Chevrolet C10 Exhaust Parts
Top Chevrolet C10 Exhaust Parts Categories
We carry over 146 Exhaust Parts in inventory for the Chevrolet C10. If you’re looking for aftermarket Exhaust Parts for your Chevrolet C10, check out all these categories:
Essential Chevrolet C10 Exhaust Parts
Walker – Exhaust Pipe Flange Gasket (Part No.31508)
from
$8.89
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- HEAT RESISTANT – Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS – Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE – Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL – Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Hooker BlackHeart – Hooker BlackHeart Gen III Hemi Swap Exhaust Manifolds – Low Profile (Part No.BHS582)
from
$393.99
Product Features:
See More
- Gen III Hemi swap exhaust manifolds – a compact, high-flow design with a factory look that is ideal for engine swaps with limited space
- Choose from plain as-cast, black ceramic, or silver ceramic finishes – ceramic finish reduces underhood heat and resists corrosion
- Intended for Gen III Hemi engine swap applications where durability, quiet operation, and leak-free sealing are desired
- Cast from heavy-duty hi-silicon-moly ductile iron for long-lasting durability and corrosion resistance
- 2.50-inch outlet diameter offers improved flow for maximum performance from cast iron exhaust manifolds
- Includes collector flanges, Multi-Layer stainless Steel (MLS) collector gaskets, and bolts – that make it easy to fabricate downpipes
- Works with left or right-hand side starters and all popular transmissions
- The slotted bottom row of holes makes it easy to install (on pre-installed lower bolts and gaskets for each cylinder head)
- Ideal for use in applications that require Catalytic convertors
Dorman – Direct Fit Exhaust Manifold: without Heat Shield (Part No.674-159)
from
$155.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Product Features:
See More
Product Features:
- Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
- Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance
- Complete repair – includes all necessary gaskets and downpipe hardware
- Trustworthy design – built by industry leader in aftermarket manifolds
Dorman – Help – Manifold Bolt and Spring Kit – 3/8-16 x 3.5 In. (Part No.03110)
from
$9.99
Exhaust manifold fastener kits provide a time-saving solution for repairing the manifold. Each kit is designed for direct replacement of rusted or damaged exhaust bolts and springs.
Product Features:
See More
Product Features:
- Ideal replacement – the manifold bolt and spring match the fit and function of the original equipment hardware, including bolt diameter, thread pitch and head type
- Complete installation – this kit includes hardware required for securely attaching the manifold to the exhaust system
- Trustworthy construction – the kit’s bolt and spring are made of hardened steel for durable, long-lasting service life
- Quality tested – kit components have undergone extensive testing to ensure proper function and long service life
ARP Auto Racing – For Use With Chevy Big Block, 3/8"-16, 0.75"L, Hex Head, Natural, Ss, Set Of 16 (Part No.400-1102)
from
$44.99
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.
Product Features:
See More
Product Features:
- Material Is Not Affected By Corrosion Or Extreme Heat
- The Compact 12 Point Nut Lets You Easily Slip A Socket Close To The Pipe
- Substantially Stronger Than Grade 8 Hardware
- Nominally Rated At 170,000 PSI Tensile Strength
- 3/8″-16 Thread Size
- 1″ Underhead Length
Walker – Exhaust Tail Pipe 2.25" Inlet (ID) 2.25" Outlet (OD) (Part No.46425)
from
$44.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION – Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL – Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE – Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Flowmaster Inc. – Prebent Tailpipes – 2.50 in. Side Exit – Pair (Part No.15803)
from
$237.99
Prebent pipe kits. Flowmaster’s 16 gauge mandrel bent pipe kits are designed to fit perfectly onto your vehicle with all the quality and performance that you would expect from Flowmaster.
See More
Remflex – Flexible Graphite, Set Of 2, 1-1/4 Inch X 1-5/8 Inch Oval Port Size (Part No.2032)
from
$37.99
Remflex unique flexible graphite material has been proven for more than 30 years in industrial applications, where temperatures routinely exceed 2,000 degrees – day after day, week after week, year after year. Now, they are bringing this technology to enthusiasts of all kinds to eliminate exhaust leaks for good Whether you have an old pick-up that needs a manifold gasket, or a race car with custom-built headers, you can be assured that Remflex exhaust gaskets will work properly the first time, every time.
