Chevrolet C30 Radiator

Radiator for a Chevrolet C30

Use the fitment form at the top of the page to select your exact year and engine type for your Chevrolet C30.

• 

  Carquest Premium - Radiator (Part No. 433709)

  Description

  All radiators are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensure optimal cooling.
  
  Product Features:

  • CARQUEST offers a complete line of automotive radiators covering over 98% of all North American vehicle applications.
  • CARQUEST provides value in many different ways: increased thermal performance, enhanced design features, and design commonization for maximum availability with the minimum amount of parts.
  • CARQUEST offers certified radiators that meets or exceeds the manufacturer's specifications that are ready to install out of the box.
  • Engineering and manufactured under ISO TS16949 quality system, every radiator is 100% leak tested.

  4.5

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  4.5

  4.5

  • 5

    5

    2021-05-08

    5

    5

    i would buy this product again

    i would buy this product again

    Submitted 2021-05-08

    By alan

    From Undisclosed

    it fits

    Bottom Line NULL

    it fits

    By alan from Undisclosed

    BOTTOM LINE NULL

  • 5

    5

    2018-01-26

    5

    5

    I would purchase one again.

    I would purchase one again.

    Submitted 2018-01-26

    By Jose

    From undisclosed

    Radiator was an exact match. Went in without any issues.

    Bottom Line NULL

    Radiator was an exact match. Went in without any issues.

    By Jose from undisclosed

    BOTTOM LINE NULL

  • 1

    1

    2014-12-03

    1

    1

    wrong size

    wrong size

    Submitted 2014-12-03

    By Dr. Mike

    From Gulf Breeze, FL

    The website listed this radiator as a direct fit. Upon removing my old radiator from my 1987 chevrolet truck, I discovered that my radiator was 19 inches tall, not the 17 inches that this radiator measured. Also, the mounts on top of the radiator did not match up in regards to their mounts, even if it had been the right height. If you decide to buy one of these, I highly recommend that you measure the core of your existing radiator first, and that you prepare yourself for having to modify the mounting brackets to allow this radiator to fit...... I sent it back to Advance.

    Bottom Line not recommended

    The website listed this radiator as a direct fit. Upon removing my old radiator from my 1987 chevrolet truck, I discovered that my radiator was 19 inches tall, not the 17 inches that this radiator measured. Also, the mounts on top of the radiator did not match up in regards to their mounts, even if it had been the right height. If you decide to buy one of these, I highly recommend that you measure the core of your existing radiator first, and that you prepare yourself for having to modify the mounting brackets to allow this radiator to fit...... I sent it back to Advance.

    By Dr. Mike from Gulf Breeze, FL

    BOTTOM LINE not recommended

  from $212.99

  View Product
• 

  Carquest Premium - Radiator (Part No. 433716)

  Description

  All radiators are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensure optimal cooling.
  
  Product Features:

  • CARQUEST offers a complete line of automotive radiators covering over 98% of all North American vehicle applications.
  • CARQUEST provides value in many different ways: increased thermal performance, enhanced design features, and design commonization for maximum availability with the minimum amount of parts.
  • CARQUEST offers certified radiators that meets or exceeds the manufacturer's specifications that are ready to install out of the box.
  • Engineering and manufactured under ISO TS16949 quality system, every radiator is 100% leak tested.

