Chevrolet 3D Air Intakes
Top Chevrolet 3D Air Intakes Categories
We carry over 34 Air Intakes in inventory for the Chevrolet 3D. If you’re looking for aftermarket Air Intakes for your Chevrolet 3D, check out all these categories:
Essential Chevrolet 3D Air Intakes
Holley – Performance and Race Carburetor: 500 CFM, No Choke, 2 Barrel, 2300 Bore, Single Inlet (Part No.0-4412CT)
from
$649.99
Competition fuel curves provide safe and reliable horsepower for high performance race engines.
Product Features:
See More
Product Features:
- Gold Dichromate Finish For Corrosion Resistance w/Classic Look
- Man. Choke Cable Hand Controlled For Cold Start Control
- 50CC Accelerator Pump For Add. Fuel Under Initial Acceleration
- Power Valve Blow-Out Protection
- 100% Wet-Flow Tested To Assure It Arrives Ready To Run
Holley – Street Carburetor: 500 CFM, Manual Choke, 2 Barrel, 2300 Bore, Single Inlet, Shiny (Part No.0-4412S)
from
$534.99
The 0-4412 is designed as a stock replacement for 2BBL street applications as well as being mandated for some oval track racing sanctioning bodies. Whether you are looking for a replacement carburetor to replace your tired and worn factory 2BBL or one to push you to the finish line on Saturday night, the Holley 0-4412 Performance 2BBL is the perfect choice.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Man. Choke Cable Hand Controlled For Cold Start Control
- 50CC Accelerator Pump For Add. Fuel Under Initial Acceleration
- Power Valve Blow-Out Protection
- 100% Wet-Flow Tested To Assure It Arrives Ready To Run
Holley – Street Carburetor: 500 CFM, Manual Choke, 2 Barrel, 2300 Bore, Single Inlet, Gold Dichromate (Part No.0-4412C)
from
$649.99
The 0-4412 is designed as a stock replacement for 2BBL street applications as well as being mandated for some oval track racing sanctioning bodies. Whether you are looking for a replacement carburetor to replace your tired and worn factory 2BBL or one to
Product Features:
See More
Product Features:
- Gold Dichromate Finish For Corrosion Resistance w/Classic Look
- Man. Choke Cable Hand Controlled For Cold Start Control
- 50CC Accelerator Pump For Add. Fuel Under Initial Acceleration
- Power Valve Blow-Out Protection
- 100% Wet-Flow Tested To Assure It Arrives Ready To Run
- Does Not Work w/A.O.D. Transmissions
- Installation/Tuning DVD Incl.
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 9617)
from
$20.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Validated for fit, form, and function
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
KAI – Carb Choke Cable (Part No.GMK4141523554)
from
$27.99
New Goodmark Choke Cable With Black Knob
Product Features:
See More
Product Features:
- With Black Knob
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Carb Choke Cable (Part No.GMK4141523555)
from
$33.99
New Goodmark Choke Cable With Chrome Knob
Product Features:
See More
Product Features:
- With Chrome Knob
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Felpro – Carburetor Mounting Gasket (Part No.9288)
from
$1.99
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Edelbrock – Pro-Flo XT Small Block Chevy EFI Black Intake Manifold (Part No.71373)
from
$746.99
Edelbrock part #71373 Pro-Flo XT intake manifold is designed for 1957-86 small-block Chevy V8 applications. The Pro-Flo XT intakes are engineered with a large plenum and long tapered runners to deliver maximum horsepower and broad torque throughout the rp
Product Features:
See More
Product Features:
- 1500-7000 RPM Range
- Single Plane Type-Throttle Body XT Style Flange
- 9 in. Front Height, 9 in. Center Height, 8.2 in. Rear Height
- Black Powder Coated Finish
- Made In The USA
Edelbrock – Performer RPM AIR-Gap Small Block Chevy Polished Intake Manifold (Part No.75011)
from
$749.99
Based on performer RPM-series with unique air gap. Air gap cooler and denser mixture for more power. Designed for 1500 to 6500 RPM. Dual-plane high-rise intake. For square bore carburetors only. For street and high performance use. Available in cast, polished or endurashine finish.
Product Features:
See More
Product Features:
- Polished Version Of Edelbrock PN[7501]
- Polish is Hand-Buffed for Brilliant Shine
- Based on Performer RPM-Series with Unique Air Gap
- Air Gap Cooler and Denser Mixture for More Power
- Designed for 1500 to 6500 RPM Street-Driven Power
- Produces Incredible Top-End Horsepower
- Retains Good Throttle Response and Acceleration
- Larger Plenum and Runners Maximizes Other Upgrades
Edelbrock – Performer Intake Manifold Small-Block Chevy (Part No.3706)
from
$401.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 Deg Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
- Accepts Late-Model Choke; Waterneck; and HEI
- Accepts A/C And Alternator
- Accepts Exhaust Heated Chokes and Accepts EGR
Edelbrock – C-357-B Triple-Deuce Manifold for S/B Chevy 4-Bolt Carb Pattern (Part No.5419)
from
$497.99
Product Features:
See More
- Designed for Idle to 5500 RPM
- Manifold has a Balanced 180+ Firing Order
- Contains Exhaust Gas Heat Riser
- Offers Excellent Performance Potential
- Front Oil Filler Tube Boss Included
- Carburetor Center-to-Center Dimensions = 5-1/2 in
- Also Available Polished PN[5419] But Not Fit HEI
- Use Rochester 2GC (small 1-7/16 in bore)
ARP Auto Racing – For Use With Chevy 265/ 400 Cubic", 12 Point Head Type, Polished, With Washers (Part No.434-2101)
from
$60.99
Prevent intake manifold leaks with ARP quality fasteners. They are rated at 170,000 PSI and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load distribution. Precision rolled threads prevent galling while promoting more consistent torque loading. Facilitates optimum sealing of gasket surfaces. Available in choice of black oxide finish chrome moly or corrosion resistant stainless steel, as well as hex or 12 point heads.
