Chevrolet Astro Brake Rotors and Drums

The ACDelco GM Original Equipment Brake Backing Plate is a high quality GM-recommended replacement for your vehicle’s original components. Within the braking system the wheel cylinder is mounted to these brake plates and they serve as the foundation for the brake shoes and other drum brake components. These original equipment brake backing plates have been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured with GM Original Equipment specification for fit, form, and function

The original brake dust shield on certain Cadillac, Chevrolet and GMC vehicles requires removing the entire axle shaft to replace. This Dorman OE FIX shield has a two-piece design to simplify replacement.

Product Features:

• Time-saving design – the unique split dust shield design reduces install time an average of an hour per shield.
• Longer service life – corrosion-resistant steel construction protects brakes from elements and debris.
• Precision-engineered – undergone dimensional verification and salt spray testing to ensure this part conforms to product standards and quality
• Trustworthy quality – engineered and inspected in the United States

The original brake dust shield on certain Cadillac, Chevrolet and GMC vehicles requires removing the entire axle shaft to replace. This Dorman OE FIX shield has a two-piece design to simplify replacement.

Product Features:

• Time-saving design – the unique split dust shield design reduces install time an average of an hour per shield.
• Longer service life – corrosion-resistant steel construction protects brakes from elements and debris.
• Precision-engineered – has undergone dimensional verification and salt spray testing to ensure this part conforms to product standards and quality
• Trustworthy quality – engineered and inspected in the United States

Brakes are designed as a system and all the parts need to work together for best performance. The Dust Hole Cover covers the brake adjustment slot from debris to keep your brakes running smoothly.

Product Features:

• Keeps out dirt and debris
• Direct replacement for a proper fit
• OE Fit and Function
• Maintains proper seal

Hardware consists of a variety of parts designed to assist in restoring your brake system such as, Anti-rattle clips, seals, pins, and dust boots along with drum shoe return springs, hold down springs, and adjuster assemblies, help to maintain consistent, balanced braking. Change your hardware with the brake shoes to ensure maximum performance.

Product Features:

• Manufactured to restrain high tolerances with quality materials
• Increases the Life Span and Improves the Performance of the Drum Brakes
• Coated to eliminate heat and corrosion deterioration
• Restores brakes to like-new performance
• This part matches Original Equipment (OE) quality specifications

This parking brake strut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this parking brake strut blade is designed to match the fit and function of the original part on specified vehicles.
• Ideal solution – this strut is a reliable replacement for an original part that is missing or damaged
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Carquest Platinum Plus coated rotors are built to meet or exceed original equipment specifications delivering superior stopping power. Carquest Platinum Plus coated rotors have a specially engineered coating that penetrates vanes and prevents rust, corrosion and build up. This zinc and aluminum coating maintains a like-new appearance significantly longer than a standard rotor. Carquest Platinum Plus coated rotors are designed to effectively dissipate heat helping to eliminate brake fade and increase the life of your pads and rotors. These rotors are built for quiet, long-lasting performance.Tech Tip: Burnish the pads to the rotor by applying the 30/30/30 rule: 30 stops from 30 mph with 30 seconds of cool down between stops.

Product Features:

• Engineered to withstand 120 hours of salt spray testing
• Zinc and aluminum anti-corrosion coating maintains a like-new appearance
• Manufactured to exacting quality and dimensional specifications for superior stopping power
• Exceeds ISO manufacturing guidelines (International Organization for Standardization)
• OE configuration to dissipate heat, increasing pad life
• Proper harmonic design helps to reduce brake noise
• Brand may vary by location

WBR Run True Technology Metallurgic-Gray (MG) Finished Rotors All World Brake Resources (WBR) brake rotors with Run-True technology are manufactured to match the exact OE fit, OE construction, and precision finishing to ensure quick and easy installation, as well as trouble-free functionality for the life of the rotor. The Metallurgic-Gray coating is applied to all outward non-friction surfaces including in the gap between the plates covering the cooling vanes and cured through an oven drying process. The Gray coating provides an effective anti-rust protection to help maintain a clean appearance. The coating used for WBR is also similar to the OE color used by many OE car makes. WBR Brake Rotors with Run-True Technology have ultra tight tolerances that provide the finest braking experience, from break in throughout the life of the rotor, reducing the chance of warping even under extreme braking temperatures. The coated brake disc provides a protective water based coating that prevents rust and corrosion, extended rotor life and improved visual appearance. WBR Brake Rotors are manufactured to meet or exceed the original equipment manufacturer specification for durability, fit, and function.

