Chevrolet C10 Pickup Performance and Racing Products

Essential Chevrolet C10 Pickup Performance and Racing Products

Energy Suspension – Body Cab Mount Set (Part No.3.4137G)

Body Cab Mount Set

from

$73.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:
  • Assures Longer Lasting Cab to Bed Alignment
  • Replace to Restore Ride Height
  • Gain Durability
  • Stronger Than Original Rubber Mounts
See More

Mr. Gasket – Ultra Seal: Screw-In Rocker Arm Studs (Part No.1076)

Ultra Seal: Screw-In Rocker Arm Studs

from

$65.99
Mr. Gasket screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street applications. OE style press in rocker studs can actually pull out of the cylinder head when using high lift camshafts. Includes sixteen studs 3/8-24 x 1.47 inch long top x 7/16-14 bottom.

Product Features:
  • Black Oxide Coated Grade 8 Steel
  • Kit Contains 16 Studs
  • Easy To Install
  • Heat Treated Steel
  • Grade 8 Steel
See More

Flowtech – Standard Header (Part No.11500SFLT)

Standard Header

from

$415.99


Product Features:
  • Fuel Economy From The Engine
  • Leak Test For Max Performance
  • Mandrel-Formed Power Plenum
  • Leakproof O-Ringed Port Seals
  • Include All Mounting Hardware
See More

Accel – Dist:Chev V8 Hei Vac W/Coil (Part No.59107C)

Dist:Chev V8 Hei Vac W/Coil

from

$210.99
Performance Replacement HEI Distributor, direct plug-in with OE type connectors, GM HEI equipped Cars, Trucks (Pre-Computer). High dielectric strength cap, brass male towers. ACCEL Performance Replacement Distributors are the perfect choice for your daily driver or street machine. Using all new components, these distributors feature High-performance ACCEL Electronics. All new components-housings are either new castings or turned from billet stock, centerless ground shaft with oil lite bushings. High dielectric strength cap, balanced rotor. Male tower distributor cap with brass cap and rotor contacts (Ford and AMC Models feature screw-mounted wire retainer for the ultimate plug wire retention). Iron or steel distributor gear. Direct plug-in replacement with factory-type connectors for plug and play installation.

Product Features:
  • Direct Plug In Factory Replacement Plug And Play
  • CNC Machined 6061 T6 Billet Aluminum Housing
  • High Dielectric Strenght Thermoplastic Cap With Br
  • 4 Topin Module With Dwell Control Triggers At 75 R
  • Easy Access Fully Adjustable Mechanical Advance
  • Adjustable Vacuum Advance
  • Includes Performance Coil
  • Fit non computerized vehicles
See More

Holley – Prem Street Carbs (Avengers) (Part No.0-80570)

Prem Street Carbs (Avengers)

from

$626.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

Product Features:
  • Vibratory Polished For Good Looks
  • Optimized Street Calibration That Works Out Of The Box
  • Factory Preset Electric Choke For Easy Startups
  • Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
  • No Unnecessary Trips Back To The Parts Store
  • Limited Lifetime Warranty
  • 100% Wet-Flow Tested To Assure It Arrives Ready To Run
  • Street Ready; Out Of The Box
See More

Mr. Gasket – Chrome Oil Fill Cap – Push-On Style W/Tube For Pvc Hookup – Fitting For Easy Pcv Hose Hook Up (Part No.2063)

Chrome Oil Fill Cap - Push-On Style W/Tube For Pvc Hookup - Fitting For Easy Pcv Hose Hook Up

from

$12.99
This chrome-plated steel push-on breather/oil filler cap fits over your oil filler tube. It has a side fitting for easy PCV hose (positive crankcase ventilation) hook up. Perfect compliment to Mr. Gasket matching chrome oil filler tube, #2066

Product Features:
  • Chrome plated steel
  • Fits stock factory oil filler tubes
  • Features side PCV hook up tube
  • Includes Rubber Grommet
See More

PerTronix – D700700 Advance Spring Kit Flame-Thrower Billet Distributor (Part No.D700700)

D700700 Advance Spring Kit Flame-Thrower Billet Distributor

from

$20.99
Performance mechanical advance springs.

Product Features:
  • PerTronix D700700 Advance Spring Kit Flame-Thrower Billet Distributor
  • Performance mechanical advance springs.
See More

Hays – Power Train (Part No.85-113)

Power Train

from

$641.99
Power Train

Hooker Headers – Dual Competition Manifold Back Exhaust System Kit (Part No.16621HKR)

Dual Competition Manifold Back Exhaust System Kit

from

$366.99
Designed to fit Hooker Competition header, Manifold or catalytic converter back applications. Cat-back kits install behind the converter and all other applicable emission control devices.