  4.0

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  4.0

  4.0

  • 5

    5

    2021-08-07

    5

    5

    I would buy again

    I would buy again

    Submitted 2021-08-07

    By pete

    From Undisclosed

    It's a perfect fit.... 1983 Chevy C10 w/305

    Bottom Line NULL

    It's a perfect fit.... 1983 Chevy C10 w/305

    By pete from Undisclosed

    BOTTOM LINE NULL

  • 5

    5

    2021-08-07

    5

    5

    I would buy it again

    I would buy it again

    Submitted 2021-08-07

    By Short box 1983

    From Odessa, TX

    Perfect fit.... 1983 Chevy C10 w/305

    Bottom Line recommended

    Perfect fit.... 1983 Chevy C10 w/305

    By Short box 1983 from Odessa, TX

    BOTTOM LINE recommended

  • 5

    5

    2021-04-29

    5

    5

    Radiator

    Radiator

    Submitted 2021-04-29

    By Douglas

    From Undisclosed

    Great replacement for mine which was in bad shape

    Bottom Line NULL

    Great replacement for mine which was in bad shape

    By Douglas from Undisclosed

    BOTTOM LINE NULL

  from $239.99

  View Product
• 

  Carquest Premium - Radiator (Part No. 433162)

  Description

  All radiators are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensure optimal cooling.
  
  Product Features:

  • CARQUEST offers a complete line of automotive radiators covering over 98% of all North American vehicle applications.
  • CARQUEST provides value in many different ways: increased thermal performance, enhanced design features, and design commonization for maximum availability with the minimum amount of parts.
  • CARQUEST offers certified radiators that meets or exceeds the manufacturer's specifications that are ready to install out of the box.
  • Engineering and manufactured under ISO TS16949 quality system, every radiator is 100% leak tested.

  4.0

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  4.0

  4.0

  • 5

    5

    2021-05-24

    5

    5

    I probably won't need the item again

    I probably won't need the item again

    Submitted 2021-05-24

    By Kerry

    From Undisclosed

    Great for what I needed for

    Bottom Line NULL

    Great for what I needed for

    By Kerry from Undisclosed

    BOTTOM LINE NULL

  • 5

    5

    2021-01-14

    5

    5

    Yes

    Yes

    Submitted 2021-01-14

    By Antwon

    From Undisclosed

    Fits perfect

    Bottom Line NULL

    Fits perfect

    By Antwon from Undisclosed

    BOTTOM LINE NULL

  • 5

    5

    2020-12-27

    5

    5

    Great excellent quality & price

    Great excellent quality & price

    Submitted 2020-12-27

    By Robert

    From Undisclosed

    1980 Camaro Z28 restoration. Radiator is a perfect fit, excellent quality & looks great

    Bottom Line NULL

    1980 Camaro Z28 restoration. Radiator is a perfect fit, excellent quality & looks great

    By Robert from Undisclosed

    BOTTOM LINE NULL

  from $223.99

  View Product
• 

  Carquest Premium - Radiator (Part No. 433730)

  Description

  All radiators are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensure optimal cooling.
  
  Product Features:

  • CARQUEST offers a complete line of automotive radiators covering over 98% of all North American vehicle applications.
  • CARQUEST provides value in many different ways: increased thermal performance, enhanced design features, and design commonization for maximum availability with the minimum amount of parts.
  • CARQUEST offers certified radiators that meets or exceeds the manufacturer's specifications that are ready to install out of the box.
  • Engineering and manufactured under ISO TS16949 quality system, every radiator is 100% leak tested.

  4.0

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  4.0

  4.0

  • 3

    3

    2020-12-17

    3

    3

    Had to modify to fit. Petcock plug will not unscrew.

    Had to modify to fit. Petcock plug will not unscrew.

    Submitted 2020-12-17

    By Miguel

    From Undisclosed

    Installed this radiator on a '82 C20. The radiator sits about 1.5" too high for my truck. I had to notch a bit of the aluminum on the radiator, notch the radiator brackets, and remove the urethane mounts and replace with pieces of flat rubber. I expected to make it fit. The unacceptable part is that the radiator does not come with a regular petcock. There is a brass plug installed. I bought a traditional petcock, but I could not remove the plug. It's seized in there. Whoever installed it screwed it too tight, used lock tight or messed the threads up. I did not want to risk cracking the plastic side of the radiator. So I will have to remove the lower hose in order to drain the system in the future.

