Chevrolet C30 Panel Steering and Chassis Parts

Essential Chevrolet C30 Panel Steering and Chassis Parts

Rare Parts – Tie Rod Sleeve (Part No.RP25395)

Tie Rod Sleeve

from

$31.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Complete with clamps
  • Used to set Toe in or out
  • replaces rusted or corroded sleeves
  • Used to connect inner and outer tie rod ends
See More

Powercraft – Pump Drive Shaft Seal Kit (Part No.8709)

Pump Drive Shaft Seal Kit

from

$13.29
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

National – Multi Purpose Seal (Part No.480821)

Multi Purpose Seal

from

$7.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

MOOG – Alignment Shim Multi-Pack (Part No.K100264)

Alignment Shim Multi-Pack

from

$20.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Construction and design validated by MOOG engineers
  • Easy to install
  • Shims provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
  • MOOG alignment parts can solve excessive tire wear and steering issues
See More

Lares – Remanufactured Power Steering Control Valve (Part No.25)

Remanufactured Power Steering Control Valve

from

$298.99
Power Steering Control Valves are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested and balanced to insure OE performance. Ball joints are properly lubricated. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More

Rare Parts – Tie Rod End (Part No.RP25466)

Tie Rod End

from

$57.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Restores OE alignment
  • Reduces tire wear
  • Improves steering response
See More

MOOG – Stabilizer Bar Bushing Kit (Part No.K5227)

Stabilizer Bar Bushing Kit

from

$10.29
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
  • EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • Inner sleeve is phosphate coated for corrosion protection
See More

Rare Parts – Idler Arm (Part No.RP20211)

Idler Arm

from

$288.99
Rare Parts prides itself in only manufacturing high quality chassis parts. Diamond Series parts will exceed OEM and aftermarket products. Examples would be: forged verses stamped housings, greaseable, tighter machining tolerances, and proper heat treat of ball studs and mating components. Every Diamond Series part is tested and inspected in our facility prior to being sold. So rest assured you are getting a quality part when quality counts.

Product Features:
  • Increased forging size
  • Precision machining tolerances
  • Heat treated components
  • Low friction
See More

Lares – New Steering Coupling Assembly (Part No.202)

New Steering Coupling Assembly

from

$52.99
New Rag Joint steering couplers are carefully engineered to OE specifications. All units are complete with lower casting, rubber disk and mounting bolts already assembled for easy, trouble free installation. All units are carefully packaged to insure safe arrival at your door
See More

MOOG – King Pin Set (Part No.8484T)

King Pin Set

from

$65.99
MOOG® Problem Solver® products incorporate proven design and engineering features for like new steering ease of installation and longer life. MOOG is the preferred steering and suspension brand of professional technicians and NASCAR crew chiefs.

Product Features:
  • Easy to install
  • Returns like-new steering
  • Long-lasting performance
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
See More

Rare Parts – Sway Bar Bushing (Part No.RP15160)

Sway Bar Bushing

from

$33.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Thermoplastic material
  • No Squeak
  • Restores vehicle handling
  • Improves body roll
See More

National – Multi Purpose Seal (Part No.PSK-1)

Multi Purpose Seal

from

$28.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Lares – Remanufactured Manual Steering Gear Box (Part No.8010)

Remanufactured Manual Steering Gear Box

from

$431.99
Manual Steering Gears are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is filled with a high quality grease with a special polymer to reduce oil separation. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Transmission Oil Cooler Hose

from

$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:
  • Transmission oil cooler hose
  • 11/32″ x 4-1/2′
  • Designed for transmission fluid applications
  • Made for tight-radius applications found in transmission cooler installations
  • Compatible with 11/32 in. OEM cooler systems
  • Tube made of black chemigum (nitrile)
  • Reinforced with 2-spiral synthetic
  • Covered in black Hypalon
  • Compatible with 11/32 in. OEM cooler systems
  • Tube made of black chemigum (nitrile)
  • Reinforced with 2-spiral synthetic
  • Covered in black Hypalon
See More

Rare Parts – Ball Joint (Part No.RP10104)

Ball Joint

from

$50.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Heat treated components
  • Dust seal to prevent contamination
  • Restores vehicle handling
  • Restores OE alignment
See More

Carquest Premium – Power Steering Pressure Hose Assembly, 1/4" Male Inv. Flare x 1/4" Male Inv. Flare (Part No.39992)

Power Steering Pressure Hose Assembly, 1/4" Male Inv. Flare x 1/4" Male Inv. Flare

from

$48.49
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More

National – Multi Purpose Seal (Part No.7013S)

Multi Purpose Seal

from

$18.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Powercraft – Control Valve Seal Kit (Part No.7864)

