from

$76.99

Designed and engineered for faster installation than original equipment using existing lines and no special tools. OEM plastic cylinders can be prone to cracking/breakage. TECHnovation Clutch Hydraulics aluminum castings are made from solid blocks that are bored and honed for accurate tolerances and maximum durability.

Product Features:

Engineered and supported in the U.S.A. by our tech support team of experts in clutch system function
Each unit includes vehicle-specific bulletins for accurate installation
Online videos show step-by-step installation and bleeding procedures
Includes pressure control valves, check valves, and fittings for ease of installation, bleeding, and maintaining OE performance levels

from

$88.99

This clutch hydraulic line is designed to match the fit and function of the original line on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this clutch hydraulic line is designed to match the fit and function of the original line on specified vehicles
Restores functionality – reliable replacement for a line that has failed due to fatigue or collision damage
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$29.99

The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.

Product Features:

Manufactured to meet or exceed original equipment specs
Eliminates grinding from damaged teeth
Increases starter drive life

from

$24.29

GM Genuine Parts Clutch Pilot Bearings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These bearings support the end of the transmission input shaft while the clutch is disengaged. They are located in the center of the flywheel in the crankshaft flange. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Support the end of the transmission input shaft while the clutch is disengaged
Allows for smooth changing of gears
Helps keep transmission input shaft properly aligned
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$13.87

Flywheel Bolt

from

$225.99

For modern, foot-operated clutches we offer hydraulic release systems that not only replace cable-actuated systems, they also fit into increasingly narrow engine compartments. Because there is no more friction from the cable, clutch wear is lowered dramatically while driving comfort improves.

from

$68.99

Clutch Fork

from

$26.99

FLYWHEEL SHIM

from

$115.99

Flywheel hot spots can cause chatter. Resurfacing a flywheel doesn’t always remove hot spots. The flywheel may look shiny and pretty, but the hot spots will often still be there. Service the System by replacing the flywheel and the clutch set at the same time. All flywheels come with a new ring gear.

Product Features:

Casting process closely monitored to ensure uniform density and balance retention
Eliminates chance of chatter due to hot spots not always removed by resurfacing
New ring gear ensures positive starter engagement
Engineered to properly fit the intended application with no modifications

from

$9.99

BALL STUD

from

$28.99

This clutch pivot ball is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this clutch pivot ball is designed to match the fit and function of the original part on specified vehicles
Ideal solution – this pivot ball is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$9.99

CLUTCH FORK

from

$8.99

CLUTCH FORK

from

$12.99

AT CLUTCH PLATE

from

$196.36

As an OE clutch, clutch system and component supplier, Sachs products are developed to meet the highest demands of the worlds’s leading car manufacturers. With a complete program to satisfy a one-stop-shop need for complete clutch system replacement parts, unsurpassed quality and unmatched Asian, Domestic and European coverage, SACHS brand confirms itself as the premier OE clutch product available to the aftermarket. In order to reduce installation time, SACHS Super Set Clutch Kits come with everything needed for installations. All kits included in the catalog have also been tested to meet or exceed OE specifications and cycle tested in order to reduce returns.

Product Features:

OE Quality and direct fit application.
Original Equipment Supplier
Clutch kit contains; disc, pressure plate, release bearing and pilot bearing when required.
Most complete clutch kit line offering in the industry
Unmatched Asian, Domestic and European coverage
Exclusive parts not available through other suppliers
Complete range of complimentary parts and upgrades

from

$160.99

LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

from

$52.00

The Sachs release bearing (also known as a throw-out bearing) is original equipment quality and maintains the equivalent fit and performance as the OE part it replaces. Sachs clutch release bearings offer the conventional alignment function in a lightweight, compact body.

Product Features:

Extended service life
Compact, lightweight design
Sealed for life with high performance, application-specific grease
Simplified assembly
Integrated functionality
Design flexibility

from

$95.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Design improvements include extended life and quiet operation
Industry leading coverage
Professional technicians know they can depend on National

from

$25.99

Designed and engineered for faster installation than original equipment using existing lines and no special tools. OEM plastic cylinders can be prone to cracking/breakage. TECHnovation Clutch Hydraulics aluminum castings are made from solid blocks that are bored and honed for accurate tolerances and maximum durability.

Product Features:

Engineered and supported in the U.S.A. by our tech support team of experts in clutch system function
Each unit includes vehicle-specific bulletins for accurate installation
Online videos show step-by-step installation and bleeding procedures
Includes pressure control valves, check valves, and fittings for ease of installation, bleeding, and maintaining OE performance levels

from

$53.99

Designed and engineered for faster installation than original equipment using existing lines and no special tools. OEM plastic cylinders can be prone to cracking/breakage. TECHnovation Clutch Hydraulics aluminum castings are made from solid blocks that are bored and honed for accurate tolerances and maximum durability.

Product Features:

Engineered and supported in the U.S.A. by our tech support team of experts in clutch system function
Each unit includes vehicle-specific bulletins for accurate installation
Online videos show step-by-step installation and bleeding procedures
Includes pressure control valves, check valves, and fittings for ease of installation, bleeding, and maintaining OE performance levels

from

$67.99

LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.

from

$61.99

Designed and engineered for faster installation than original equipment using existing lines and no special tools. OEM plastic cylinders can be prone to cracking/breakage. TECHnovation Clutch Hydraulics aluminum castings are made from solid blocks that are bored and honed for accurate tolerances and maximum durability.

Product Features:

Engineered and supported in the U.S.A. by our tech support team of experts in clutch system function
Each unit includes vehicle-specific bulletins for accurate installation
Online videos show step-by-step installation and bleeding procedures
Includes pressure control valves, check valves, and fittings for ease of installation, bleeding, and maintaining OE performance levels

from

$22.99

The importance of pressure plate bolts in a racing or Hi-Performance street application cannot be emphasized nearly enough. These fasteners play a key role in both the performance and safety of a vehicle. Because of this, ARP has developed special pressure plate bolts that are application specific to ensure the optimum grip length. ARP offers High Performance Series bolts that are made from a premium grade chrome moly and hardened to a nominal tensile strength of 180,000 PSI. The Pro Series bolts, originally developed for NASCAR competition, are stronger and rated at 200,000 PSI. Both models feature a large diameter, low profile design. Complete with washers.

Product Features:

High Performance Series Bolts That Are Made From A Premium Grade Chrome Moly And Hardened To A Nominal Tensile Strength Of 180,000 PSI
Special Application Specific Pressure Plate Bolts To Ensure The Optimum Grip Length
Large Diameter, Low Profile Design
Complete With Washers
Sold As A Kit
180,000 PSI