Product Features:
  • Reducer Flex-Tubes
  • Reduces Backpressure
  • Hardware Included
  • Instructions Included
See More

Mallory – Unilite Ignition Module (Part No.605)

Unilite Ignition Module

from

$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:
  • Service Part
  • No Moving Parts To Wear Out
  • Self Contained Unit
  • Can Drive OEM
  • Can Drive High Performance Ignition Coils
See More

Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

High Performance 180 Degree Thermostat for Increased Flow

from

$26.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:
  • Opens At 180 Degrees
  • Designed to Resist Large Variations of Coolant Pressure at High RPM
  • Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
  • For High Performance Street, Drag Race, and Oval Track
  • Copper & Brass Construction – Resists Corrosion
  • High Flow
See More

Mr. Gasket – Dust Cap (Part No.2485)

Dust Cap

from

$12.09
If you have custom steel or mag wheels that are not designed without a provision for a center cap, you’re probably looking at an ugly stock dust cap in the center of your front wheels. This chrome dust cap fixes that problem, and is a direct replacement for stock cap 1.790 inches in diameter. Two per set.

Product Features:
  • Chrome Plated Steel
  • Set of 2 Caps
  • Easy Installation
  • 2 Per Set
See More

Mr. Gasket – Ultra Seal: Cylinder Head Bolts (Part No.941G)

Ultra Seal: Cylinder Head Bolts

from

$73.99
These grade 8 alloy steel, longer length bolts are designed to compensate for thread length lost when using head bolt washers. This allows increased torque and clamping. Set of 16 does one cylinder head.

Product Features:
  • Cylinder Head Bolts
  • Longer-Than-Stock
  • High Quality Grade 8 Alloy
  • Increase Torque Settings
  • Higher Clamp Loads On Gasket
See More

Mallory – Distributor Condenser (Part No.401)

Distributor Condenser

from

$17.09
Distributor Condenser

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1606)

Engine Valve Cover Gasket Set

from

$27.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
  • Not intended for use in emission controlled vehicles.
See More

Mr. Gasket – Alternator Bracket (Part No.9850)

Alternator Bracket

from

$25.99
Hold your alternator securely in place with Mr. Gasket chrome alternator bracket. Chrome plated heavy gauge steel for long lasting good looks. Must be used with #9852.

Product Features:
  • Chrome Plated Steel
  • F-Style
  • Heavy Gauge Steel Construction
  • Fits Small Block Chevy 265-400 CID
  • Must Be Used With Part 9852
See More

Powertrax – Lock Right Locker (Part No.2415-LR)

Lock Right Locker

from

$442.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Accel – Custom Fit Spark Plug Wire Set (Part No.8843)

    Custom Fit Spark Plug Wire Set

    from

    $112.99
    These ACCEL wire sets are custom tailored for true street and strip performance use. Features oversize 8.8 mm ultra performance wires and spark plug boots, 550 degrees Fahrenheit double silicone construction with fiberglass braid. Spiral wound steel core conductor.

    Product Features:
    • 8.8mm Graphite Suppression
    • Silicone Spark Plug Boots
    • 550 Degree Double Silicone Construction
    • Fiberglass Braid
    • Carbon/Graphite Core
    • Magnetic Suppression
    • Fiberglass/Kevlar Core
    • 500 Ohms Resistance
    See More

    Edelbrock – Sure Seat Valve Springs for Big-Block Chevy 396-402-427-454 V8 (Part No.5862)

    Sure Seat Valve Springs for Big-Block Chevy 396-402-427-454 V8

    from

    $80.99
    Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

    Product Features:
    • For Use With Cast Iron Heads
    • Springs Made of Highest Quality Spring Wire
    • Springs Precision Wound To Close Tolerances
    • Use with Original Equipment Heads Only
    See More

    B & M – Flexplate For 168 Tooth 454 CID Engine (Part No.20233)

    Flexplate For 168 Tooth 454 CID Engine

    from

    $158.99
    As performance levels increase, an O.E. style flexplate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for 1965-90 Chevrolet big block 454ci (externally balanced) V8 engines with two piece rear main seal. Features include high tensile strength steel construction to resist elongation and cracking, dual bolt pattern 10.75 or 11.5 inch converter mounting locations, 168 tooth ring gear with double-sided welds for added strength and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953. Compatible with Powerglide, TH350, TH400 and TH700R4 automatic transmissions

    Product Features:
    • NHRA/IHRA Legal For All Classes
    • Includes SFI Certification Sticker
    • Ideal For Street Applications
    • To Extreme Duty Racing
    • To High RPM Use
    See More

    Edelbrock – TIMING CHAIN (Part No.7844)

    TIMING CHAIN

    from

    $29.99
    Product Features:
    • Timing Chain Only
    See More

    B & M – Transpak For 68-81 TH 350 Transmission (Part No.30228)

    Transpak For 68-81 TH 350 Transmission

    from

    $141.99
    The B&M Transpak has all the features in the Shift Improver Kit, plus it provides additional driver manual control. Retain full automatic features and standard shift points with selector in Drive.

    Product Features:
    • Recalibrate Auto. Transmission
    • Optimum Performance
    • Select Your App. Mode
    • Improves Transmission Life
    • Trans. Removal Not Required
    See More

    Mallory – Unilite Breakerless Ignition Conversion Kit (Part No.503M)

    Unilite Breakerless Ignition Conversion Kit

    from

    $176.99
    Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.

