Chevrolet Brookwood Fuel and Emissions Systems

Essential Chevrolet Brookwood Fuel and Emissions Systems

Dorman – Help – Air Check Valve (Part No.55050)

Air Check Valve

from

$8.49
The A.I.R. Check Valve is an emission control device that allows air into the exhaust system to help burn pollutants. Our A.I.R Check Valve is made to withstand the heat of the exhaust manifold.

Product Features:
  • Emissions, A.I.R Check Valves – 1994-64 AMC, GM, Chrysler, Fiat, Isuzu, Jaguar, Jeep, MG, Nissan,VW
  • Air Check Valve
  • The A.I.R. Check Valve is an emission control device that allows air into the exhaust system to help burn pollutants. Our A.I.R Check Valve is made to withstand the heat of the exhaust manifold.
  • Include gaskets and mounting hardware for a complete repair
  • Direct replacement for a proper fit every time
See More

ARP Auto Racing – For Use With Chevy, Hex Style Head Type, Polished, Stainless Steel, With Washers (Part No.430-1602)

For Use With Chevy, Hex Style Head Type, Polished, Stainless Steel, With Washers

from

$10.99
Make sure that mechanical fuel pumps stay properly aligned by using ARP durable black oxide finished chrome moly or rust proof stainless bolts(both materials are rated at 170,000 PSI and considerably stronger than Grade 8 hardware). Your choice of either conventional hex heads or 12 point head. Washers are included.

Product Features:
  • Nominally Rated At 170,000 PSI Tensile Strength
  • Properly Aligned
  • Conventional Hex Heads
  • Rust-Proof Stainless Bolts
  • 170,000 PSI
See More

Carquest Premium – Fuel Cap (Part No.10807)

Fuel Cap

from

$8.79
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Locking Fuel Cap: 10491, Push In, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10491)

Locking Fuel Cap: 10491, Push In, Direct Fit, Provides Tight Seal, 1 Pack

from

$24.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Protects your fuel from theft and vandalism
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Edelbrock – Fuel Injection Fuel Rail #3627, -6 AN Black Anodized For Chevrolet Small-Block (Part No.3627)

Fuel Injection Fuel Rail #3627, -6 AN Black Anodized For Chevrolet Small-Block

from

$211.99
All Edelbrock fuel rails are machined from high quality extruded aluminum. Each kit includes fuel rails, stands and mounting hardware. Fuel fittings, crossover line and regulator not included. 3627 Small-Block Chevy fuel rail kit is for use with Pro-Flo X

Product Features:
  • Black AnodizedFinish
  • High Capacity Fuel Rails
  • For Use W/ Pro-Flo XT Manifold #7137
  • -6 AN Inlet / Outlet
  • Made In The USA
See More

Edelbrock – EGR Valve Adapter #1476 For Intake Manifold #3701 And #3706 (Part No.1476)

EGR Valve Adapter #1476 For Intake Manifold #3701 And #3706

from

$83.99


Product Features:
  • EGR Adapter
  • Clears OEM Intake
  • Includes Gaskets and Bolts
See More

Flowtech – Reducer w/O2 Sensor Fitting (Part No.10105FLT)

Reducer w/O2 Sensor Fitting

from

$65.99


Product Features:
  • Reducer With O-Sensor Fitting
  • Made In USA
See More

Flowtech – Reducer w/O2 Sensor Fitting (Part No.10110FLT)

Reducer w/O2 Sensor Fitting

from

$65.99


Product Features:
  • Reducer With O-Sensor Fitting
  • Made In USA
See More

Carquest Premium – Mechanical Fuel Pump Includes Gasket (Part No.1542665)

Mechanical Fuel Pump Includes Gasket

from

$31.99
Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
  • All fuel pumps are 100% performance tested
  • Includes installation gaskets or seals where applicable
See More

Carquest Premium – Fuel Pump U2603416 (Part No.U2603416)