Product Features:

• High metallurgical and machining standard to improve stopping distances
• Produced to match OE design fitment – G 3000 gray iron
• Mill balanced
• TS16949 certified
• Non-directional finish provides smooth vibration free performance
• No need for machining prior to installation
• Durable Metallurgic-Gray finish to all outward non-friction surfaces
• Metallurgic-Gray anti-rust protection to help maintain a clean appearance
• Compatible with NAO, Ceramic and Semi-Met pad compounds for reduced noise
• Designed to minimize brake fade and extend pad and rotor life
• 24/24 Warranty – limited warranty against defects in material and workmanship Technical Service Bulletins

Carquest Frontline brake rotors are manufactured to withstand severe-duty use, making them the ideal choice for police, emergency vehicles, fleet and severe duty applications. Machined, balanced and with more carbon content, Frontline severe-duty castings meet or exceed original equipment specifications, delivering better stopping power, superior heat dissipation, and high tensile strength. Carquest Frontline rotors are fully coated to protect against corrosion and rust build-up, which can shorten rotor life. These rotors are the preferred choice when looking for the best performance on severe-duty applications.Tech Tip: Burnish the pads to the rotor by applying the 30/30/30 rule: 30 stops from 30 mph with 30 seconds of cool down between stops.

Product Features:

• Designed for severe duty performance
• Coating promotes unrestricted heat venting by preventing rust and corrosion build-up
• Manufactured to exact quality and dimensional specifications for superior stopping power
• Exceeds ISO manufacturing guidelines (International Organization for Standardization)
• Optimal metallurgy and casting thickness to preventing warping
• OE vane configuration to dissipate heat and increase pad life
• Proper harmonic design helps to reduce brake noise

Optimally engineered: ATE PremiumOne Disc Brake Rotors During heavy acceleration, a driver has to depend on bringing the vehicle to a safe stop in critical situations. Achieving maximum braking performance is guaranteed by the ATE PremiumOne Disc Brake Rotors. Its multifunctional infinite loop groove diverts gasses and dirt which could reduce braking performance. Fading is avoided and the life of the brake disc is extended. Water, dirt and the gases generated during braking can greatly reduce the braking performance of your vehicle. The ATE PremiumOne Disc’s continuous groove diverts these elements. The advantages are: better braking response and the cleaning effect of the continuous groove ensures score free, even wear which increases durability. Patented RotorLife wear indicator – Helps technicians and vehicle owners gauge rotor thickness at a glance, and notice when they are due for replacement. The wear indicator’s interlaced elliptical grooves are machined into the rotor face at complimentary angles. Groove design enhances dissipation of heat and gases to reduce brake fade, extend pad life, and looks great with cast spoke wheels. The MetaCote protective coating formulation is cured at approximately 572F. No grease or oil to remove. Helps protect against road salt, brake fluid and other corrosives – sheds water and dirt for clean appearance behind cast spoke wheels. Reduction in overall installation time. Application specific design is engineered to tighter tolerances than rotors that take a one size fits all approach. Fits and performs like or better than the original equipment it replaces – provides added value and convenience for brake technicians and their customers. No machining needed.