    Bottom Line NULL

    Installed this radiator on a '82 C20. The radiator sits about 1.5" too high for my truck. I had to notch a bit of the aluminum on the radiator, notch the radiator brackets, and remove the urethane mounts and replace with pieces of flat rubber. I expected to make it fit. The unacceptable part is that the radiator does not come with a regular petcock. There is a brass plug installed. I bought a traditional petcock, but I could not remove the plug. It's seized in there. Whoever installed it screwed it too tight, used lock tight or messed the threads up. I did not want to risk cracking the plastic side of the radiator. So I will have to remove the lower hose in order to drain the system in the future.

    By Miguel from Undisclosed

    BOTTOM LINE NULL

  • 3

    3

    2020-12-16

    3

    3

    Works good. Needed to modify. Petcock plug won't unscrew.

    Works good. Needed to modify. Petcock plug won't unscrew.

    Submitted 2020-12-16

    By Miguel

    From Undisclosed

    Installed this radiator on a '82 C20. The radiator sits about 1.5" too high for my truck. I had to notch a bit of the aluminum on the radiator, notch the radiator brackets, and remove the urethane mounts and replace with pieces of flat rubber. I expected to make it fit. The unacceptable part is that the radiator does not come with a regular petcock. There is a brass plug installed. I bought a traditional petcock, but I could not remove the plug. It's seized in there. Whoever installed it screwed it too tight, used lock tight or messed the threads up. I did not want to risk cracking the plastic side of the radiator. So I will have to remove the lower hose in order to drain the system in the future.

    Bottom Line NULL

    Installed this radiator on a '82 C20. The radiator sits about 1.5" too high for my truck. I had to notch a bit of the aluminum on the radiator, notch the radiator brackets, and remove the urethane mounts and replace with pieces of flat rubber. I expected to make it fit. The unacceptable part is that the radiator does not come with a regular petcock. There is a brass plug installed. I bought a traditional petcock, but I could not remove the plug. It's seized in there. Whoever installed it screwed it too tight, used lock tight or messed the threads up. I did not want to risk cracking the plastic side of the radiator. So I will have to remove the lower hose in order to drain the system in the future.

    By Miguel from Undisclosed

    BOTTOM LINE NULL

  • 3

    3

    2019-12-22

    3

    3

    Works, but a pain

    Works, but a pain

    Submitted 2019-12-22

    By Ron

    From Port orange Fl

    Works, truck runs 180°, no leaks. Cools just fine, but core is way thicker than the original in my 90 suburban. The one advance sells that is of the same thickness as mine is only a one row. My original was a 3 row. A one row with my ac running in the florida summer is never going to keep my truck cool enough, so had to get this one. Heavy modifications made to upper core support mounts and the shroud to make it fit. Width and height were the same though.

    Bottom Line not recommended

    Works, truck runs 180°, no leaks. Cools just fine, but core is way thicker than the original in my 90 suburban. The one advance sells that is of the same thickness as mine is only a one row. My original was a 3 row. A one row with my ac running in the florida summer is never going to keep my truck cool enough, so had to get this one. Heavy modifications made to upper core support mounts and the shroud to make it fit. Width and height were the same though.

    By Ron from Port orange Fl

    BOTTOM LINE not recommended

  from $299.99

  View Product
• 

  Carquest Premium - Radiator (Part No. 432098)

  Description

  All radiators are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensure optimal cooling.
  
  Product Features:

  • CARQUEST offers a complete line of automotive radiators covering over 98% of all North American vehicle applications.
  • CARQUEST provides value in many different ways: increased thermal performance, enhanced design features, and design commonization for maximum availability with the minimum amount of parts.
  • CARQUEST offers certified radiators that meets or exceeds the manufacturer's specifications that are ready to install out of the box.
  • Engineering and manufactured under ISO TS16949 quality system, every radiator is 100% leak tested.

  4.0

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  4.0

  4.0

  • 4

    4

    2021-08-18

    4

    4

    Confused, can't find radiator fit my older 1984 pace arrow.

    Confused, can't find radiator fit my older 1984 pace arrow.

