Chevrolet Avalanche 1500 Cooling and Climate Controls

Essential Chevrolet Avalanche 1500 Cooling and Climate Controls

Carquest Premium – Multi-Use Connector (Part No.PTA2375)

Multi-Use Connector

from

$36.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Factory Air – System Mounted Pressure Transducer (Part No.20915)

System Mounted Pressure Transducer

from

$44.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • Contains gaskets, O-rings, or seals to properly replace the product
  • Color coded for easy identification
  • Zinc coated to resist corrosion
  • Vehicle specific applications
See More

GM Genuine Parts – Air Conditioning Service Valve (Part No.15-5438)

Air Conditioning Service Valve

from

$7.49
GM Genuine Parts A/C Service Valves are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These spring-loaded valves allow service access to the A/C system. The service valves allow the service technician to evacuate and recharge the refrigerant in the A/C system. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Repairs leaking A/C system
  • Restores A/C function
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Carquest Premium – Standard Rotation Blower Motor Wheel (Part No.35534)

Standard Rotation Blower Motor Wheel

from

$31.49
High quality OE replacement part with all components needed to complete the job.

Product Features:
  • Durable Plastic Material
  • Meets all requirements of international standard ISO 140
  • Suitable for a wide variety of applications
  • Retainer clip installation
  • Durable Plastic Material
  • Meets all requirements of international standard ISO 140
  • Suitable for a wide variety of applications
  • Retainer clip installation
See More

Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26824)

O-Ring & Gasket A/C System Seal Kit

from

$23.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Factory Air.

Product Features:
  • All the seals needed to complete the job
  • Compatible with both R134a and R12 refrigerants
  • Application specific
  • SUV and rear air applications
  • All the seals needed to complete the job
  • Compatible with both R134a and R12 refrigerants
  • Application specific
  • SUV and rear air applications
See More

Mr. Gasket – Water Neck (Part No.2670)

Water Neck

from

$63.99
Mr. Gasket Swivel Water Necks are great for engine conversion applications where engine/radiator inlet and outlet ports may be in different locations versus original equipment. The outlet rotates 360 degrees and has a 30 degree angle for versatility. Die-cast aluminum construction is strong, and durably resisting corrosion and is chrome plated for classic looks. It has a thick mounting flange to prevent warping and provide a positive engine coolant seal. Included stainless steel Allen head cap screws mount flush with the top of the flange to provide a smooth, custom look. Designed for use with 1/2 inch radiator hoses.

Product Features:
  • Neck rotates 360 degrees 30 degree angle for maximum versatility in engine swaps
  • Die-cast aluminum for strength and durability and resist corrosion
  • Thick mounting flange prevents warping and provides a positive coolant seal
  • Chrome-plated for looks
  • Allen head stainless steel bolt mount flush to flange for custom look
  • Uses commonly available 1-1/2 radiator hose (casting I.D 1-3/16″)
See More

Felpro – Engine Water Pump Gasket (Part No.35635)

Engine Water Pump Gasket

from

$7.49
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

GM Genuine Parts – 2-Way Female Black Multi-Purpose Pigtail (Part No.PT731)

2-Way Female Black Multi-Purpose Pigtail

from

$53.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Protective outer coverings help provide long-lasting durability
  • Color-coded wires allow for easy installation
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Driveworks – Ball Bearing (Part No.S-907257)

Ball Bearing

from

$22.49
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Factory Air – Standard Relay (Part No.36010)

Standard Relay

from

$18.05
High quality OE replacement part with all components needed to complete the job

Product Features:
  • Precision engineered
  • OE style molded connectors
  • Quality contacts ensure proper conductivity
  • Vehicle specific applications
See More

GM Genuine Parts – Air Conditioning Compressor (Part No.15-22144)

Air Conditioning Compressor

from

$457.99
GM Genuine Parts A/C Compressors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These compressors pump refrigerant through the system. The compressor is typically engine driven via the accessory belt, and a clutch on the compressor is used to engage and disengage the compressor. Hybrid vehicles are typically equipped with an electric motor driven compressor. The compressor is lubricated by refrigerant oil. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Visual and leak-tested to help ensure the component’s quality and durability
  • The oil separator is part of the compressor and removes oil from the refrigerant to help keep system efficiency
  • GM meets an aggressive engineering requirement for compressor clutch durability and corrosion resistance. Together, these help ensure long-term quality and durability
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

US MOTOR WORKS – Water Pump with Fan Clutch (Part No.MCK1069)

Water Pump with Fan Clutch

from

$177.99
US Motor Works Professional Series Water Pump with Fan Clutch are designed to replace the mechanical components of a cooling system. A proper water pump replacement should include a new fan clutch as the two are connected to the same shaft and work together to move the air and cooling fluid. Replacing one without the other can damage the new part and cause repeat work or engine trouble. This matched set will allow your vehicle continued operation in the demanding environment of today’s engine. All components are brand new and QA inspected for perfect fit and function. Restore your cooling power by installing a US Motor Works Professional Series Water Pump with Fan Clutch.

