Checker A11E Ignition and Tune-Up Products

Essential Checker A11E Ignition and Tune-Up Products

E3 – DiamondFIRE Automotive Spark Plug: More Power, Saves Gas (Part No.E3.42)

DiamondFIRE Automotive Spark Plug: More Power, Saves Gas

from

$7.49
The Spark Plugs are the product of years of fundamental research in the combustion field. The unique patented electrode configuration of these new The spark plugs increases the amount of combustion pressure created during each power stroke of an engine, which results in a marked increase in power output, fuel economy, and reduced emissions in all gasoline engines. E3.42 is a 14mm, 0.460 reach plug with a taper seat. It fits domestic applications in the 80s to early 90s, and is widely stocked in automotive retail stores. The automotive plugs have three legs securing the Diamond FIRE electrode to the shell. This allows for excellent heat transfer, and helps to create more turbulence in the cylinder. The patented Diamond FIRE side wire is proven to increase power, reduce fuel consumption and improve hydrocarbon emissions in long-term use.

Product Features:
  • E3’s Diamond Fire edge to edge ground electrode provides maximum performance with increased efficiency and a faster more complete burn.
  • Smoother Acceleration & Idle – The faster flame initiated by the The spark plug results in a more complete burn of the ingested fuel charge. More pressure is created against the piston more fuel is put to work
  • Energy – Power output improved up to 6% on average in the typical operating ranges. Results will vary.
  • Efficiency – The “diamond shaped” side wire electrode projects the combustion spark in a way that more quickly ignites the air/fuel mixture, thereby creating a significantly faster and larger flame kernel. The result is that more fuel is put to work durin
  • E3’s patented Diamond Fire Technology provides a cleaner burning combustion, which translates into fuel savings and reduced engine carbon deposits
  • The Spark Plugs are pre-gapped at the factory and cannot be adjusted.
See More

ACDelco – Premium Double Platinum Tip Copper Core Spark Plug: Long-Lasting Performance & Durability (Part No.41-905)

Premium Double Platinum Tip Copper Core Spark Plug: Long-Lasting Performance & Durability

from

$9.79
ACDelco Professional Double Platinum Spark Plugs are premium aftermarket plugs, and are a high quality replacement for many vehicles on the road today. With a copper core and double platinum pads on the center electrode, these plugs are designed to deliver long-lasting performance. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function.

Product Features:
  • One-piece, fired-in suppressor seal blends three glass types for a gas-tight seal that helps reduce radio frequency and engine interference, regulate spark plug energy, and protect against compression pressures for long life
  • Double platinum point pad on center and ground electrode offer excellent durability and consistent voltage demands to help reduce wear on ignition system
  • Pure copper core results in cooler electrode temperature for maximized durability and fouling resistance
  • Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
  • ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
  • Tapered Seat Design: The tapered seat type ensures a secure fit and optimal sealing in the engine.
  • High-Quality Aftermarket Replacement: Manufactured to meet high standards of fit, form, and function, making it a reliable replacement for many vehicles on the road today.
See More

Motorcraft – Spark Plug: Enhances Durability & Reduces Fuel Consumption (Part No.SP-425)

Spark Plug: Enhances Durability & Reduces Fuel Consumption

from

$2.79
Motorcraft Spark Plugs are original equipment on Ford Motor Company vehicles, engineered to meet strict Ford engineering standards for optimal performance and reliability. These spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption, and optimize emissions. Resistant to oxidation and arc erosion, they feature a multi-rib insulator to protect against misfires and offer service intervals of up to 100,000 miles. Designed with high-quality materials, Motorcraft Spark Plugs ensure reliable performance for a broad range of applications, including domestic and import cars and trucks of all makes and sizes. Backed by Motorcraft’s Service Parts Warranty, they are an exact fit for Ford, Lincoln, and Mercury vehicles, helping to prevent false check engine lights and providing the same quality as the original components installed during manufacturing.