    Submitted 2021-08-18

    By Teresa

    From Undisclosed

    Confused, I bought this radiator because when I inputted Vin # it stated the radiator I bought was a fit. Yet radiator doesn't fit. Glad and satisfied I got a return, though, can't wait to find the correct radiator. If they had it, yes, I would buy from this place again.

    Bottom Line NULL

    Confused, I bought this radiator because when I inputted Vin # it stated the radiator I bought was a fit. Yet radiator doesn't fit. Glad and satisfied I got a return, though, can't wait to find the correct radiator. If they had it, yes, I would buy from this place again.

    By Teresa from Undisclosed

    BOTTOM LINE NULL

  • 2

    2

    2013-08-10

    2

    2

    Not the Same as Pictured

    Not the Same as Pictured

    Submitted 2013-08-10

    By CW Lid

    From Nashville, TN

    I ordered this radiator to replace the OEM product in a 6.2L diesel pickup. The shipped radiator is not as described or pictured. What is now shipped is a plastic tank/aluminum cored radiator. Very, very overpriced for that style of construction. The original is a Brass tank/Copper core with 3 rows. This one only has 2 rows in the core. It looks like it would fit, but not with the same performance as the original. Judging by one of the reviews, they must have in the past shipped the better style. Now they are shipping the cheaply made type. I returned this unit without issue. For a similar price, I ordered another radiator that was the heavy duty, all metal type. Way better radiator than the cheap plastic/aluminum one.

    Bottom Line not recommended

    I ordered this radiator to replace the OEM product in a 6.2L diesel pickup. The shipped radiator is not as described or pictured. What is now shipped is a plastic tank/aluminum cored radiator. Very, very overpriced for that style of construction. The original is a Brass tank/Copper core with 3 rows. This one only has 2 rows in the core. It looks like it would fit, but not with the same performance as the original. Judging by one of the reviews, they must have in the past shipped the better style. Now they are shipping the cheaply made type. I returned this unit without issue. For a similar price, I ordered another radiator that was the heavy duty, all metal type. Way better radiator than the cheap plastic/aluminum one.

    By CW Lid from Nashville, TN

    BOTTOM LINE not recommended

  • 4

    4

    2012-12-11

    4

    4

    RADIATOR for P30 chassis RV class A

    RADIATOR for P30 chassis RV class A

    Submitted 2012-12-11

    By lizard

    From campobello, sc

    the radiator is well built and is the old type-copper\brass construction. but will not work on the 1985 chevy vouge II for which i purchased it. this radiator is about 6" to wide and would have to be heavily modified to fit the rv application. I would recommend this product if it fits your application.

    Bottom Line recommended

    the radiator is well built and is the old type-copper\brass construction. but will not work on the 1985 chevy vouge II for which i purchased it. this radiator is about 6" to wide and would have to be heavily modified to fit the rv application. I would recommend this product if it fits your application.

    By lizard from campobello, sc

    BOTTOM LINE recommended

  from $855.99

  View Product
• 

  Carquest Premium - Radiator (Part No. 433161)

  Description

  All radiators are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensure optimal cooling.
  
  Product Features:

  • CARQUEST offers a complete line of automotive radiators covering over 98% of all North American vehicle applications.
  • CARQUEST provides value in many different ways: increased thermal performance, enhanced design features, and design commonization for maximum availability with the minimum amount of parts.
  • CARQUEST offers certified radiators that meets or exceeds the manufacturer's specifications that are ready to install out of the box.
  • Engineering and manufactured under ISO TS16949 quality system, every radiator is 100% leak tested.

  3.5

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  3.5

  3.5

  • 1

    1

    2022-08-13

    1

    1

    Not an exact fit.

    Not an exact fit.

    Submitted 2022-08-13

    By Keith

    From Flint, Michigan

    Drain on the wrong side.

    Bottom Line not recommended

    Drain on the wrong side.

