Chevrolet Avalanche Air Suspension and Kits

This air suspension shock is designed to match the fit and function of the original shock on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this air suspension shock is designed to match the fit and function of the original shock on specified vehicles
• Restores functionality – reliable replacement for an original part that has failed due to internal rubber components that have torn or rotted
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This air suspension compressor line repair kit is designed to match the original components required to repair the air suspension compressor on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this air suspension compressor line repair kit is designed to match the original components required to repair the air suspension compressor on specified vehicles
• Ideal solution – this kit is a reliable replacement for original components that have failed due to damage or fatigue
• Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Timbren suspension enhancement system – The decision is easy, Timbren suspension kits (SES kits) are designed to enhance the suspension of your vehicle. Improve load handling haul heavy loads with ease eliminate sag and sway.

Product Features:

• Eliminate Suspension Sag: When Towing A Heavy Trailer, Timbren SES Extends The Life Of The Suspension Of Your Vehicle And Helps To Avoid Bottoming Out
• Control Trailer Sway, A Condition Which Occurs With Unbalanced Loads, In Crosswinds Or When Passing Heavy Trucks Timbren SES Stabilizes Your Vehicle
• Control Body Roll, During Cornering With Powerful Progressive Rate Rubber Springs Which Resist Lean And Enhance Vehicle Stability
• Improve The Ride, By Allowing The Aeon(R) Rubber Springs Absorb Road Shocks And Bumps. Towing A Trailer Doesnt Have To Mean Poor Ride Quality
• Economical And Trouble Free
• Simple And Easy To Install

SUSP KIT

ShkAbsrbr

The yaw rate sensor is part of the stability control system which works in conjunction with the anti-lock brake system. The sensor measures the lateral movement of the vehicle, should the vehicle begin to move in a sideways direction, the anti-lock brake system will operate the brake system in a manner which may avoid a loss of vehicle control.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
• Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

Discover the difference Coil Rite air helper springs can make in improving the ride, handling and braking of your vehicle. Coil Rite air helper springs provide extra support for coil springs in cars, minivans, vans, light trucks, RVs and SUVs. The adjustable Coil Rite air helper springs will level your vehicle, provide a smoother ride, and assist with more effective braking and handling, even under heavy loading and adverse road conditions. Coil Rite air helper springs are designed to fit inside existing coil spring suspensions, creating a variable rate spring. These air helper springs are made of durable, elastic polyurethane, providing years of comfort and stability to your vehicle. Firestone Coil Rite air helper springs enable adjustment for varying loads and road conditions by controlling the air pressure in the air helper springs. Spring performance can be altered as easily as inflating a tire. The air springs will support 500 To 1000 Pounds per set.

Product Features:

• Made Of Durable Polyurethane To Withstand The Rigors Of Coil-Sprung Suspensions
• Increase Vehicle Stability Absorbs Road Shock Providing A Smooth Ride For Passengers And Load
• Keep The Vehicle Level, Improves Steering Control And Braking Effectiveness, Levels Headlight Beams And Reduces Tire Wear
• Reduce Bottoming Out, Protective Air Cushion Softens Contact Between The Axle And Frame
• Discover The Difference Coil Rite Air Helper Springs Can Make In Improving The Ride, Handling And Braking Of Your Vehicle
• No Drill Installation
• Everything Is Included For A Quick, Easy Installation. Brackets, Air Springs, Hardware, Air Line, And Separate Valves For Manual Inflation

Max Performance Synthetic Power Steering Fluid

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

• Our units are all pre-aligned & pre-adjusted to save installation time and ensure proper switching.
• A lubricated felt pad that lubricates the cam lobes on the vehicles distributor. This reduces wear on the point set rubbing block, extending the usable life of the part.
• Ventilated where available, tungsten contacts, which run cooler and exhibit less erosion.
• The copper-alloy shunt provides superior resistance to breakage, due to the flexing of the moving arm on the point set. It also significantly increases current conductivity over typical steel, shunts.

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Protective outer coverings help provide long-lasting durability
• Color-coded wires allow for easy installation
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

The Air Command Standard Duty Dual Electric Air Compressor System Kit Allows You To Adjust Your Air Springs With The Touch Of A Button. It Offers A Built in Air Source For Your Suspension System, Making It Easy To Alter Your Springs To Align With The Load Type And Environment. When Shopping For Air Accessories, You will Find That Firestone Air Command Standard Duty Dual Electric Air Compressor System Kit Is Designed To Have A Couple Of Special Benefits. First, The Air Command Standard Duty Dual Electric Air Compressor System Kit Comes Ready To Install, So You Can Set It Up And Get Back To The Road where You Want To Be. Just Connect A Few Wires To The Compressor And A Few To Your Vehicle. The Air Lines And Wiring Harness Can Be Plugged Into The Same Side Of The Unit For Smoother Routing Of Lines And Power Supply. After The Air Command Standard Duty Dual Electric Air Compressor System Kit Is Properly Installed, You Can Make Pressure Adjustments By Pressing A Single Button. This Air Command Standard Duty Dual Electric Air Compressor System Kit Component Allows For Side To Side Or Front to rear Leveling, Real time Pressure Readout, And Dual Left And Right PSI And Pressure Control Readouts. The Air Command Standard Duty Dual Electric Air Compressor System Kit Easy to read Needle Gauge Can Be Viewed Day Or Night, Without Straining Or Squinting Your Eyes. Prior To Installing The Air Command Standard Duty Dual Electric Air Compressor System Kit, Review The Instructions And Identify All Of The Components To Help Make Sure You Get Maximum Performance From Both Your Air Springs And Air Command Standard Duty Dual Electric Air Compressor System Kit. The Installation Steps Are Different Depending On Whether You are Enhancing An Existing Air Helper Spring System With The Air Command Standard Duty Dual Electric Air Compressor System Kit Or Installing It With A New Air Spring System.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
• Light Duty Compressor Specs (120 PSI Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