    Product Features:
    • Easy Installation
    • Improved Fuel Economy
    • Reduced Maintenance
    • Accurate Timing
    • Improved Performance
    • Provides A Simple Conversion
    • No Moving Parts To Wear Out
    See More

    Mr. Gasket – Aluminum Exhaust Gasket: High-Heat Resistant, Easy Removal (Part No.7401G)

    Aluminum Exhaust Gasket: High-Heat Resistant, Easy Removal

    from

    $42.99
    Upgrade to Mr. Gasket Aluminum Layered Header Gaskets and eliminate blown exhaust gaskets forever. They conform to warped and damaged surfaces to create an airtight, leak-proof seal and will not shrink or deteriorate EVER.

    Product Features:
    • Withstands Intense Exhaust Heat
    • Reusable header, exhaust manifold and collector flange gaskets
    • Resists Deteriorating
    • Manufactured from “dead soft” aluminum layers – .125″ thick
    • Easy Removal For Disassembly
    • Conforms easily to surface irregularities (warped flanges)
    • Compresses down to 0.060″ to create a tight leak-proof seal
    • Will not shrink, deteriorate, or blow out- eliminating gasket leaks
    • For high performance street, drag race and oval track use
    See More

    Mr. Gasket – Intake Gasket (Part No.143)

    Intake Gasket

    from

    $42.49
    Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. This is a low density material that conforms well to irregular surfaces and has very good crush resistance at high flange pressures. They provide excellent sealing and durability as the material is designed for sealing gasoline, oils, water and coolant in applications up to 350 degrees Fahrenheit. While die-cut for an excellent fit, they can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track.

    Product Features:
    • Manufactured from cellulose/nitrile composition gasket material
    • Provides excellent sealing and durability
    • Die-cut for an excellent fit
    • Can be trimmed if necessary for modified port applications
    • For OE replacement, high performance street, drag race and oval track use
    See More

    Chevrolet C10 Pickup Performance and Racing Products Categories

    Helping You Find the Right Performance and Racing Products for Your Chevrolet C10 Pickup

    You love your C10 Pickup. So we’ve made it easier than ever to help you find Chevrolet C10 Pickup Performance and Racing Products in our online catalog. Our inventory holds 307 aftermarket and OEM Performance and Racing Products for your Chevrolet C10 Pickup, ranging from $7.19 to $1,322.99.

    We offer parts from 25 brands trusted to make quality Performance and Racing Products for your Chevrolet C10 Pickup. Before you buy, take some time to read through customer reviews. We currently have 21,695 reviews of Chevrolet C10 Pickup Performance and Racing Products from previous customers. Some of the top rated parts include Blaster 2 Coil: High Performance Ignition Upgrade with 4.3 stars and High Performance 180 Degree Thermostat for Increased Flow with 4.2 stars.

    Find your C10 Pickup Performance and Racing Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Chevrolet C10 Pickup part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

    Top Performance and Racing Products Brands for Your Chevrolet C10 Pickup

    Our inventory holds Performance and Racing Products for your Chevrolet C10 Pickup from 25 trusted brands. You’ll find OEM and aftermarket parts from brands like Mr. Gasket, Accel, and Edelbrock, all of which can keep that Chevrolet happy.
    We have B & M parts available for your Chevrolet C10 Pickup in categories like Performance Engines. Some of the top-rated B & M parts in these categories are:
    Tork Master 2400
    from $339.99
    (1)
    Tork Master 2400
    Performance Torque Converters
    Tork Master 3000
    from $499.99
    (1)
    Tork Master 3000
    Performance Torque Converters

    Top-Rated Edelbrock Performance and Racing Products

    Leading Edelbrock Performance and Racing Products

    We carry Edelbrock brand parts for your Chevrolet C10 Pickup across several catalog categories, including Performance Fuel Systems. Some of our most reviewed Edelbrock parts include:

    FAQs for Chevrolet C10 Pickup Performance and Racing Products

    What are the most purchased Performance and Racing Products for the Chevrolet C10 Pickup?

    Out of 307 Performance and Racing Products for the Chevrolet C10 Pickup, the most popular in our inventory are:
    High Performance Transmission Mount for Street & Racing Vehicles
    from $41.99
    (17)
    High Performance Transmission Mount for Street & Racing Vehicles
    Performance Engine and Transmission Mounts

    What are the top-rated Chevrolet C10 Pickup Performance and Racing Products?

    Top-rated Performance and Racing Products for your Chevrolet C10 Pickup based on customer reviews/ratings are:
    Blaster 2 Coil: High Performance Ignition Upgrade
    from $49.99
    (20)
    Blaster 2 Coil: High Performance Ignition Upgrade
    “Had one before and blew it up, good easy replacement. MSD makes a good product.”
    High Performance 180 Degree Thermostat for Increased Flow
    from $26.99
    (20)
    High Performance 180 Degree Thermostat for Increased Flow
    “Installed in my 95 mustang perfect fit and working better than hopped or expected!!!”
    Dist:Chev V8 Hei Vac W/Coil
    from $210.99
    (19)
    Dist:Chev V8 Hei Vac W/Coil
    “Incredible product. Installed in a 71 C20 sbc 350. Performance is wonderful. Easy installation. Follow instructions to the letter, you will not be dis”