Fuel Pump U2603416

from

$57.99
Carquest Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
  • OE upgraded turbine impellers greatly reduce fuel pulsation
  • All fuel pumps are 100% performance tested
See More

Carquest Premium – Mechanical Fuel Pump 1541133: Includes Gasket (Part No.1541133)

Mechanical Fuel Pump 1541133: Includes Gasket

from

$89.99
Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
  • All fuel pumps are 100% performance tested
  • Includes installation gaskets or seals where applicable
See More

Carquest Premium – Mechanical Fuel Pump 1541126: Includes Gasket (Part No.1541126)

Mechanical Fuel Pump 1541126: Includes Gasket

from

$32.99
Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
  • All fuel pumps are 100% performance tested
  • Includes installation gaskets or seals where applicable
See More

Edelbrock – Mechanical Fuel Pump Block-Off Plates for Big-Block Chevy (Part No.4020)

Mechanical Fuel Pump Block-Off Plates for Big-Block Chevy

from

$34.99
Edelbrock part #4020 is a mechanical fuel pump block off plate for small-block Chevy applications. It is a billet aluminum part with counter sunk bolt holes.

Product Features:
  • Black Anodized Finish
  • Billet Aluminum Material
  • Mounting Hardware Included
  • Includes 1.5 mm Gasket
  • For Small-Block Chevy
See More

Holley – Mechanical Fuel Pump Mounting Pad Cover (Part No.12-814)

Mechanical Fuel Pump Mounting Pad Cover

from

$24.49
Fuel pump mounting pad cover is used to cover the hole in the block when the mechanical fuel pump is removed to use an electric pump.

Product Features:
  • Cover Hole In Block When Mech. Fuel Pump Is Removed
See More

Mr. Gasket – Fuel Pump Block-Off Plate (Part No.1516)

Fuel Pump Block-Off Plate

from

$12.99
Precision cut to cover stock fuel pump opening when converting to an electric fuel pump. Gasket included.

Product Features:
  • Chrome Plated Steel
  • Comes With Gasket
  • Easy Installation
See More

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Fuel Tank Cleaning Kit

from

$12.49
When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:
  • Helps avoid premature fuel pump failure
  • Lint free towel included
  • Low suds formulation
  • Removes harmful contaminants from the fuel tank
See More

ARP Auto Racing – Chrome Moly (Part No.134-8701)

Chrome Moly

from

$22.99
Stock fuel pump pushrods leave a lot to be desired. In fact, they have been known to break at the most inopportune time. To provide you with required reliability and improved performance, ARP has developed these sophisticated and durable pushrods. they are made from premium grade aerospace chrome moly and center less ground to precise diameter. A hollow core serves to reduce the reciprocating mass, which requires less energy to operate. The less drag on the motor, the more power available to you

Product Features:
  • Made From Premium Grade Aerospace Chrome Moly
  • Center Less Ground To Precise Diameter
  • Hollow Core Serves To Reduce The Reciprocating Mass, Which Requires Less Energy To Operate
  • Provide With Required Reliability And Improved Performance
See More

Carquest Premium – Fuel Pump Push Rod PR2584015 (Part No.PR2584015)

Fuel Pump Push Rod PR2584015

from

$20.99
Carquest Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
  • OE upgraded turbine impellers greatly reduce fuel pulsation
  • All fuel pumps are 100% performance tested
See More

Competition Cams – FUEL PUMP PUSH ROD, CHEVY 1 EA (Part No.4607)

FUEL PUMP PUSH ROD, CHEVY 1 EA

from

$53.99
When a high pressure fuel pump is run with a steel roller cam core, the stock fuel pump pushrod is not compatible with the steel core. You can damage an expensive roller cam as a result of wear at the fuel pump lobe. COMP Cams offers several fuel pump pushrods for various applications.