Product Features:
  • Motorcraft spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption and optimize emissions.
  • Backed by Motorcraft’s Service Parts Warranty
  • Exact fit for Ford, Lincoln and Mercury vehicles
  • Resistant to oxidation and arc erosion.
  • Multi-rib insulator protects against misfire.
  • Service intervals of up to 100,000 miles.
  • Motorcraft Spark Plugs are designed with high quality materials to provide reliable performance for almost any application.
  • Motorcraft Spark Plugs are what was in the vehicle when it was manufactured
  • Motorcraft ignition components help prevent false check engine lights.
  • Fuel Efficiency: These spark plugs help reduce fuel consumption, optimizing emissions and contributing to a more efficient engine performance.
See More

ACDelco – Copper Core Spark Plug: Original Equipment Replacement (Part No.R45TS)

Copper Core Spark Plug: Original Equipment Replacement

from

$4.99
ACDelco GM Original Equipment Conventional Spark Plugs are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These Conventional Spark Plugs are designed for reliability and efficient performance, and are a high quality replacement for many vehicles on the road today. Their high-quality copper cores and outstanding suppression characteristics deliver reliable performance. They are also available for Marine applications. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:
  • GM regularly updates production and service part designs to integrate new materials and technologies
  • High-Quality Copper Core: Designed with high-quality copper cores for reliable and efficient performance.
  • Nickel Center Electrode Tip: Features a nickel center electrode tip for enhanced durability and performance.
  • Outstanding Suppression Characteristics: Delivers reliable performance with excellent suppression characteristics.
  • Versatile Applications: Providing high-quality replacement options for various vehicles.
See More

Autolite – Double Platinum Spark Plug: Platinum Firing, Superior Durability, Longer Life (Part No.APP26)

Double Platinum Spark Plug: Platinum Firing, Superior Durability, Longer Life

from

$6.49
With over 100 years of engineering expertise and more than 11 billion plugs sold, Autolite delivers exceptional quality. Designed and engineered in the USA, these spark plugs feature platinum-to-platinum firing, virtually eliminating gap erosion and reducing misfires. The OE design and full-platinum tips on both the center and side electrodes optimize engine performance for a longer life and improved fuel economy. The platinum ball welding process ensures a consistent point of contact for enhanced adhesion, while the tapered seat type further contributes to the plug’s superior durability.

Product Features:
  • Works to optimize engine performance for a longer life and improved fuel economy
  • OE design
  • Full-platinum tips; platinum on both the center and side electrodes to promote reduced gap wear
  • Platinum ball welding process provides a consistent point of contact for enhanced adhesion
  • Engineered in the USA: Backed by over 100 years of engineering expertise and more than 11 billion plugs sold, Autolite spark plugs are designed and engineered in the USA for exceptional quality and reliability.
See More

Carquest Premium – Ignition Contact Set (Part No.AKA1003)

Ignition Contact Set

from

$19.49
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest – Contact Set (Points) (Part No.A109V)

Contact Set (Points)

from

$20.05
BWD SELECT replacement parts are designed, specified and manufactured with one goal in mind – to make them the very best. We use the finest materials and improve on OE specifications whenever possible. The result is maximum performance and longevity.

Product Features:
  • 100% pure copper windings in primary and secondary bobbins improve durability and provide higher resistance to internal shorts and dielectric breakdown
  • Thermoplastic housing withstands heat stress for enhanced durability
  • External core made from oriented silicon steel ensures durability and longevity
  • Stainless steel spring resists corrosion
  • Tin-plated brass terminals improve electrical contact and protect against corrosion
See More

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1414)

Ignition Coil: Meets or Exceeds OE Specifications, 1 Count

from

$41.49
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Built by IATF 16949 certified manufacturers for consistent durability
  • Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
  • Segmented secondary bobbins to distribute high voltage and prevent shorting
  • Extensive design validation testing to ensure long-lasting reliability
  • 100% end-of-line tested to ensure proper performance
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

Carquest – Ignition Coil (Part No.26C1078)

Ignition Coil

from

$34.49
Carquest Ignition Coils ensure fast starts, consistent engine performance and optimized fuel efficiency at an affordable cost.

Product Features:
  • High output
  • Long spark duration
  • High dielectric strength
  • Corrosion resistant connections
  • High reliability
  • Long service life
See More

ACDelco – Ignition Coil (Part No.U505)

Ignition Coil

from

$78.99
An ACDelco Professional, premium aftermarket Ignition Coil is a high quality replacement for many vehicles on the road today. It increases electrical system voltage to help ignite the air/fuel mixture as the starting and charging system starts the engine, maintains the battery’s charge, and provides power to the electrical accessories while the engine is running. An ACDelco Professional Ignition Coil uses pure copper windings to improve durability and provides higher resistance to internal shorts and dielectric breakdown. Because the number and shape of the laminations determine the output characteristics of an ignition coil, ACDelco ensures that the silicone steel plates surrounding the ignition coil correctly match the original part size and number. Since steel laminations work best when they are new, shiny, and clean, ACDelco laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed. This premium aftermarket replacement ignition coil is manufactured to meet your expectations for fit, form, and function.

