Chevrolet C20 Exhaust Parts
Top Chevrolet C20 Exhaust Parts Categories
We carry over 145 Exhaust Parts in inventory for the Chevrolet C20. If you’re looking for aftermarket Exhaust Parts for your Chevrolet C20, check out all these categories:
Essential Chevrolet C20 Exhaust Parts
Walker – SoundFX Muffler, Direct Replacement, No Fabrication Needed (Part No.18274)
from
$85.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX® direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and/or welding
- FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
Walker – Donut Exhaust Pipe Flange Gasket: Fiber with Steel, Heat Resistant, Premium Materials (Part No.31400)
from
$3.29
Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
- HEAT RESISTANT — Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER — Use premium Walker-½ accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed (Part No.15042)
from
$167.99
Designed to provide the required reduction in tailpipe emissions and meet EPA emissions requirements with assured compliance, Walker® Universal Catalytic Converters are available for pre-OBDII (1995 and older) vehicles.
Product Features:
See More
Product Features:
- EPA COMPLIANT — For use on pre-OBDII vehicles, 1995 and older. Not legal for sale or use in CA, CO and NY. Legal in ME on all pre-OBD vehicles only. Consult your state’s aftermarket converter regulations for details.
- NO BREAK IN REQUIRED — Ready to operate with application-specific converter shell design and mat compression, no converter break in required after installation
- DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
- OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
- BUY WITH CONFIDENCE — Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 5-year 50,000-mile/80,000-kilometer structural integrity warranty. Visit Walkerexhaust.com for details.
Walker – Tail Pipe Aluminized 55" (Part No.45766)
from
$42.99
Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Dynomax – 89006 Exhaust System Kit (Part No.89006)
from
$235.99
Give your vintage vehicle’s exhaust system an upgrade with a DynoMax® dual header kit. Designed to attach to OE manifolds, it features a special reducer that allows for a variety of mounting options.
Product Features:
See More
Product Features:
- COMPATIBILITY — Designed for a variety of full-size 1975-87 GMC trucks and Chevrolet/GMC SUVs 2WD; see product information for compatibility and engine spec
- BUILD IT YOURSELF — Design and custom fabricate your own exhaust system with this kit that attaches to OE manifolds
- FLEXIBLE MOUNTING — Special reducer design allows for a variety of mounting options
- IMPROVED FLOW CAPACITY – Smooth bends improve flow capacity over traditional bends
- SPECS — Extra-long tailpipes with side exits with a full 2.25-in. diameter; tail pipes exit each side of vehicle behind rear tires; for trucks with OE catalytic converter due to cross member location
- COMPLETE SOLUTION — Includes all the necessary clamps, hangers, flanges, gaskets, mounting hardware, intermediate, extension and tail pipes
- PREMIUM MATERIALS – Made from quality aluminized steel for durability and long life
- BETTER TOGETHER — Complete your system with premium DynoMax mufflers and DynoMax accessories for a complete performance exhaust system
Walker – Exhaust Spout/Tip (Part No.41736)
from
$5.09
Walker exhaust pipes are engineered to fit as direct OE replacement units and feature exceptional exhaust flow characteristics.
See More
Dorman – Double Ended Stud Kit – 3/8-16 x 1-1/4 in and 3/8-16 x 7/16 in (Part No.29200)
from
$9.99
This exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles. Made of quality materials, this hardware is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles
- Ideal solution – this stud and nut are reliable replacements for original parts that are missing or have failed due to wear
- Durable construction – these parts are made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Walker – Hanger Length 4 (Part No.35183)
from
$15.99
Complete your exhaust repair with Walker® exhaust hangers. Designed with OE-style features to support undercar exhaust components, Walker hangers are manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
- OE DESIGN — Designed with OE-style features for easy installation
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS — Made from quality steel for durability and long life
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Y Pipe Aluminized 24.5" (Part No.40259)
from
$146.99
Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Walker – Y Pipe Aluminized 22.5" (Part No.40372)
from
$115.99
Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Felpro – Exhaust Pipe Flange Gasket (Part No.60985)
from
$5.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Exhaust Pipe Flange Gasket (Part No.60986)
from
$4.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Flowtech – Afterburner; Headers (Part No.49150FLT)
from
$354.99Product Features:
- Innovative New Design
- Increase Horsepower/Torque
- Formed From Stainless Steel
- Premium High Temp Gray Finish
- Large 3in. Secondary Collector
- Increase Scavenging
- Smooth Exhaust Pulses
Hooker Headers – Super Comp. Header (Part No.2841HKR)
from
$823.99
Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- Long Tube Lengths
- Long Transition Collectors
- Monstrous Low-Mid Range Torque
- Keep Top End Horsepower
- Provides Finest Fit
- Most Durable Design Available
ARP Auto Racing – For Use With Chevy Big Block, 3/8"-16, 0.75"L, Hex Head, Natural, Ss, Set Of 16 (Part No.400-1102)
from
$40.49
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.