Product Features:
See More
Product Features:
- Nominally Rated At 170,000 PSI Tensile Strength
- Precision Machined Threads For Secure Engagement, And Would not Rust
- Wide Under Head Flange And Companion Washers Provide Even Load Distribution
- Precision Rolled Threads Prevent Galling While Promoting More Consistent Torque Loading
- Facilitates Optimum Sealing Of Gasket Surfaces
ARP Auto Racing – For Use With Chevy 265/ 400 Cubic", Hex Style Head Type, Polished, Ss (Part No.434-2001)
from
$56.99
Prevent intake manifold leaks with ARP quality fasteners. They are rated at 170,000 PSI and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load distribution. Precision rolled threads prevent galling while promoting more consistent torque loading. Facilitates optimum sealing of gasket surfaces. Available in choice of black oxide finish chrome moly or corrosion resistant stainless steel, as well as hex or 12 point heads.
Product Features:
See More
Product Features:
- Nominally Rated At 170,000 PSI Tensile Strength
- Precision Machined Threads For Secure Engagement, And Would not Rust
- Wide Under Head Flange And Companion Washers Provide Even Load Distribution
- Precision Rolled Threads Prevent Galling While Promoting More Consistent Torque Loading
- Facilitates Optimum Sealing Of Gasket Surfaces
- 1″ Long
Mr. Gasket – Intake Manifold Bolts (Part No.955G)
from
$17.99
These grade 5 socket head bolts are zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8-16 x 1 inch bolts & washers.
Product Features:
See More
Product Features:
- Grade 5 socket head bolts are zinc plated for protection and appearance
- Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds
- Washers Included
Mr. Gasket – Intake Bolt Kit (Part No.5003)
from
$87.99
Finish your custom engine job with these show quality grade 5 chromed 12-point bolts, includes AN washers which have no exposed shoulder for a professional appearance. Includes (12) 3/8-16 x 1 inch bolts with (12) 3/8 inch AN washers.
Product Features:
See More
Product Features:
- Chrome plated
- Grade 8
- 12-point head
- AN washers with no exposed shoulder for a professional appearance
Dorman – Help – Rubber Expansion Plug 1-5/8 In. – Size Range 1-5/8 In. – 1-3/4 In. (Part No.10232)
from
$5.99
Our Engine Intake Manifold Expansion Plug is conveniently designed as a direct replacement for stripped plugs. A proper fit is ensured, every time.
Product Features:
See More
Product Features:
- Manufactured from high quality materials for a long service life
- Torque values listed on parts (where applicable)
- Easy to install
- Constructed to strict engineering quality standards
Edelbrock – Chevrolet SB Performer EPS Manifold w/ Gaskets, Bolts, Studs (Part No.2040)
from
$299.99
Edelbrock part #2040 Manifold Installation kit will simplify the process of adding more power and efficiency to your street rod or muscle car. It combines all the necessary components to replace your stock iron intake manifold with an Edelbrock aluminum i
See More
Chevrolet 3D Air Intakes Categories
Helping You Find the Right Air Intakes for Your Chevrolet 3D
You love your 3D. So we’ve made it easier than ever to help you find Chevrolet 3D Air Intakes in our online catalog. Our inventory holds 34 aftermarket and OEM Air Intakes for your Chevrolet 3D, ranging from $1.99 to $1,865.99.
We offer parts from 8 brands trusted to make quality Air Intakes for your Chevrolet 3D. Before you buy, take some time to read through customer reviews. We currently have 21 reviews of Chevrolet 3D Air Intakes from previous customers. Some of the top rated parts include Rubber Expansion Plug 1-5/8 In. – Size Range 1-5/8 In. – 1-3/4 In. with 3.0 stars.
Find your 3D Air Intakes here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Chevrolet 3D part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Air Intakes Brands for Your Chevrolet 3D
Our inventory holds Air Intakes for your Chevrolet 3D from 8 trusted brands. You’ll find OEM and aftermarket parts from brands like Mr. Gasket, FELPRO, and Edelbrock, all of which can keep that Chevrolet happy.
We have Edelbrock parts available for your Chevrolet 3D in categories like Intake Manifold Parts. Some of the top-rated Edelbrock parts in these categories are:
Top-Rated Mr. Gasket Air Intakes
Leading Mr. Gasket Air Intakes
We carry Mr. Gasket brand parts for your Chevrolet 3D across several catalog categories, including Intake Manifold Parts. Some of our most reviewed Mr. Gasket parts include:
FAQs for Chevrolet 3D Air Intakes
What are the most purchased Air Intakes for the Chevrolet 3D?
Out of 34 Air Intakes for the Chevrolet 3D, the most popular in our inventory are:
from
$1.99
This product is not rated
Carburetor Mounting Gasket
Carburetor and Injector Mount Gaskets
from
$374.99
This product is not rated
Performer RPM Small Block Chevy AIR-Gap Intake Manifold
Intake Manifolds
What are the top-rated Chevrolet 3D Air Intakes?
Top-rated Air Intakes for your Chevrolet 3D based on customer reviews/ratings are:
from
$5.99
(1)
Rubber Expansion Plug 1-5/8 In. – Size Range 1-5/8 In. – 1-3/4 In.
“You will still have to take the engine apart”