Product Features:

• Minimal fading. Maximum braking performance due to the revolutionary multifunctional groove
• Minimal scoring, even under high stress
• Longer service life
• Meta Cote anti-corrosion protection
• Safe braking on wet pavement
• Shorter installation time. No pre-cleaning needed
• Wear detection at a glance. No disassembly or measuring required
• Sporty look, especially with open wheels

ACDelco GM Original Equipment Disc Brake Rotors are metal discs mounted to the wheel hub where the caliper can press the brake pads against the disc surfaces to slow the vehicle, and are GM-recommended replacements for your vehicle’s original components. These disc brake rotors are manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Inspected for balance, resulting in smooth brake operation and noise reduction
• Rust-preventive coating to help protect against corrosion
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

Carquest Platinum painted brake rotors meet or exceed original equipment (O.E.) specifications, delivering superior stopping power with proper harmonic design and non-directional finish that eliminate noise. Carquest Platinum painted rotors feature RotorShield, a rust-inhibiting barrier that provides up to 5 times more protection than non-painted rotors. The RotorShield barrier is applied to the rotor hat to protect from unsightly rust and help maintain a like-new appearance. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of the pads and rotors. Carquest Platinum painted brake rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:

• Engineered to withstand 120 hours of salt spray testing
• Meets or exceeds OE design for superior stopping power
• Exceeds ISO manufacturing guidelines (International Organization for Standardization)
• Matches OE vane size for proper cooling
• Optimal metallurgy and casting thickness to preventing warping
• Air gap eliminates brake fade and increases pad life
• Non-directional finish decreases break-in time

Carquest Premium brake drums meet or exceed original equipment specifications while delivering superior stopping power. Carquest Premium drums are manufactured with proper harmonic design and balancing to help eliminate noise and vibration. Our drums are manufactured to the original dimensional specifications for proper fit and performance. Carquest Premium brake drums are designed for long-lasting and quiet braking with superior performance.

Product Features:

• Meets or exceeds OE design for superior stopping power
• Exceeds ISO manufacturing guidelines (International Organization for Standardization)
• Proper harmonic design and balance helps to reduce brake noise and vibration
• Optimal metallurgy and casting thickness to preventing warping

ACDelco Professional DuraStop Brakes are the most thoroughly, independently tested brakes on the aftermarket and are designed to help resist corrosion and premature wear. ACDelco submits its brake products through a range of test methods, including D3EA®, along with Noise/Vibration/Harshness (NVH) and durability/wear testing. This allows us to deliver the high-quality product that an ACDelco customer expects. No manufacturer tests or audits its replacement brake products to the level of ACDelco. Dual Dynamometer Differential Effectiveness Analysis (D3EA®) and SAE J2784.

Product Features:

• No machining required – ready to be installed right out of the box
• Rust-preventative coating
• Non-directional brake surface finish for consistent braking
• Chamfer angle follows the OE design
• (D3EA®) and SAE J2784 testes and approved
• Noise/Vibration/Harshness (NVH) and durability/wear tested

Carquest Wearever Hub And Rotors are designed to meet or exceed original equipment design delivering superior stopping power. Proper harmonic design And non-directional finish that eliminates noise And enhances pedal feel. Carquest Wearever Hub And Rotors are designed to dissipate heat helping to eliminate brake fade And increase the life of your pads. Ready to install out of the box to save you time.

Product Features:

• Meets or exceeds OE design for superior stopping power
• Exceeds ISO manufacturing guidelines (International Organization for Standardization)
• Matches OE vane size for proper cooling
• Optimal metallurgy and casting thickness to prevent warping
• Air gap eliminates brake fade and increases pad life
• Non-Directional finish decreases break-in time

Carquest Premium painted brake rotors meet or exceed original equipment (O.E.) specifications, delivering superior stopping power with proper harmonic design and non-directional finish that eliminate noise. Carquest Premium painted rotors feature RotorShield, a rust-inhibiting barrier that provides up to 5 times more protection than non-painted rotors. The RotorShield barrier is applied to the rotor hat to protect from unsightly rust and help maintain a like-new appearance. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of the pads and rotors. Carquest Premium painted brake rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:

• Engineered to withstand 120 hours of salt spray testing
• Meets or exceeds OE design for superior stopping power
• Exceeds ISO manufacturing guidelines (International Organization for Standardization)
• Matches OE vane size for proper cooling
• Optimal metallurgy and casting thickness to preventing warping
• Air gap eliminates brake fade and increases pad life
• Non-directional finish decreases break-in time