Product Features:
See More
Product Features:
- Material Is Not Affected By Corrosion Or Extreme Heat
- The Compact 12 Point Nut Lets You Easily Slip A Socket Close To The Pipe
- Substantially Stronger Than Grade 8 Hardware
- Nominally Rated At 170,000 PSI Tensile Strength
- 3/8″-16 Thread Size
- 1″ Underhead Length
Dorman – Exhaust Flange Hardware – Stud, Spring And Nut – 3/8-16 x 4.5 In. (sold by each) (Part No.675-209)
from
$7.99
This exhaust manifold bolt and spring kit provides a time-saving solution. Designed for direct replacement of rusted or damaged exhaust bolts and springs, it prevents exhaust leaks while allowing movement between the exhaust pipe and muffler.
Product Features:
See More
Product Features:
- Ideal replacement – the manifold bolt and spring match the fit and function of the original equipment hardware, including bolt diameter, thread pitch and head type
- Complete installation – this kit includes hardware required for securely attaching the manifold to the exhaust system
- Trustworthy construction – the kit’s bolt and spring are made of hardened steel for durable, long-lasting service life
- Quality tested – kit components have undergone extensive testing to ensure proper function and long service life
Taylor Gaskets – Header Gasket (Part No.66123)
from
$29.99
Header Gasket
Mr. Gasket – Ultra Seal; Exhaust Gasket Set (Part No.5904)
from
$35.99
Graphite impregnated facing and a steel expanded metal core. Superior tensile strength. Resists cracking and withstands intense heat. Resists deteriorating. Anti-stick properties and easy removal for disassembly.
Product Features:
See More
Product Features:
- Graphite-impregnated facing
- Steel expanded metal core
- Superior tensile strength
- Resists cracking
- Withstands intense heat
- Resists deteriorating
- Anti-stick properties
- Easy removal for disassembly
Walker – Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2.5 (Part No.35337)
from
$8.99
Complete your exhaust repair with an Exhaust Mate® U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker® accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2 (Part No.35335)
from
$1.99
Complete your exhaust repair with an Exhaust Mate® U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker® accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Flowmaster Inc. – Prebent Tailpipes – 2.50 in. Side Exit – Pair (Part No.15803)
from
$219.99
Prebent pipe kits. Flowmaster’s 16 gauge mandrel bent pipe kits are designed to fit perfectly onto your vehicle with all the quality and performance that you would expect from Flowmaster.
See More
Walker – Tail Pipe Aluminized 52.34" (Part No.45765)
from
$41.99
Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Walker – Intermediate Pipe Aluminized 31.25" (Part No.43784)
from
$30.99
Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Walker – Intermediate Pipe Aluminized 29.875" (Part No.43697)
from
$32.49
Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Walker – Intermediate Pipe Aluminized 63" (Part No.46372)
from
$59.99
Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Chevrolet C20 Exhaust Parts Categories
Helping You Find the Right Exhaust Parts for Your Chevrolet C20
You love your C20. So we’ve made it easier than ever to help you find Chevrolet C20 Exhaust Parts in our online catalog. Our inventory holds 145 aftermarket and OEM Exhaust Parts for your Chevrolet C20, ranging from $1.99 to $1,229.99.
We offer parts from 14 brands trusted to make quality Exhaust Parts for your Chevrolet C20. Before you buy, take some time to read through customer reviews. We currently have 5,054 reviews of Chevrolet C20 Exhaust Parts from previous customers. Some of the top rated parts include Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed with 4.6 stars and Direct Fit Exhaust Manifold: Without Heat Shield with 1.2 stars.
Find your C20 Exhaust Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Chevrolet C20 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Exhaust Parts Brands for Your Chevrolet C20
Our inventory holds Exhaust Parts for your Chevrolet C20 from 14 trusted brands. You’ll find OEM and aftermarket parts from brands like Felpro, Dorman, and Walker, all of which can keep that Chevrolet happy.
We have Felpro parts available for your Chevrolet C20 in categories like Exhaust Pipes. Some of the top-rated Felpro parts in these categories are:
Top-Rated Felpro Exhaust Parts
Leading Felpro Exhaust Parts
We carry Felpro brand parts for your Chevrolet C20 across several catalog categories, including Exhaust Pipes. Some of our most reviewed Felpro parts include:
FAQs for Chevrolet C20 Exhaust Parts
What are the most purchased Exhaust Parts for the Chevrolet C20?
Out of 145 Exhaust Parts for the Chevrolet C20, the most popular in our inventory are:
from
$11.29
(10)
Exhaust Stud Kit 3/8-16 x 2-1/2 In. and 3/8-16 x 3-1/4 In.
Exhaust Hangers and Hardware
from
$99.99
(13)
40 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound
Mufflers
What are the top-rated Chevrolet C20 Exhaust Parts?
Top-rated Exhaust Parts for your Chevrolet C20 based on customer reviews/ratings are:
from
$167.99
(5)
Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed
“Replaced stock converter and would use again.”
from
$151.99
(5)
Direct Fit Exhaust Manifold: Without Heat Shield
“the manifold is at least 1/2 inch closer to the head and makes contact thats not seen.after installing i had an exhaust leak on the gasket because the”
from
$191.99
(2)
Direct Fit Exhaust Manifold: With Heat Shield
“The Manifold was very easy to install. I picked it up at noon, and had it all torn apart and put back together withing and hour or so, Advance always ”