Product Features:
  • High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
  • Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
  • Laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1715)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$41.49
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
  • Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
See More

Carquest – Ignition Coil (Part No.E70)

Ignition Coil

from

$39.05
BWD® is an aftermarket leader, providing a premium line of engine management products. BWD® manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD® is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • Manufactured with copper windings and permanent magnets to ensure strong signal emission and improved performance
  • High temperature enameled wires were specified for better insulation and performance
  • A full E-Lam core of silicon steel and solid brass high voltage terminals protects against corrosion. Our ignition coils are built for maximum output voltage
  • Primary and Secondary windings feature enamel magnet wire for the highest temperature rating in the aftermarket
  • As a tier I manufacturer with engineering and design capabilities second to none, our ignition coils are made to the highest quality standards
See More

Carquest – Ignition Coil: Meets OE Specifications, 1 Count (Part No.26C1041)

Ignition Coil: Meets OE Specifications, 1 Count

from

$35.49
Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle’s ignition system performance. Carquest ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Long service life and durable performance
  • High dielectric strength for reliability
  • Corrosion-resistant connections
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
  • High reliability
  • Long service life
See More

Carquest Premium – Distributor Cap (Part No.CAC1065)

Distributor Cap

from

$9.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Distributor Cap and Rotor Kit (Part No.CAE1792)

Distributor Cap and Rotor Kit

from

$13.99
Distributor Cap and Rotor Kit

Carquest Premium – Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit (Part No.35-6326)

Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit

from

$46.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

Helping You Find the Right Ignition and Tune-Up Products for Your Checker A11E

You love your A11E. So we’ve made it easier than ever to help you find Checker A11E Ignition and Tune-Up Products in our online catalog. Our inventory holds 25 aftermarket and OEM Ignition and Tune-Up Products for your Checker A11E, ranging from $2.79 to $78.99.

We offer parts from 7 brands trusted to make quality Ignition and Tune-Up Products for your Checker A11E. Before you buy, take some time to read through customer reviews. We currently have 1,625 reviews of Checker A11E Ignition and Tune-Up Products from previous customers. Some of the top rated parts include Double Platinum Spark Plug: Platinum Firing, Superior Durability, Longer Life with 4.4 stars and RAPIDFIRE Premium Platinum Tip Copper Core Spark Plug: Reduces Misfires & Enhances Durability with 4.7 stars.

Find your A11E Ignition and Tune-Up Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Checker A11E part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Ignition and Tune-Up Products Brands for Your Checker A11E

Our inventory holds Ignition and Tune-Up Products for your Checker A11E from 7 trusted brands. You’ll find OEM and aftermarket parts from brands like ACDelco, E3, and Autolite, all of which can keep that Checker happy.
We have Carquest parts available for your Checker A11E in categories like Ignition Coils and Boots and Ignition Kits. Some of the top-rated Carquest parts in these categories are:
Ignition Coil
from $39.05
(3)
Ignition Coil
Ignition Coils
Contact Set (Points)
from $20.05
(2)
Contact Set (Points)
Points and Condensers and Kits

FAQs for Checker A11E Ignition and Tune-Up Products

What are the most purchased Ignition and Tune-Up Products for the Checker A11E?

Out of 25 Ignition and Tune-Up Products for the Checker A11E, the most popular in our inventory are:

What are the top-rated Checker A11E Ignition and Tune-Up Products?

Top-rated Ignition and Tune-Up Products for your Checker A11E based on customer reviews/ratings are:
Copper Plus Spark Plug: Dependable Performance, OE Replacement, RV17YC
from $3.49
(2)
Copper Plus Spark Plug: Dependable Performance, OE Replacement, RV17YC
“this is the proper plug for chrysler hemi engines for best performance. I also used it in my 351 cleveland (73 cougar XR7) at my mechanic’s recommend”