    By Keith from Flint, Michigan

    BOTTOM LINE not recommended

  • 5

    5

    2021-05-23

    5

    5

    Good value

    Good value

    Submitted 2021-05-23

    By Robert

    From Undisclosed

    Not as nice as the copper one I took out but it does the job.

    Bottom Line NULL

    Not as nice as the copper one I took out but it does the job.

    By Robert from Undisclosed

    BOTTOM LINE NULL

  • 5

    5

    2021-05-02

    5

    5

    GOOD DEAL

    GOOD DEAL

    Submitted 2021-05-02

    By MARK

    From Undisclosed

    SO FAR SO GOOD, AS ADVERTISED. 1981 OLDSMOBILE

    Bottom Line NULL

    SO FAR SO GOOD, AS ADVERTISED. 1981 OLDSMOBILE

    By MARK from Undisclosed

    BOTTOM LINE NULL

  from $206.99

  View Product
• 

  Carquest Premium - Radiator (Part No. 433840)

  Description

  All radiators are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensure optimal cooling.
  
  Product Features:

  • CARQUEST offers a complete line of automotive radiators covering over 98% of all North American vehicle applications.
  • CARQUEST provides value in many different ways: increased thermal performance, enhanced design features, and design commonization for maximum availability with the minimum amount of parts.
  • CARQUEST offers certified radiators that meets or exceeds the manufacturer's specifications that are ready to install out of the box.
  • Engineering and manufactured under ISO TS16949 quality system, every radiator is 100% leak tested.

  3.5

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  3.5

  3.5

  • 5

    5

    2021-11-15

    5

    5

    Fit my 87 Chevy truck perfectly

    Fit my 87 Chevy truck perfectly

    Submitted 2021-11-15

    By 1987ChevyV20

    From Eustis FL

    Replaced my 34 year old radiator with this one. Fits well, cools well. For the price can't beat it. No leaks so far, holding up well.

    Bottom Line recommended

    Replaced my 34 year old radiator with this one. Fits well, cools well. For the price can't beat it. No leaks so far, holding up well.

    By 1987ChevyV20 from Eustis FL

    BOTTOM LINE recommended

  • 5

    5

    2021-11-15

    5

    5

    Fit my 87 Chevy truck perfectly

    Fit my 87 Chevy truck perfectly

    Submitted 2021-11-15

    By 1987ChevyV20

    From Eustis FL

    Fit in place of my original 34 year old radiator perfectly. 1987 Chevy 3/4 ton with 5.7 and manual trans. There are two sizes- 17" and 19". Looks like a few other reviews ordered the wrong height. This ones working great so far in my old truck. cooling better than the tired and leaky old one. For the price I'm happy. It fits and works.

    Bottom Line recommended

    Fit in place of my original 34 year old radiator perfectly. 1987 Chevy 3/4 ton with 5.7 and manual trans. There are two sizes- 17" and 19". Looks like a few other reviews ordered the wrong height. This ones working great so far in my old truck. cooling better than the tired and leaky old one. For the price I'm happy. It fits and works.

    By 1987ChevyV20 from Eustis FL

    BOTTOM LINE recommended

  • 1

    1

    2019-06-28

    1

    1

    Flippo-Jippo GARBAGE!!

    Flippo-Jippo GARBAGE!!

    Submitted 2019-06-28

    By DISAPPOINTED!!

    From Ohio

    Has plastic tanks. These are complete trash...everyone knows this. Advertised as meeting or exceeding OEM specs. Well OEM specs on my 1987 GMC 1500 truck was for a radiator that has metal tanks on it. So you're basically getting deceived on one hand and lied to (by omission) on the other. Now I have to pay $$$ to return this junk. Absolutely NEVER buy parts online unless you're ready for some surprises. And the radiator hose I bought from them was thinner and softer and flimsy'er than the one I was intending to replace....and absolutely no internal support for such a cheaply made hose. 1 Year (chump worthy) warranty. Pathetic....garbage. I'll never buy their FLIPPO-JIPPO junk parts again!!!! Beware buying online.....I bought their best (HD) and it's the cheapest quality trash I've ever seen....EVER! Geeze.....