WBR Run True Technology Metallurgic-Gray (MG) Finished Rotors All World Brake Resources (WBR) brake rotors with Run-True technology are manufactured to match the exact OE fit, OE construction, and precision finishing to ensure quick and easy installation, as well as trouble-free functionality for the life of the rotor. The Metallurgic-Gray coating is applied to all outward non-friction surfaces including in the gap between the plates covering the cooling vanes and cured through an oven drying process. The Gray coating provides an effective anti-rust protection to help maintain a clean appearance. The coating used for WBR is also similar to the OE color used by many OE car makes. WBR Brake Rotors with Run-True Technology have ultra tight tolerances that provide the finest braking experience, from break in throughout the life of the rotor, reducing the chance of warping even under extreme braking temperatures. The coated brake disc provides a protective water based coating that prevents rust and corrosion, extended rotor life and improved visual appearance. WBR Brake Rotors are manufactured to meet or exceed the original equipment manufacturer specification for durability, fit, and function.

Product Features:

• High metallurgical and machining standard to improve stopping distances
• Produced to match OE design fitment – G 3000 gray iron
• Mill balanced
• TS16949 certified
• Non-directional finish provides smooth vibration free performance
• No need for machining prior to installation
• Durable Metallurgic-Gray finish to all outward non-friction surfaces
• Metallurgic-Gray anti-rust protection to help maintain a clean appearance
• Compatible with NAO, Ceramic and Semi-Met pad compounds for reduced noise
• Designed to minimize brake fade and extend pad and rotor life
• 24/24 Warranty – limited warranty against defects in material and workmanship Technical Service Bulletins

ACDelco Professional DuraStop Brakes are the most thoroughly, independently tested brakes on the aftermarket and are designed to help resist corrosion and premature wear. ACDelco submits its brake products through a range of test methods, including D3EA®, along with Noise/Vibration/Harshness (NVH) and durability/wear testing. This allows us to deliver the high-quality product that an ACDelco customer expects. No manufacturer tests or audits its replacement brake products to the level of ACDelco. Dual Dynamometer Differential Effectiveness Analysis (D3EA®) and SAE J2784.

Product Features:

• No machining required – ready to be installed right out of the box
• Rust-preventative coating
• Mill-balanced for proper rotor function
• Quality validated for proper metallurgy and correct brake plate thickness
• Non-directional brake surface finish for consistent braking
• Chamfer angle follows the OE design
• (D3EA®) and SAE J2784 testes and approved
• Noise/Vibration/Harshness (NVH) and durability/wear tested

Carquest Wearever rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Wearever rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Wearever rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:

• Meets or exceeds OE design for superior stopping power
• Exceeds ISO manufacturing guidelines (International Organization for Standardization)
• Matches OE vane size for proper cooling
• Optimal metallurgy and casting thickness to preventing warping
• Air gap eliminates brake fade and increases pad life
• Non-directional finish decreases break-in time

Carquest Premium rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Premium rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Premium rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:

• Meets or exceeds OE design for superior stopping power
• Exceeds ISO manufacturing guidelines (International Organization for Standardization)
• Matches OE vane size for proper cooling
• Optimal metallurgy and casting thickness to preventing warping
• Air gap eliminates brake fade and increases pad life
• Non-directional finish decreases break-in time.

WBR Run True Technology Metallurgic-Gray (MG) Finished Rotors All World Brake Resources (WBR) brake rotors with Run-True technology are manufactured to match the exact OE fit, OE construction, and precision finishing to ensure quick and easy installation, as well as trouble-free functionality for the life of the rotor. The Metallurgic-Gray coating is applied to all outward non-friction surfaces including in the gap between the plates covering the cooling vanes and cured through an oven drying process. The Gray coating provides an effective anti-rust protection to help maintain a clean appearance. The coating used for WBR is also similar to the OE color used by many OE car makes. WBR Brake Rotors with Run-True Technology have ultra tight tolerances that provide the finest braking experience, from break in throughout the life of the rotor, reducing the chance of warping even under extreme braking temperatures. The coated brake disc provides a protective water based coating that prevents rust and corrosion, extended rotor life and improved visual appearance. WBR Brake Rotors are manufactured to meet or exceed the original equipment manufacturer specification for durability, fit, and function.