The original air compressor on certain GM vehicles fails due to burn out or moisture intrusion. This Dorman OE FIX features thermal protection software and an additional protective membrane to prevent future failures.

Product Features:

• Upgraded replacement – this air compressor replaces and improves on the original part for certain Cadillac, Chevrolet and GMC vehicles
• Enhanced technology – features advanced thermal protection software to prevent future burn out
• More durable – addition of protective membrane prevents moisture intrusion
• Complete repair – brackets, dryer, air filter boxes, sealed sound isolation shielding, wiring harness and connectors included

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.

The body control system monitors the vehicle ride height on vehicle applications utilizing an air ride suspension system. Maintaining system ride height is critical for vehicle and braking control.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

The body control system monitors the vehicle ride height on vehicle applications utilizing an air ride suspension system. Maintaining system ride height is critical for vehicle and braking control.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

Gas Shock

Shock Kit

Monroe is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.

Convert a vehicle’s factory-equipped air suspension to a conventional suspension with a Monroe® Suspension Conversion Kit. Includes premium components – application-tuned shock/strut, coil spring(s) and hardware.

Product Features:

• PERFECT PAIRING — Purchase Monroe« conversion kit part numbers 90027C1, 90027C2 and 90027C3 for a complete four-corner repair (each part number sold separately)
• CONVERT YOUR RIDE — An alternative to replacing the OE system, this conversion kit converts a factory electronic suspension to a conventional suspension
• COMPLETE SOLUTION — Includes premium-quality replacement components – application-tuned shock/strut, coil spring(s) and necessary mounting hardware
• RESTORES OE SETTINGS — Restores factory ride height and delivers a stable, comfortable ride.
• EASY TO INSTALL — Engineered for superior fit and comes with detailed instructions for a complete and trouble-free bolt-on installation
• KEEPS ELECTRONIC SUSPENSION LIGHT OFF — A complete solution to keep the electronic suspension light off

Arnott’s new economical rear air shock replacement for GM vehicles with Autoride suspension will convert the rear of the vehicle from electronic air shocks to passive air shocks. This adjustable shock will keep the vehicle at the proper height and provide a smooth, comfortable ride. This easy-to-install shock includes an Electronic Bypass Module (EBM) to turn off dashboard warning lights, and an instruction manual. Arnott recommends replacing rear shocks in pairs if converting the Autoride suspension to this passive air shock. Not applicable for vehicles w/MagneRide suspension.

Product Features:

• Maintains load leveling
• Turns Off Dashboard Warning Lights
• Installation manual & video available
• Not applicable for vehicles with MagneRide
• NOTE: Zip-tie enclosed resistor to vehicle’s frame
• MUST Replace in Pairs

Convert a vehicle’s factory-equipped air suspension to a conventional suspension with a Monroe® Suspension Conversion Kit. Includes premium components – application-tuned shock/strut, coil spring(s) and hardware.

Product Features:

• PERFECT PAIRING — Purchase Monroe« conversion kit part numbers 90026C1, 90026C2 and 90026C3 for a complete four-corner repair (each part number sold separately)
• CONVERT YOUR RIDE — An alternative to replacing the OE system, this conversion kit converts a factory electronic suspension to a conventional suspension
• COMPLETE SOLUTION — Includes premium-quality replacement components – application-tuned shock/strut, coil spring(s) and necessary mounting hardware
• RESTORES OE SETTINGS — Restores factory ride height and delivers a stable, comfortable ride
• EASY TO INSTALL — Engineered for superior fit and comes with detailed instructions for a complete and trouble-free bolt-on installation
• KEEPS ELECTRONIC SUSPENSION LIGHT OFF — A complete solution to keep the electronic suspension light off

Our Air Command systems give customers the ability to conveniently adjust their air springs with the touch of a button thanks to our Air Command Air Compressor Kits. Our designs provide an instant air source to a vehicle air suspension system, giving users the freedom to adjust their air springs to accommodate different loads and road conditions from both inside and outside of the vehicle.

Product Features:

• The Easy To Read Digital Display Is Designed So You Can See It During The Day, But It Does Not Blind You At Night
• The Wireless Remote Utilizes A New Sleep Cycle And LED Display That Reduces Energy Use And Improves Battery Life
• Easy Installation

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)