    Bottom Line not recommended

    Has plastic tanks. These are complete trash...everyone knows this. Advertised as meeting or exceeding OEM specs. Well OEM specs on my 1987 GMC 1500 truck was for a radiator that has metal tanks on it. So you're basically getting deceived on one hand and lied to (by omission) on the other. Now I have to pay $$$ to return this junk. Absolutely NEVER buy parts online unless you're ready for some surprises. And the radiator hose I bought from them was thinner and softer and flimsy'er than the one I was intending to replace....and absolutely no internal support for such a cheaply made hose. 1 Year (chump worthy) warranty. Pathetic....garbage. I'll never buy their FLIPPO-JIPPO junk parts again!!!! Beware buying online.....I bought their best (HD) and it's the cheapest quality trash I've ever seen....EVER! Geeze.....

    By DISAPPOINTED!! from Ohio

    BOTTOM LINE not recommended

  from $216.99

  View Product
• 

  Carquest Premium - Radiator (Part No. 433165)

  Description

  All radiators are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensure optimal cooling.
  
  Product Features:

  • CARQUEST offers a complete line of automotive radiators covering over 98% of all North American vehicle applications.
  • CARQUEST provides value in many different ways: increased thermal performance, enhanced design features, and design commonization for maximum availability with the minimum amount of parts.
  • CARQUEST offers certified radiators that meets or exceeds the manufacturer's specifications that are ready to install out of the box.
  • Engineering and manufactured under ISO TS16949 quality system, every radiator is 100% leak tested.

  3.5

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  3.5

  3.5

  • 4

    4

    2019-07-09

    4

    4

    PN 433165 CLOSE FIT BUT NOT EXACT

    PN 433165 CLOSE FIT BUT NOT EXACT

    Submitted 2019-07-09

    By DAVES 442

    From SPOTSYLVANIA VA

    Bought for 1967 Olds 442 with auto trans. The radiator hoses fit ok, the trans cooling lines fit ok. Has a port near radiator cap for a temp sensor. Also looks like a port for trans cooler temp. It only has two core tubes but the tubes are twice as wide as the OEM so I guess it would compare to a four core. The end tanks are made of plastic like newer style OEM radiators. The bad part about the radiator is the OEM cradles at the top and bottom had to be pounded flat so it would fit and it was still very tight. If your looking for a drop in radiator with no modifications then this is not for you.

    Bottom Line recommended

    Bought for 1967 Olds 442 with auto trans. The radiator hoses fit ok, the trans cooling lines fit ok. Has a port near radiator cap for a temp sensor. Also looks like a port for trans cooler temp. It only has two core tubes but the tubes are twice as wide as the OEM so I guess it would compare to a four core. The end tanks are made of plastic like newer style OEM radiators. The bad part about the radiator is the OEM cradles at the top and bottom had to be pounded flat so it would fit and it was still very tight. If your looking for a drop in radiator with no modifications then this is not for you.

    By DAVES 442 from SPOTSYLVANIA VA

    BOTTOM LINE recommended

  • 1

    1

    2014-07-18

    1

    1

    Didnt fit

    Didnt fit

    Submitted 2014-07-18

    By LMVG

    From Virginia

    Inlet was 1.5" instead of 1.75" it is made to fit all GM models but doesn't fit anyone correctly. U.S. Radiators is were I ended up buying my last one and they are custom made with all your factory specifications required (4 speed, Air, Etc...)

    Bottom Line not recommended

    Inlet was 1.5" instead of 1.75" it is made to fit all GM models but doesn't fit anyone correctly. U.S. Radiators is were I ended up buying my last one and they are custom made with all your factory specifications required (4 speed, Air, Etc...)