Product Features:

• High metallurgical and machining standard to improve stopping distances
• Produced to match OE design fitment – G 3000 gray iron
• Mill balanced
• TS16949 certified
• Non-directional finish provides smooth vibration free performance
• No need for machining prior to installation
• Durable Metallurgic-Gray finish to all outward non-friction surfaces
• Metallurgic-Gray anti-rust protection to help maintain a clean appearance
• Compatible with NAO, Ceramic and Semi-Met pad compounds for reduced noise
• Designed to minimize brake fade and extend pad and rotor life
• 24/24 Warranty – limited warranty against defects in material and workmanship Technical Service Bulletins

ACDelco Advantage brake rotors and drums feature the fit, form and function of premium aftermarket brakes at a more economical price. The ACDelco Advantage line offers dependability, performance and great value – without sacrificing important features and benefits.

Product Features:

• No machining required – ready to be installed right out of the box
• Rust-preventative coating
• Mill-balanced for proper rotor function
• Quality validated for proper metallurgy and correct brake plate thickness
• Non-directional brake surface finish for consistent braking
• Chamfer angle follows the OE design

Carquest Wearever rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Wearever rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Wearever rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:

• Meets or exceeds OE design for superior stopping power
• Exceeds ISO manufacturing guidelines (International Organization for Standardization)
• Matches OE vane size for proper cooling
• Optimal metallurgy and casting thickness to preventing warping
• Air gap eliminates brake fade and increases pad life
• Non-directional finish decreases break-in time

Carquest Frontline brake rotors are manufactured to withstand severe-duty use, making them the ideal choice for police, emergency vehicles, fleet and severe duty applications. Machined, balanced and with more carbon content, Frontline severe-duty castings meet or exceed original equipment specifications, delivering better stopping power, superior heat dissipation, and high tensile strength. Carquest Frontline rotors are fully coated to protect against corrosion and rust build-up, which can shorten rotor life. These rotors are the preferred choice when looking for the best performance on severe-duty applications.Tech Tip: Burnish the pads to the rotor by applying the 30/30/30 rule: 30 stops from 30 mph with 30 seconds of cool down between stops.

Product Features:

• Designed for severe duty performance
• Coating promotes unrestricted heat venting by preventing rust and corrosion build-up
• Manufactured to exact quality and dimensional specifications for superior stopping power
• Exceeds ISO manufacturing guidelines (International Organization for Standardization)
• Optimal metallurgy and casting thickness to preventing warping
• OE vane configuration to dissipate heat and increase pad life
• Proper harmonic design helps to reduce brake noise

WBR Run True Technology Metallurgic-Gray (MG) Finished Rotors All World Brake Resources (WBR) brake rotors with Run-True technology are manufactured to match the exact OE fit, OE construction, and precision finishing to ensure quick and easy installation, as well as trouble-free functionality for the life of the rotor. The Metallurgic-Gray coating is applied to all outward non-friction surfaces including in the gap between the plates covering the cooling vanes and cured through an oven drying process. The Gray coating provides an effective anti-rust protection to help maintain a clean appearance. The coating used for WBR is also similar to the OE color used by many OE car makes. WBR Brake Rotors with Run-True Technology have ultra tight tolerances that provide the finest braking experience, from break in throughout the life of the rotor, reducing the chance of warping even under extreme braking temperatures. The coated brake disc provides a protective water based coating that prevents rust and corrosion, extended rotor life and improved visual appearance. WBR Brake Rotors are manufactured to meet or exceed the original equipment manufacturer specification for durability, fit, and function.

Product Features:

• High metallurgical and machining standard to improve stopping distances
• Produced to match OE design fitment – G 3000 gray iron
• Mill balanced
• TS16949 certified
• Non-directional finish provides smooth vibration free performance
• No need for machining prior to installation
• Durable Metallurgic-Gray finish to all outward non-friction surfaces
• Metallurgic-Gray anti-rust protection to help maintain a clean appearance
• Compatible with NAO, Ceramic and Semi-Met pad compounds for reduced noise
• Designed to minimize brake fade and extend pad and rotor life