Product Features:
See More
Product Features:
- 100 Percent Flexible Graphite Construction
- Designed To Withstand Clamping Force And Incredible Heat
- Eliminate Exhaust Leaks
- No Re-Torquing Necessary, Remflex Exhaust Gaskets Rebound 30 Percent, Creating An Optimum Seal That Eliminates The Need To Re-Torque
Mr. Gasket – Exhsthdrgskt (Part No.7409G)
from
$48.99
Upgrade to Mr. Gasket Aluminum Layered Header Gaskets and eliminate blown exhaust gaskets forever. They conform to warped and damaged surfaces to create an airtight, leak-proof seal and will not shrink or deteriorate EVER.
Product Features:
See More
Product Features:
- Reusable header or exhaust manifold gasket set
- Reusable header, exhaust manifold and collector flange gaskets
- Manufactured from “dead soft” aluminum layers – .125″ thick
- Conforms to and seals surface irregularities (warp
- Will not shrink deteriorate or blow out
- Conforms easily to surface irregularities (warped flanges)
- Compresses to .060 creates tight leak proof seal
- Will not shrink, deteriorate, or blow out- eliminating gasket leaks
- For high performance street, drag race and oval track use
Walker – Exhaust System Hanger (Part No.35148)
from
$15.49
Complete your exhaust repair with Walker exhaust hangers. Designed with OE-style features to support undercar exhaust components, Walker hangers are manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- KEEPS EXHAUST PARTS IN PLACE – Designed to support undercar exhaust components
- OE DESIGN – Designed with OE-style features for easy installation
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality steel for durability and long life
- BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Dorman – Double Ended Stud Kit – 3/8-16 x 1-1/4 in and 3/8-16 x 7/16 in (Part No.29200)
from
$10.99
This exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles. Made of quality materials, this hardware is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles
- Ideal solution – this stud and nut are reliable replacements for original parts that are missing or have failed due to wear
- Durable construction – these parts are made from quality materials to ensure reliable performance and Length service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Walker – Exhaust Y Pipe, 2.5" Outlet (OD) (Part No.40372)
from
$115.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION : Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL : Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE : Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER : Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES : Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Walker – SoundFX Direct Fit Exhaust Muffler 2.5" Inlet (ID) 2" Outlet (OD) (Part No.18191)
from
$83.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION – Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST – Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- EASY TO INSTALL – Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and welding
- FACTORY SOUND – Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER – Designed and tested to extend muffler life
Walker – SoundFX Direct Fit Exhaust Muffler 2.5" Inlet (ID) 2.25" Outlet (OD) (Part No.18274)
from
$72.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION – Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST – Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- EASY TO INSTALL – Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and welding
- FACTORY SOUND – Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER – Designed and tested to extend muffler life
Walker – Exhaust Clamp (Part No.35336)
from
$2.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS – Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER – Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Clamp (Part No.35335)
from
$2.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS – Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER – Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Pipe Flange Gasket (Part No.31520)
from
$16.29
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- HEAT RESISTANT – Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS – Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE – Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL – Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Pipe Flange Gasket (Part No.31400)
from
$2.79
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
- HEAT RESISTANT : Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS : Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE : Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED : Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL : Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER : Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Hooker Headers – Dual Competition Manifold Back Exhaust System Kit (Part No.16622HKR)
from
$409.99
Designed to fit Hooker Competition header, Manifold or catalytic converter back applications. Cat-back kits install behind the converter and all other applicable emission control devices.
Product Features:
See More
Product Features:
- Reducer Flex-Tubes
- Reduces Backpressure
- Hardware Included
- Instructions Included
BRExhaust – Direct-Fit Exhaust System Kit (Part No.106-0705)
from
$137.99
BRExhaust Direct-Fit Replacement Exhaust Kit 106-0705 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 106-0705’s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0705 includes (2) 2.125in. U-Bolt Clamps, (3) 2.5in. U-Bolt Clamps and interchanges with OE parts 221344912. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0705 features durable Aluminized Steel construction and is covered by a limited warranty.
Product Features:
See More
Product Features:
- Bolt-on, multi-piece design for smooth and easy DIY installation around obstructions, ensuring quality fitment and function without requiring fabrication
- Bolt-on, multi-piece design for smooth and easy DIY installation around obstructions, ensuring quality fitment and function without requiring fabrication
- All components, gaskets, clamps, and hardware required, along with installation instructions, are packaged together in a single protective box
- Leaves all emissions equipment intact, maintaining emissions compliance
Flowtech – Terminator; Exhaust Tips (Part No.59905FLT)
from
$93.99Product Features:
- Show Quality Chrome Platinum
- Durable Black Finish
- Can Be Welded Or Clamped
- Complete The System
- Glass-Packed Resonators
MagnaFlow – Direct-Fit Standard Grade Federal / EPA Compliant Catalytic Converter (Part No.93432)
from
$201.99
Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93432. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Simplifies installation with essential gaskets and hardware being included in the box
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
MagnaFlow – Universal Standard Grade Federal / EPA Compliant Catalytic Converter (Part No.94016)
from
$126.99
Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94016. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design. With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Product Features:
See More
Product Features:
- Compact, lightweight construction enables installation in confined areas, welding is required
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
Walker – Standard EPA Direct Fit Catalytic Converter, 2.5" Inlet (ID) 2.5" Outlet (ID) 2.5" Outlet (OD) (Part No.15501)
from
$326.99
Designed to provide the required reduction in tailpipe emissions and meet EPA emissions requirements with assured compliance, Walker standard direct-fit catalytic converters are available for pre-OBD (1995 and older) vehicles.
