Chevrolet C2500 Truck Beds

New Standard Replacement Driver Or Passenger Side Cab Corner Extension

Product Features:

• Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Driver Side Outer Extension Cab Corner, 27 1/2 X 17 1/2

Product Features:

• 27 1/2 X 17 1/2, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

For the heavy-duty hauler and hardworking trailer blazer, a headache rack is a must-have truck accessory. It does not take much for a two-by-four, steel pipe or other loose cargo to put a good size crack in the rear window of your truck cab, especially when you stick to the off-road trail more than the paved road. The ARIES classic headache rack offers a hardy design and sturdy structure to make sure your truck is ready to work. Made from 1″ x 2″ carbon steel tubing, ARIES classic headache racks provide excellent protection for your truck cab, from both the heat of the sun and potential impact from unsecure cargo in your truck bed. The full louvers help keep your cab cooler throughout the day, and their heavy-duty construction helps block any damage from behind. The ARIES classic headache rack also features a dual-layer E-coat and semi-gloss black powder coat finish to maintain its sleek appearance, preventing damage from rust, scratches and UV rays. Installation is quick and easy with the ARIES headache rack. It is compatible with cross-bed truck tool boxes and includes all necessary hardware for a complete installation. When your pickup truck is more than just a show horse, ARIES has you covered. We understand that it’s about more than goofing off in the mud. When you have a job to finish and a workhorse to drive, an ARIES classic headache rack is a reliable tool in your belt.

Product Features:

• Heavy-duty 1″ x 2″ steel tube construction for a solid frame
• Dual-layer E-coat and black powder coat finish for maximum corrosion resistance
• Fully louvered center section to protect the cab and passengers
• Louvers also help keep the cab cooler by blocking direct sunlight
• Flat steel brackets bolt onto the truck bed walls (drilling may be required)
• Compatible with most crossover truck tool boxes

When it comes to your truck or SUV, you want quality, style, protection, and durability at a price you can afford. TrailFX offers you an array of products, whether it is for work or play, TrailFX has something for everyone needs. Step bars to grille guards, tool boxes to bed protection, whatever your need, we have you covered. TrailFX sources high quality products for trucks, SUVs, and cars at a price you can afford. Whether you need a nerf step for your SUV, a tool box for your truck, or a bug shield for your car, we want to make sure that you are supplied the quality, style, and durability you expect from a product.

Product Features:

• Round Tube Louvered Design With Space For The Cab Sliding Rear Window
• Exclusive Design
• Protects The Cab From Cargo That May Shift In The Truck Bed
• Protective Bars Also Function As Convenient Tie Down Point To Brace Or Secure Heavy Cargo

When a truck bed crossmember rusts, the only option has been to replace the entire bed. This kit allows replacement of only the failed floor supports to reduce repair costs.

Product Features:

• Saves money – this truck bed floor support repair kit allows you to replace only damaged crossmembers, not the entire bed
• Complete repair – includes 4 bed crossmembers painted in weldable primer and mounting hardware
• Application specific – made to match the dimensions and material for certain Chevrolet and GMC pick-up trucks
• Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

New Standard Replacement Bed Floor Support

Product Features:

• Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Cover rolls up in seconds to allow complete access. High quality, tear-resistant fabric. Dual automatic latches make it the most secure cover. Easy adjustment latches provide tight fit. Pre-assembled kits and easy to use clamps. Assured no drill installation in under 20 minutes. Includes adapter kit for use on cargo management systems. Black, leather look.

Product Features:

• Cover Rolls Up In Seconds To Allow Complete Access
• High Quality; Tear-Resistant Fabric
• Dual Automatic Latches Make It The Most Secure Cover
• Easy Adjustment Latches Provide Tight Fit
• Pre-Assembled Kits and Easy To Use Clamps
• Assure A No Drill Installation In Under 20 Minutes
• Includes Adapter Kit For Use On Cargo Management Systems

The HardFold has been designed with an extremely tough all aluminum underbody frame covered with our highest marine grade vinyl on top. This impact resistant cover offers maximum security with the ease of installation and operation. When needing to open, simply unclamp the EZ lock handles and fold the cover forward. The nylon straps hold the cover in the open position when you need to haul your cargo. This cover comes completely assembled with NO DRILLING! Installation time is less than 10 minutes.

Product Features:

• Dual Coated Vinyl
• Won’t Rot Or Mildew
• Water Tite Seals/Carwash Friendly
• No Drill/Easy Installation
• Theft Deterrent
• No Access with Tailgate Lock
• Includes Sure Seal Tailgate Seal, Torch LED Bed Light, Pro Clean 10 oz Spray Vinyl Cleaner, and PVC Truck Work Gloves

Cover rolls up in seconds to allow complete access. High quality, tear-resistant fabric. Dual automatic latches make it the most secure cover. Easy adjustment latches provide tight fit. Pre-assembled kits and easy to use clamps. Assured no drill installation in under 20 minutes. Includes adapter kit for use on cargo management systems. Black, leather look.

Product Features:

• Cover Rolls Up In Seconds To Allow Complete Access
• High Quality; Tear-Resistant Fabric
• Dual Automatic Latches Make It The Most Secure Cover
• Easy Adjustment Latches Provide Tight Fit
• Pre-Assembled Kits and Easy To Use Clamps
• Assure A No Drill Installation In Under 20 Minutes
• Includes Adapter Kit For Use On Cargo Management Systems

Cab Forward Truck Covers are designed as a quick and easy cover solution to protect your truck’s cab and hood. Sunbrella provides protection and years of service in intense sun climates like Arizona and other areas of the Sunbelt, where UV rays can rapidly degrade the paint and interior. Because of the use of acrylic fibers, which are naturally UV resistant, Sunbrella has long been the recognized leader in longwearing marine fabrics for bimini tops, sail covers and deck enclosures. Besides marine uses, Sunbrella is also used for commercial awnings due to its ability to provide UV blockage, along with a rich, woven finish. The acrylic fibers are solution dyed, before the fabric is woven, to assure the color goes all the way through the fabric. Using a special finish process, the material is then softened for use as a truck cab cover fabric. The fabric is exceptionally strong and, coupled with its UV resistance, it also makes an excellent cover for RV’s and trailers that spend extended time stored outside.