    By LMVG from Virginia

    BOTTOM LINE not recommended

  • 5

    5

    2012-02-27

    5

    5

    4 row HD radiator

    4 row HD radiator

    Submitted 2012-02-27

    By FAST EDDIE

    From SOUTH CAROLINA

    1st radiator was defective looked opened and returned. Had a return sticker on box. you cant beat brass they say aluminum cools faster try to find someone to fix it or a plastic tank. I'll stick with brass you can repair it. durabilty cant beat it

    Bottom Line recommended

    1st radiator was defective looked opened and returned. Had a return sticker on box. you cant beat brass they say aluminum cools faster try to find someone to fix it or a plastic tank. I'll stick with brass you can repair it. durabilty cant beat it

    By FAST EDDIE from SOUTH CAROLINA

    BOTTOM LINE recommended

  from $565.99

  View Product
• 

  Carquest Premium - Radiator (Part No. 810729)

  Description

  All radiators are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensure optimal cooling.
  
  Product Features:

  • CARQUEST offers a complete line of automotive radiators covering over 98% of all North American vehicle applications.
  • CARQUEST provides value in many different ways: increased thermal performance, enhanced design features, and design commonization for maximum availability with the minimum amount of parts.
  • CARQUEST offers certified radiators that meets or exceeds the manufacturer's specifications that are ready to install out of the box.
  • Engineering and manufactured under ISO TS16949 quality system, every radiator is 100% leak tested.

  3.5

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  3.5

  3.5

  • 5

    5

    2021-11-10

    5

    5

    Great quality from Advance

    Great quality from Advance

    Submitted 2021-11-10

    By Paul

    From Flushing, MI

    Replaced PSP on a 07 Saturn Aura. Perfect fit and zero leaks.

    Bottom Line recommended

    Replaced PSP on a 07 Saturn Aura. Perfect fit and zero leaks.

    By Paul from Flushing, MI

    BOTTOM LINE recommended

  • 5

    5

    2021-11-02

    5

    5

    Perfect so far

    Perfect so far

    Submitted 2021-11-02

    By Gerald

    From Undisclosed

    Direct replacement, been about 2 weeks, no issues so far ?

    Bottom Line NULL

    Direct replacement, been about 2 weeks, no issues so far ?

    By Gerald from Undisclosed

    BOTTOM LINE NULL

  • 5

    5

    2021-07-18

    5

    5

    I would buy again

    I would buy again

    Submitted 2021-07-18

    By matt

    From Va

    Worked good

    Bottom Line recommended

    Worked good

    By matt from Va

    BOTTOM LINE recommended

  from $667.99

  View Product
• 

  Carquest Premium - Radiator (Part No. 433366)

  Description

  All radiators are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensure optimal cooling.
  
  Product Features:

  • CARQUEST offers a complete line of automotive radiators covering over 98% of all North American vehicle applications.
  • CARQUEST provides value in many different ways: increased thermal performance, enhanced design features, and design commonization for maximum availability with the minimum amount of parts.
  • CARQUEST offers certified radiators that meets or exceeds the manufacturer's specifications that are ready to install out of the box.
  • Engineering and manufactured under ISO TS16949 quality system, every radiator is 100% leak tested.

  3.0

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  3.0

  3.0

  • 3

    3

    2017-08-02

    3

    3

    Reasonable price, but not a drop-in solution

    Reasonable price, but not a drop-in solution

    Submitted 2017-08-02

    By Kyle

    From undisclosed

    Appears to be a decent piece, but it definitely does not fit the stock radiator mounts w/o some modification to the radiator core support.

    Bottom Line NULL

    Appears to be a decent piece, but it definitely does not fit the stock radiator mounts w/o some modification to the radiator core support.