Product Features:
  • Fan clutch mounts to the water pump and should be replaced at the same time.
  • Matched set for proper water pump or fan clutch replacement
  • Includes mounting hardware, gaskets and accessories as required.
  • Complete mechanical cooling parts replacement
  • Factory tested and 100% new product
  • Meets or exceeds OEM quality
See More

Carquest Premium – Multi-Purpose Relay (Part No.RAA1243)

Multi-Purpose Relay

from

$22.99
Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
  • Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
See More

Carquest Premium – A/C Condenser (Part No.2317)

A/C Condenser

from

$183.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:
  • This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system.
  • The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
  • Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
  • Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
  • Our condensers are manufactured from rigid design standards to fit OEM dimensions.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
  • Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges.
See More

ACDelco – Water Pump Kit (Part No.252-845)

Water Pump Kit

from

$309.99
An ACDelco Professional, premium aftermarket Engine Water Pump circulates coolant through your vehicle’s radiator and engine system to help maintain proper engine temperature and performance. The gaskets, seals, and O-rings packaged with this Professional, premium aftermarket water pump help guarantee that all necessary parts are available for trouble-free installation. ACDelco Professional Water Pumps are a high quality replacement for many vehicles on the road today. This premium aftermarket replacement engine water pump is manufactured to meet your expectations for fit, form, and function.

Product Features:
  • All Makes water pumps fit GM vehicles as well as a wide range of non-GM vehicles
  • Thoroughly tested for reliable, leak-free performance
  • Coated seals support seal longevity and durability
  • Heat-treated shaft assemblies provide superior strength and durability over non-treated assemblies
  • High-quality bearings are permanently sealed and lubricated for greater durability and long life
  • Come with premium, high-quality replacement components needed for trouble-free and accurate installation
  • Uniform wall sections and smooth coolant-flow cavities for efficient operation
  • Cast-iron or aluminum design, depending on vehicle application
See More

GM Genuine Parts – Heating and Air Conditioning Panel Mode Door Actuator (Part No.15-73620)

Heating and Air Conditioning Panel Mode Door Actuator

from

$78.99
ACDelco GM Original Equipment HVAC Mode Door Actuators are electric motors attached to the HVAC housing that move or actuate the mode doors or flaps, directing the airflow to the desired outlet vents. These original equipment HVAC mode door actuators are GM-recommended replacements for your vehicle’s original components and have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Corrects mode door malfunction caused by a failed actuator
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

National – Multi-Purpose Bearing (Part No.907257)

Multi-Purpose Bearing

from

$48.99
Product Features:
  • BUILT TO LAST: Advanced heat treatment process for strength
  • PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
  • RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
  • COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
  • RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
See More

Carquest Premium – A/C Accumulator (Part No.T83208)

A/C Accumulator

from

$59.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:
  • All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators and receiver driers are helium leak tested prior to packaging.
  • O-Rings necessary for installation are included.
See More

Carquest Premium – A/C Compressor Cut-Out Switch (Part No.ACA1256)

A/C Compressor Cut-Out Switch

from

$20.79
Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The HVAC Pressure Sensor/Switch monitors the refrigerant pressure within the air conditioning system, ensuring optimal performance and preventing potential system damage, which enhances climate control and passenger comfort. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:
  • Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
  • Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
  • Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
  • Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.
See More

Carquest Premium – A/C Suction Line Hose Assembly (Part No.T56776)

A/C Suction Line Hose Assembly

from

$57.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related A/C components.
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
See More

Carquest – Multi-Purpose Relay (Part No.83A1008)

Multi-Purpose Relay

from

$18.99
Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • Computer-Aided Design (CAD), laser scanning and 3D printing ¿ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ¿ in the part design process ensures speed-to-market and a precise fit guaranteed.
  • Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the part design process ensures speed-to-market and a precise fit guaranteed.
  • Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
  • Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
See More

KAI – A/C Compressor (Part No.ACP010581)

A/C Compressor

from

$364.99
New Standard Replacement A/C Compressor, H6, 4 Groove, V8 Engine

Product Features:
  • H6, 4 Groove, V8 Engine
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