Product Features:

• Custom Protection for Front Half of Pickup
• Great for Use with a Camper
• Protects Interior From UV & Reduces Heat Build-up
• Easy to Use
• Cab Forward Covers Available in Multiple Fabrics

Cab Forward Truck Covers are designed as a quick and easy cover solution to protect your truck’s cab and hood. Sunbrella provides protection and years of service in intense sun climates like Arizona and other areas of the Sunbelt, where UV rays can rapidly degrade the paint and interior. Because of the use of acrylic fibers, which are naturally UV resistant, Sunbrella has long been the recognized leader in longwearing marine fabrics for bimini tops, sail covers and deck enclosures. Besides marine uses, Sunbrella is also used for commercial awnings due to its ability to provide UV blockage, along with a rich, woven finish. The acrylic fibers are solution dyed, before the fabric is woven, to assure the color goes all the way through the fabric. Using a special finish process, the material is then softened for use as a truck cab cover fabric. The fabric is exceptionally strong and, coupled with its UV resistance, it also makes an excellent cover for RV’s and trailers that spend extended time stored outside.

Product Features:

• Custom Protection for Front Half of Pickup
• Great for Use with a Camper
• Protects Interior From UV & Reduces Heat Build-up
• Easy to Use
• Cab Forward Covers Available in Multiple Fabrics

Truck Cab Cooler protects the cockpit area from UV rays and helps reduce heat build-up inside the vehicle. Easy to install, Cab Coolers use hook and loop fasteners under the mirrors and door handles (varies by model). Some patterns include adjustable webbing straps to wheel wells to securely hold the cover in place. Custom patterned for trucks and SUV’s.

Product Features:

• Protects Cab Area From UV & Heat Build-up
• Also Good For Snow & Ice Protection
• Easy to Install
• Stow Behind Seat

With over 70 years of manufacturing excellence, CARR is a third generation business that remains firmly committed to serving you. All CARR accessories are manufactured for a precise fit for today vehicles. Our manufacturing processes allows us to design products that give your vehicle unique personal style and appeal. Our cast aluminum construction is time-proven for durability and strength. All CARR products carry a limited lifetime warranty.

Product Features:

• Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
• Unique Design Gives The Vehicle A Rugged Off Road Look, While Being A Stylish Accent For Today Vehicles
• Rugged Tread Pattern Provides For Safe And Attractive Non-Slip Surface
• Innovative Stylish Design
• Strong Construction To Hold Up Under Extreme Conditions
• Exclusive New Multi-Mount System
• Rocker Panel Installation Provides For The Strongest And Easiest Installation Of Any Step Products

Uniquely designed diamond tread pattern provides a safe non slip surface on the flat step area. Our exclusive multi mount system is designed for precision fit and easier installation. Constructed of an extremely strong die cast aluminum alloy for the ultimate in quality and durability. Rocker panel installation provides for the strongest and easiest installation of any step products.

Product Features:

• Exclusive New Multi Mount System
• Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
• Rugged Diamond Tread Pattern Provides For Safe And Attractive Non Slip Surface
• Unique Design Gives The Vehicle A Rugged Off Road Look, While Being A Stylish Accent For Today Vehicles
• Strong Construction To Hold Up Under Extreme Conditions
• Mechanical Polished Finish That Will Not Rust, Crack Or Peel And Requires Very Little Maintenance
• Strongest And Easy Installation

The stylish and innovative design of these steps add to a vehicle rugged off road look. Available in three low maintenance, extremely durable finishes to complement your vehicle appearance. Easily installed using our new multi mount system for superior strength and rigidity. Rocker panel installation provides for the strongest and easiest installation of any step products.

Product Features:

• Exclusive New Multi Mount System
• Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
• Rugged Diamond Tread Pattern Provides For Safe And Attractive Non Slip Surface
• Unique Design Gives The Vehicle A Rugged Off Road Look, While Being A Stylish Accent For Todays Vehicles
• Strong Construction To Hold Up Under Extreme Conditions
• Mechanical Polished Finish That would not Rust, Crack Or Peel And Requires Very Little Maintenance
• Strongest And Easy Installation
• Limited Lifetime Warranty

New Standard Replacement Driver Side Cab Corner, 21 X 7 X 1

Product Features:

• 21 X 7 X 1, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Passenger Side Cab Corner, 21 X 7 X 1

Product Features:

• 21 X 7 X 1, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Driver Side Cab Corner Inner, 2 Door Extended Super Cab, 41 X 9 1/2 X 3 1/2

Product Features:

• 2 Door Extended Super Cab, 41 X 9 1/2 X 3 1/2, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Westin Bed Caps, constructed with high-impact ABS, give your vehicle a finished factory look while protecting your bed railing from the elements. Product installs quickly and easily with sturdy 3M tape. Available with or without stake pocket in black finish.

Product Features:

• Protects bed railing against damage
• Gives vehicle a finished factory look
• Installs quickly and easily with 3M tape
• Matching Tail Cap / Front Cap available
• Will work with tonneau covers, camper shells and tie-downs if properly installed
• Available in Smooth or Ribbed style
• Available with or without stake pocket holes
• Made in the USA

DogBx