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this transfer case vent is designed to match the fit and function of the original vent on specified vehicles
Restores functionality – reliable replacement for an original vent that has failed due to blockage or fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$29.99

AUTO TRANS BAND

from

$68.99

The Shift Interlock Solenoid is a safety feature which prevents a gear shift change in an automatic transmission without first stepping on the brake pedal. The shift interlock solenoid meets all original equipment operating characteristics and mounting requirements.

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$34.49

Includes dipstick with chromed steel handle and chromed steel dipstick tube with mounting tab. 27 inch long.

Product Features:

Fits GM Th350 – Chevy Specific. Modify For Others
27 In Length
Chrome Plated Steel

from

$95.99

Billet aluminum handle with flexible braded steel tube mounts to the firewall. 29-3/4 inch long.

Product Features:

Braided Stainless Steel
Firewall Mounting
Includes Oil Fill Tube

from

$142.99

Replacement aluminum cover for your B&M Pro Stick.

Product Features:

Pro Stick; Brushed Aluminum Cover
Aluminum Cover
Replacement Part
Sold individually
B&M quality

from

$1609.99

Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road; We are committed to remanufacturing transmissions to the same standards and methodologies used for OEM transmissions; Each Moveras transmission is produced in a World Class manufacturing facility; Our entire process has been developed from scratch, utilizing LEAN manufacturing principles; Our transmissions are produced in a Clean Room environment; Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

Product Features:

OEM-Level Quality: Each transmission is remanufactured to meet or exceed original manufacturer specifications for seamless compatibility and superior performance
Advanced Remanufacturing Process: Each transmission is completely disassembled, and critical components are replaced or upgraded to ensure long-lasting performance
High-Quality Torque Converter: A fully remanufactured torque converter is included, tested for leaks, lock-up functionality, and balance to enhance durability and smooth operation
Precision Engineering: Each valve body is remanufactured to OEM specifications, ensuring proper hydraulic flow and consistent shift performance
Dyno Testing: All Moveras transmissions are dyno-tested under real-world driving conditions to ensure reliable, consistent performance before leaving the factory
Nationwide Limited Warranty: Every transmission comes with a comprehensive Limited Warranty, giving you confidence and peace of mind, no matter where you are on the road

from

$2712.99

All transmissions are completely disassembled and cleaned. All cases are media-blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as necessary. All friction components are replaced with upgraded heavy-duty parts. Drum assemblies are air-checked and side play is measured to ensure proper clearance. All seals, O-rings, and gaskets are replaced. All solenoids are tested and replaced if they do not pass duty-cycle specifications. Internal wiring harnesses are inspected and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valves and valve bores are inspected, and bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing.

Product Features:

Each transmission undergoes rigorous dyno testing to verify precise hydraulic pressures, smooth shifting, torque converter function, and park lock operation-guaranteeing reliable, trouble-free driving.
Every transmission is fully disassembled, cleaned, and rebuilt using 100% upgraded heavy-duty seals, friction components, solenoids, and torque converter parts to ensure maximum durability and performance.
Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, oft.rings and gaskets are replaced.
100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear.
Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and oft.rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno

from

$33.99

Cable Bracket, GM (Bandit style shifters only) APPLICATION: For TH-400, 350, 250, 200, 700R4, 200-4R with 80797, 80798 or 81050 shifter.

Product Features:

Shifter Service Parts
Steel
Natural Finish
Sold individually
Replacement for Bandit shifters

from

$55.99

Cable Bracket – Powerglide (Bandit style shifters only) APPLICATION: For Powerglide with Pro Bandit (Composite X and Magnum Grip) and rear entry cable.

Product Features:

Fully Polished/Bright Anodized
Narrow Design-w/No Knobs
Lightweight Mechanism
Reverse Exit Cable Design
Neutral Safety Switch Built-In
CNC Machined-6061-T6 Aluminum
Mounts Through Bottom Of Shifter
Flush Countersink Hardware Wont Rub Body Panels

from

$4.29

AT SOLENOID SEAL

from

$27.99

Made from Hyper-Flex polyurethane.

Product Features:

Made from HYPER-Flex Polyurethane

from

$85.99

New Goodmark Transmission Crossmember, For Models With TH400 Automatic Transmission

Product Features:

For Models With TH400 Automatic Transmission
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$427.99

Product Features:

CAD designed for optimum fitment, strength and ease of installation
Provides for installation of a 4th-gen T-56 or aftermarket T56 Magnum transmission in behind an LS engine in any 1993-2002 GM F-body vehicle
Transmission installation coverage can be expanded to include 4L60-4L70, TH400, 2004R or 4L80/4L85 transmissions through the use of available Hooker adapter brackets.
Optional Hooker adjustable bolt-on torque arm bracket available to divorce stock torque arm from the stock transmission case mounting
Attractive Semi-gloss black powder coat finish

from

$99.99

When swapping the TH400 transmission into any vehicle, this kit makes installation of the transmission’s kickdown feature a snap. This switch mounts to either a TH700R4, TH200, TH200-R4 or TH350 throttle cable bracket.

Product Features:

Allows High Speed Cruise
Cruise In Overdrive
Prevents Part Throttle Kickdown
Quick Installation

from

$70.99

AT CONTR SOLENOID

from

$41.99

An automatic transmission is a hydraulic multi-speed device that does not require any input from the vehicle operator other than selecting vehicle direction. Hydraulic pressure is controlled by a series of electronic shift solenoids that are commanded by the transmission control module. Planetary gear sets and hydraulically controlled shift plates and brake bands apply power to the main shaft in the transmission and out to the vehicles drive wheels.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Precision-wound coated copper windings increase product durability and life cycle.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.