Product Features:
  • Lightweight tubing with bronze tip for steel cams
  • 5.75″ Length
  • Eliminates wear at the fuel pump lobe often caused by a stock fuel pump pushrod
See More

Dorman – Help – Fuel Pump Push Rod (Part No.03875)

Fuel Pump Push Rod

from

$15.29
Our Fuel Pump Push Rod is constructed from high-quality materials for a long service life. Replacement helps restore the fuel pump to proper operation so that your vehicle runs smoothly.

Product Features:
  • Direct replacement – this fuel pump push rod is designed to match the fit and function of the original rod on specified vehicles.
  • Ideal solution – this rod is a reliable replacement for an original part that has failed
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Helping You Find the Right Fuel and Emissions Systems for Your Chevrolet Brookwood

You love your Brookwood. So we’ve made it easier than ever to help you find Chevrolet Brookwood Fuel and Emissions Systems in our online catalog. Our inventory holds 37 aftermarket and OEM Fuel and Emissions Systems for your Chevrolet Brookwood, ranging from $8.49 to $211.99.

We offer parts from 10 brands trusted to make quality Fuel and Emissions Systems for your Chevrolet Brookwood. Before you buy, take some time to read through customer reviews. We currently have 2,079 reviews of Chevrolet Brookwood Fuel and Emissions Systems from previous customers. Some of the top rated parts include Performer RPM Series fuel pump for SBC and W Series Chevy with 3.4 stars and Locking Fuel Cap: 10571, Push In, Direct Fit, Provides Tight Seal, 1 Pack with 4.5 stars.

Find your Brookwood Fuel and Emissions Systems here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Chevrolet Brookwood part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Fuel and Emissions Systems Brands for Your Chevrolet Brookwood

Our inventory holds Fuel and Emissions Systems for your Chevrolet Brookwood from 10 trusted brands. You’ll find OEM and aftermarket parts from brands like Carquest Premium, Delphi, and Mr. Gasket, all of which can keep that Chevrolet happy.
We have Dorman – Help parts available for your Chevrolet Brookwood in categories like Fuel Pumps. Some of the top-rated Dorman – Help parts in these categories are:
Fuel Pump Push Rod
from $15.29
(1)
Fuel Pump Push Rod
Fuel Pump Pushrods

Top-Rated Mr. Gasket Fuel and Emissions Systems

Leading Mr. Gasket Fuel and Emissions Systems

We carry Mr. Gasket brand parts for your Chevrolet Brookwood across several catalog categories, including Fuel Pumps. Some of our most reviewed Mr. Gasket parts include:
Electric Fuel Pump
from $64.99
(37)
Electric Fuel Pump
Fuel Pumps
Fuel Pump Block-Off Plate
from $12.99
(2)
Fuel Pump Block-Off Plate
Fuel Pump Block-Off Plates

FAQs for Chevrolet Brookwood Fuel and Emissions Systems

What are the most purchased Fuel and Emissions Systems for the Chevrolet Brookwood?

Out of 37 Fuel and Emissions Systems for the Chevrolet Brookwood, the most popular in our inventory are:
Fuel Tank Cleaning Kit
from $12.49
This product is not rated
Fuel Tank Cleaning Kit
Fuel Tank Cleaning Kits

What are the top-rated Chevrolet Brookwood Fuel and Emissions Systems?

Top-rated Fuel and Emissions Systems for your Chevrolet Brookwood based on customer reviews/ratings are:
Performer RPM Series fuel pump for SBC and W Series Chevy
from $168.99
(5)
Performer RPM Series fuel pump for SBC and W Series Chevy
“Items received quickly, looks like thier 20 years old”
Locking Fuel Cap: 10571, Push In, Direct Fit, Provides Tight Seal, 1 Pack
from $22.99
(4)
Locking Fuel Cap: 10571, Push In, Direct Fit, Provides Tight Seal, 1 Pack
“Exact fit replacement, no problems what so ever.”
Fuel Cap
from $8.79
(2)
Fuel Cap
“Product worked perfectly however the first two boxes had the incorrect cap in it. It should have a sticker on it that states non-vented cap.”