    By Kyle from undisclosed

    BOTTOM LINE NULL

  • 3

    3

    2015-08-13

    3

    3

    Decent Radiator for Price

    Decent Radiator for Price

    Submitted 2015-08-13

    By Rob

    From NH

    I bought this product for my 1969 GMC 2500 truck with small block 350. This truck had the original 3 Core radiator which was leaking and freighted with sludge. The new radiator is less than half the weight. If your truck has the 3 core radiator mounts you will need to trim the rubber to get this to fit, or order the 4 core radiator mounts from big block trucks, or trucks with tow package. To my knowledge almost no new repop radiator on the market fits the 3 core mounts without some modification. I plan to order the 4 core mounts for the top and replace the current trimmed setup, but it looks factory as is when in place. The only thing I do not care for (which is common on most new radiators) is the lack of metal insert in the fill neck, and the plastic drain plug. I did not experience any leaks on initial test. Although I have not road tested the truck this is a 3 core radiator and being aluminum / copper instead of steel / copper should offer some slightly better performance than 40yr old technology. Bottom line worked, and price was cheap, but as with any old vehicle some modification is neccissary.

    Bottom Line NULL

    I bought this product for my 1969 GMC 2500 truck with small block 350. This truck had the original 3 Core radiator which was leaking and freighted with sludge. The new radiator is less than half the weight. If your truck has the 3 core radiator mounts you will need to trim the rubber to get this to fit, or order the 4 core radiator mounts from big block trucks, or trucks with tow package. To my knowledge almost no new repop radiator on the market fits the 3 core mounts without some modification. I plan to order the 4 core mounts for the top and replace the current trimmed setup, but it looks factory as is when in place. The only thing I do not care for (which is common on most new radiators) is the lack of metal insert in the fill neck, and the plastic drain plug. I did not experience any leaks on initial test. Although I have not road tested the truck this is a 3 core radiator and being aluminum / copper instead of steel / copper should offer some slightly better performance than 40yr old technology. Bottom line worked, and price was cheap, but as with any old vehicle some modification is neccissary.

    By Rob from NH

    BOTTOM LINE NULL

  • 3

    3

    2014-11-28

    3

    3

    it is working fine

    it is working fine

    Submitted 2014-11-28

    By PanheadDude

    From Hoschton,GA

    This radiator is constructed of aluminum and plastic, as most are in this price range these days. I had to fabricate mounts for the radiator, but that wasn't too much trouble nor did it come as a surprise to me. The bad radiator I removed from the truck was not the original or an 'exact fit replacement' radiator. I have no idea what vehicle the bad radiator came out of or was intended to fit. The new radiator is functioning well. A 3 star rating on this website is described as: "Average, Ordinary", which fits the bill for this radiator IMO. Oh yeah... a cool thing about this radiator is that there is a threaded brass female fitting (it comes plugged) in the right-hand tank that can be used to mount a temperature probe for use with an electric cooling fan. In this case I didn't need that feature but it is a cool option to have.

    Bottom Line recommended

    This radiator is constructed of aluminum and plastic, as most are in this price range these days. I had to fabricate mounts for the radiator, but that wasn't too much trouble nor did it come as a surprise to me. The bad radiator I removed from the truck was not the original or an 'exact fit replacement' radiator. I have no idea what vehicle the bad radiator came out of or was intended to fit. The new radiator is functioning well. A 3 star rating on this website is described as: "Average, Ordinary", which fits the bill for this radiator IMO. Oh yeah... a cool thing about this radiator is that there is a threaded brass female fitting (it comes plugged) in the right-hand tank that can be used to mount a temperature probe for use with an electric cooling fan. In this case I didn't need that feature but it is a cool option to have.

    By PanheadDude from Hoschton,GA

    BOTTOM LINE recommended

  from $476.99

  View Product
• 

  Keystone Collision - Radiator (Part No. RAD840)

  Description

  New Platinum Pro Radiator, With Standard Duty Transmission Oil Cooler
  
  Product Features:

  • With Standard Duty Transmission Oil Cooler, Made Of Plastic and Aluminum
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle

  from $309.99

  View Product
• 

  Autopart International Inc - Radiator (Part No. G10001938166API)

  from $229.61

  View Product
• 

  Autopart International Inc - Radiator (Part No. G10002027948API)

  from $158.14

  View Product