Control Valve Seal Kit

from

$24.29
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Carquest Premium – 3/8" I.D. Return Hose (J189) (sold by foot) (Part No.35001)

3/8" I.D. Return Hose (J189) (sold by foot)

from

$7.79
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More

Carquest Premium – Power Steering Repair Fittings, 3/8" Male Inv. Flare x 3/8" Beaded Tube (Part No.35015)

Power Steering Repair Fittings, 3/8" Male Inv. Flare x 3/8" Beaded Tube

from

$8.49
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Powercraft – Pump Seal Kit (Part No.8755)

Pump Seal Kit

from

$34.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Carquest Premium – 3/8" ID Return Hose (sold by each) (Part No.34995)

3/8" ID Return Hose (sold by each)

from

$2.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More

Powercraft – Power Cylinder Piston Rod Seal Kit (Part No.7906)

Power Cylinder Piston Rod Seal Kit

from

$22.79
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Rare Parts – Tie Rod End (Part No.RP25369)

Tie Rod End

from

$97.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Restores OE alignment
  • Reduces tire wear
  • Improves steering response
See More

Imperial – Mounting Kit System (Part No.226201)

Mounting Kit System

from

$11.49
Product Features:
  • Imperial mounting kit system
  • For installation of transmission coolers and electric fans
  • Provides quick, effective installation of Imperial products
  • Contains nylon mounting rods, foam pads and locking buttons
  • Atermarket electric fan and cooler mounting rods
  • Made with the highest quality materials
  • Quality machined for durability
  • Removable buttons for relocation
See More

Helping You Find the Right Steering and Chassis Parts for Your Chevrolet C30 Panel

You love your C30 Panel. So we’ve made it easier than ever to help you find Chevrolet C30 Panel Steering and Chassis Parts in our online catalog. Our inventory holds 46 aftermarket and OEM Steering and Chassis Parts for your Chevrolet C30 Panel, ranging from $2.99 to $431.99.

We offer parts from 9 brands trusted to make quality Steering and Chassis Parts for your Chevrolet C30 Panel. Before you buy, take some time to read through customer reviews. We currently have 1,453 reviews of Chevrolet C30 Panel Steering and Chassis Parts from previous customers. Some of the top rated parts include New Steering Coupling Assembly with 3.6 stars and Pump Complete Rebuild Kit with 3.8 stars.

Find your C30 Panel Steering and Chassis Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Chevrolet C30 Panel part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Steering and Chassis Parts Brands for Your Chevrolet C30 Panel

Our inventory holds Steering and Chassis Parts for your Chevrolet C30 Panel from 9 trusted brands. You’ll find OEM and aftermarket parts from brands like Imperial, Carquest Premium, and Powercraft, all of which can keep that Chevrolet happy.

Top-Rated Imperial Steering and Chassis Parts

Leading Imperial Steering and Chassis Parts

We carry Imperial brand parts for your Chevrolet C30 Panel across several catalog categories, including Power Steering Parts. Some of our most reviewed Imperial parts include:
Transmission Oil Cooler Hose
from $32.49
(94)
Transmission Oil Cooler Hose
Power Steering Pressure Hoses
Power Steering Oil Cooler
from $28.49
(83)
Power Steering Oil Cooler
Power Steering Coolers
Mounting Kit System
from $11.49
(27)
Mounting Kit System
Power Steering Coolers

FAQs for Chevrolet C30 Panel Steering and Chassis Parts

What are the most purchased Steering and Chassis Parts for the Chevrolet C30 Panel?

Out of 46 Steering and Chassis Parts for the Chevrolet C30 Panel, the most popular in our inventory are:
3/8" I.D. Return Hose (J189) (sold by foot)
from $7.79
This product is not rated
3/8" I.D. Return Hose (J189) (sold by foot)
Power Steering Reservoir Hoses
3/8" ID Return Hose (sold by each)
from $2.99
This product is not rated
3/8" ID Return Hose (sold by each)
Power Steering Return Hoses
Quick Connect Coupler
from $11.49
(3)
Quick Connect Coupler
Power Steering Pressure Hoses

What are the top-rated Chevrolet C30 Panel Steering and Chassis Parts?

Top-rated Steering and Chassis Parts for your Chevrolet C30 Panel based on customer reviews/ratings are:
New Steering Coupling Assembly
from $52.99
(16)
New Steering Coupling Assembly
“Very high quality item. Perfect replacement and fit. Easy to install. Do NOT buy the $10 one. Pay the [$] and you’ll see the high quality fittings and”
Pump Complete Rebuild Kit
from $62.99
(14)
Pump Complete Rebuild Kit
“everything I needed, all fit well.”
Pump Seal Kit
from $36.99
(5)
Pump Seal Kit
“Worked perfect!”