Product Features:
See More
Product Features:
- EPA COMPLIANT : For use on pre-OBDII vehicles, 1995 and older. Not legal for sale or use in CA, CO and NY. Legal in ME on all pre-OBD vehicles only. Consult your state’s aftermarket converter regulations for details.
- DIRECT-FIT DESIGN : Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication and/or welding
- STRONG AND DURABLE : Features thick OE-style flanges, hangers and brackets for strength and durability
- OE-STYLE DESIGN : Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
Walker – CalCat CARB Universal Catalytic Converter – 2.5" Inlet (ID) 2.5" Outlet (ID) (Part No.80906)
from
$611.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.
Product Features:
See More
Product Features:
- CARB COMPLIANT – For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
- SUPERIOR TECHNOLOGY – Optimal high technology wash coat formulated to deliver superior performance (as compared to EPA-compliant converters)
- CONSISTENT PERFORMANCE – Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
- DURABLE – Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION – Customizable design features expandable bushings for easy fitment and may require specialized fabrication and welding for installation
- BUY WITH CONFIDENCE – Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity limited warranty
Chevrolet C10 Exhaust Parts Categories
Helping You Find the Right Exhaust Parts for Your Chevrolet C10
You love your C10. So we’ve made it easier than ever to help you find Chevrolet C10 Exhaust Parts in our online catalog. Our inventory holds 146 aftermarket and OEM Exhaust Parts for your Chevrolet C10, ranging from $2.09 to $1,322.99.
We offer parts from 16 brands trusted to make quality Exhaust Parts for your Chevrolet C10. Before you buy, take some time to read through customer reviews. We currently have 9,922 reviews of Chevrolet C10 Exhaust Parts from previous customers. Some of the top rated parts include High-Performance Mandrel-Bent Headers with Leakproof O-Ring Seals with 3.8 stars and 40 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound with 4.1 stars.
Find your C10 Exhaust Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Chevrolet C10 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Exhaust Parts Brands for Your Chevrolet C10
Our inventory holds Exhaust Parts for your Chevrolet C10 from 16 trusted brands. You’ll find OEM and aftermarket parts from brands like Felpro, Mr. Gasket, and Flowmaster Inc., all of which can keep that Chevrolet happy.
We have Hooker Headers parts available for your Chevrolet C10 in categories like Exhaust Manifold and Headers. Some of the top-rated Hooker Headers parts in these categories are:
Top-Rated Felpro Exhaust Parts
Leading Felpro Exhaust Parts
We carry Felpro brand parts for your Chevrolet C10 across several catalog categories, including Exhaust Gaskets and Exhaust Pipes. Some of our most reviewed Felpro parts include:
FAQs for Chevrolet C10 Exhaust Parts
What are the most purchased Exhaust Parts for the Chevrolet C10?
Out of 146 Exhaust Parts for the Chevrolet C10, the most popular in our inventory are:
from
$137.99
(21)
Super 44 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound
Mufflers
from
$24.79
(14)
Performance Exhaust Gasket Set for Enhanced Sealing and Durability
Exhaust Manifold Gaskets
from
$11.49
(10)
Exhaust Stud Kit 3/8-16 x 2-1/2 In. and 3/8-16 x 3-1/4 In.
Exhaust Hangers and Hardware
What are the top-rated Chevrolet C10 Exhaust Parts?
Top-rated Exhaust Parts for your Chevrolet C10 based on customer reviews/ratings are:
from
$242.99
(13)
High-Performance Mandrel-Bent Headers with Leakproof O-Ring Seals
“I put these on a 1982 4×4 Chevy truck. Perfect fit. Easy to install. They looks good and sound good!”
from
$101.99
(13)
40 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound
“fit great easy install sounds nice”
from
$175.99
(5)
Standard EPA Universal Catalytic Converter – 2.5" Inlet (ID) 2.5" Outlet (ID)
“Replaced stock converter and would use again.”
