Chevrolet B60 Drivetrains

Essential Chevrolet B60 Drivetrains

Driveworks – Ball Bearing (Part No.S-205-FF)

Ball Bearing

from

$6.49
Product Features:
  • Brand may vary by location
See More

FAG US – HANGER BEARING (Part No.CH0158)

HANGER BEARING

from

$44.49
HANGER BEARING

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6040)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$17.79
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 81-88; CCC 87-13; CHEV 60-97; DODGE 78-81; FORD 75-98; GMC 79-97; INTL 57-02; KW 81-18; MACK 80-93; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1957-2018
  • Weight approx: 4 Lbs
  • BEARING ID / BORE: 1.7680 INCH / 45 MM
  • CENTERLINE: 2.75 INCH / 70 MM
  • MOUNT WIDTH: 7.62 INCH / 194 MM
See More

FAG US – SHAFT SEAL (Part No.SS2993)

SHAFT SEAL

from

$23.99
SHAFT SEAL

National – Multi Purpose Bearing (Part No.HB-88509)

Multi Purpose Bearing

from

$80.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Multi Purpose Bearing (Part No.HB-88508-AB)

Multi Purpose Bearing

from

$50.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Valvoline – DEX/MERC Automatic Transmission Fluid, 1 Gallon (Part No.773636)

DEX/MERC Automatic Transmission Fluid, 1 Gallon

from

$35.99
Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Product Features:
  • Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
  • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
  • Developed with anti-wear technology to help improve transmission durability
  • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

Valvoline – DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)

DEXRON - VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart

from

$14.49
Valvoline DEXRON-VI/MERCON LV ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors DEXRON-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON-II and/or DEXRON-III are recommended. Recommended for use in the following applications: DEXRON-VI, DEXRON-III, DEXRON-II, and Allison C-4.

Product Features:
  • Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
  • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
  • Developed with anti-wear technology to help improve transmission durability
  • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

FAG US – AXLE BEARING (Part No.FC67147)

AXLE BEARING

from

$36.49
AXLE BEARING

FAG US – CONE (Part No.KLM102949)

CONE

from

$21.99
CONE

FAG US – TAPERED ROLLER BEARI (Part No.KT47)

TAPERED ROLLER BEARI

from

$28.99
TAPERED ROLLER BEARI

FAG US – CUP (Part No.M802011)

CUP

from

$15.29
CUP

National – Shaft Repair Sleeve (Part No.99225)

Shaft Repair Sleeve

from

$28.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Helping You Find the Right Drivetrains for Your Chevrolet B60

You love your B60. So we’ve made it easier than ever to help you find Chevrolet B60 Drivetrains in our online catalog. Our inventory holds 17 aftermarket and OEM Drivetrains for your Chevrolet B60, ranging from $4.49 to $88.99.

We offer parts from 6 brands trusted to make quality Drivetrains for your Chevrolet B60. Before you buy, take some time to read through customer reviews. We currently have 1,007 reviews of Chevrolet B60 Drivetrains from previous customers.

Find your B60 Drivetrains here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Chevrolet B60 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Drivetrains Brands for Your Chevrolet B60

Our inventory holds Drivetrains for your Chevrolet B60 from 6 trusted brands. You’ll find OEM and aftermarket parts from brands like Valvoline, National, and Anchor, all of which can keep that Chevrolet happy.

FAQs for Chevrolet B60 Drivetrains

What are the most purchased Drivetrains for the Chevrolet B60?

Out of 17 Drivetrains for the Chevrolet B60, the most popular in our inventory are:
Shaft Repair Sleeve
from $28.99
This product is not rated
Shaft Repair Sleeve
Differential Pinion Pilot Bearings
Multi Purpose Bearing
from $50.99
This product is not rated
Multi Purpose Bearing
Drive Shaft Center Supports
Ball Bearing
from $6.49
This product is not rated
Ball Bearing
Center Support Bearings