GM Genuine Parts – Gray Multi-Purpose Pigtail (Part No.PT3923)

Gray Multi-Purpose Pigtail

from

$46.49
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Protective outer coverings help provide long-lasting durability
  • Color-coded wires allow for easy installation
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – A/C Automatic Adjusting Orifice Tube (Part No.T38905)

A/C Automatic Adjusting Orifice Tube

from

$41.99
Carquest Orifice Tubes are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each orifice tube is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • O-Rings necessary for installation are included.
  • O-Rings necessary for installation are included.
See More

Carquest Premium – Radiator Cap Tester Adapter (Part No.12033)

Radiator Cap Tester Adapter

from

$95.99
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:
  • Machined metal construction
  • Works with MT-300 pressure tester
  • Tests coolant caps
  • Professional quality
See More

Chevrolet Avalanche 1500 Cooling and Climate Controls Categories

Helping You Find the Right Cooling and Climate Controls for Your Chevrolet Avalanche 1500

You love your Avalanche 1500. So we’ve made it easier than ever to help you find Chevrolet Avalanche 1500 Cooling and Climate Controls in our online catalog. Our inventory holds 228 aftermarket and OEM Cooling and Climate Controls for your Chevrolet Avalanche 1500, ranging from $1.49 to $612.99.

We offer parts from 22 brands trusted to make quality Cooling and Climate Controls for your Chevrolet Avalanche 1500. Before you buy, take some time to read through customer reviews. We currently have 56,275 reviews of Chevrolet Avalanche 1500 Cooling and Climate Controls from previous customers. Some of the top rated parts include Engine Cooling Fan Clutch: Reverse Rotation Severe Duty Thermal Clutch with 4.4 stars and A/C Dark Grey Porous Orifice Tube with 4.7 stars.

Find your Avalanche 1500 Cooling and Climate Controls here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Chevrolet Avalanche 1500 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Cooling and Climate Controls Brands for Your Chevrolet Avalanche 1500

Our inventory holds Cooling and Climate Controls for your Chevrolet Avalanche 1500 from 22 trusted brands. You’ll find OEM and aftermarket parts from brands like Carquest Premium, DriveWorks, and Dorman, all of which can keep that Chevrolet happy.
We have ACDelco parts available for your Chevrolet Avalanche 1500 in categories like Air Conditioning Parts and Engine Cooling Parts. Some of the top-rated ACDelco parts in these categories are:
Multi-Purpose Relay
from $28.99
(1)
Multi-Purpose Relay
Air Conditioning Relays
Engine Coolant Temperature Sensor
from $38.99
(1)
Engine Coolant Temperature Sensor
Coolant Temperature Sensors

Top-Rated Carquest Premium Cooling and Climate Controls

Leading Carquest Premium Cooling and Climate Controls

We carry Carquest Premium brand parts for your Chevrolet Avalanche 1500 across several catalog categories, including Engine Cooling Parts. Some of our most reviewed Carquest Premium parts include:
Engine Water Pump: New, Gasket/Seals Included
from $151.99
(371)
Engine Water Pump: New, Gasket/Seals Included
Water Pumps
Standard Thermostat: With Seal, 187 Degrees
from $17.99
(189)
Standard Thermostat: With Seal, 187 Degrees
Thermostats
Integrated Thermostat Housing: With Seal, 187 Degrees
from $21.99
(173)
Integrated Thermostat Housing: With Seal, 187 Degrees
Thermostat and Water Outlet Assemblies

FAQs for Chevrolet Avalanche 1500 Cooling and Climate Controls

What are the most purchased Cooling and Climate Controls for the Chevrolet Avalanche 1500?

Out of 228 Cooling and Climate Controls for the Chevrolet Avalanche 1500, the most popular in our inventory are:
Engine Water Pump
from $104.99
(345)
Engine Water Pump
Water Pumps
Radiator: With Transmission Oil Cooler
from $311.99
(95)
Radiator: With Transmission Oil Cooler
Radiators
Engine Water Pump Gasket
from $7.49
(100)
Engine Water Pump Gasket
Water Pump Gaskets

What are the top-rated Chevrolet Avalanche 1500 Cooling and Climate Controls?

Top-rated Cooling and Climate Controls for your Chevrolet Avalanche 1500 based on customer reviews/ratings are:
A/C Dark Grey Porous Orifice Tube
from $19.99
(97)
A/C Dark Grey Porous Orifice Tube
“worked great”
Blower Motor: with Wheel
from $103.99
(78)
Blower Motor: with Wheel
“It worked. Fit properly, had the right plug. Bottom line, my heat works again. 2005 Chevy Silverado”