Checker A11E Belts and Hoses
Top Checker A11E Belts and Hoses Categories
We carry over 29 Belts and Hoses in inventory for the Checker A11E. If you’re looking for aftermarket Belts and Hoses for your Checker A11E, check out all these categories:
Essential Checker A11E Belts and Hoses
Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25476)
from
$29.49
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
Product Features:
See More
Product Features:
- Improved sealing surface for greater leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimal inventory
- Heat, oil and ozone resistant
- Rated for SAE 20R5 Class D-2 performance
- Temperature Range: up to +257 Degrees F (+125 Degrees C)
- Note: Gates recommends replacing clamps and connectors each time a new cooling hose is installed.
- Caution: Do not use for fuel or oil transportation applications.
Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25474)
from
$28.49
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
Product Features:
See More
Product Features:
- Improved sealing surface for increased leak resistance
- Their great flexibility makes installation easy
- Maximum vehicle coverage with minimal inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature Range: up to +257 Deg. F (+125 Deg. C)
- Note: Gates recommends replacing clamps and connectors each time a new cooling hose is installed.
- Caution: Do not use for fuel or oil transfer applications
Gates – Premium Molded Coolant Hose (Part No.20145)
from
$42.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Materials specially designed to resist collapse in a vacuum
- Designed to withstand electrochemical degradation, the leading cause of hose failure
- Pre-formed for a good fit and to ensure perfectly sealed connections
- EPDM Tube; synthetic fiber knit reinforcement; EPDM cover resistant to heat, ozone and chemical refrigerants
- Meets the requirements of SAE 20R4, Class D2 and DIN 73411, Class A (except for tolerances)
- Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing clamps and connectors each time a new cooling hose is installed.
- Caution: Do not use for fuel or oil transportation applications.
Dayco – Flex Radiator Hoses; EPDM Rubber, 18.75 Inch Long, 1.75 Inch Inner Dia. (Part No.81341)
from
$18.79
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.
Product Features:
See More
Product Features:
- Designed to meet OE specifications
- Not suitable for oil or heat transfer
- Meets SAE J20R4, Class D-2 requirements for improved service hoses
- This hose is designed to prevent splitting, ballooning, and elongation
Gates – Premium Molded Coolant Hose (Part No.21660)
from
$23.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Dayco – Bottom Cog V-Belt; 31.5 Inch Long, Exact Fit Premium Quality (Part No.15315)
from
$16.79
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.
Product Features:
See More
Product Features:
- Provides greater durability and flexibility – 35% stronger than all previous versions
- Prevents electromechanical interference issues on modern vehicles
- Resists heat, oil and grease
Dayco – Bottom Cog V-Belt; 38 Inch Long, Exact Fit Premium Quality (Part No.15380)
from
$15.49
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.
Product Features:
See More
Product Features:
- Provides greater durability and flexibility – 35% stronger than all previous versions
- Prevents electromechanical interference issues on modern vehicles
- Resists heat, oil and grease
Driveworks – Automotive V-Belt, Driveworks (Part No.50013)
from
$10.49
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.
Product Features:
See More
Product Features:
- This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
- Polyester cords provide extreme tension-holding capability for longer belt life
- The raw edge belt design delivers the maximum gripping power
- The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration
Driveworks – Automotive V-Belt, Driveworks (Part No.31513)
from
$3.99
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.
Product Features:
See More
Product Features:
- This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
- Polyester cords provide extreme tension-holding capability for longer belt life
- The raw edge belt design delivers the maximum gripping power
- The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration
Driveworks – Automotive V-Belt, Driveworks (Part No.38015)
from
$5.49
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.
Product Features:
See More
Product Features:
- This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
- Polyester cords provide extreme tension-holding capability for longer belt life
- The raw edge belt design delivers the maximum gripping power
- The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration
Gates – Green Stripe Heavy-Duty Vulco-Flex Coolant Hose (Part No.26611)
from
$34.99
Heavy-duty flexible hose designed to replace straight or curved coolant hoses. The benefit is maximum coverage with minimum inventory. Hose inside diameter remains constant from end to end. No convolutions inside hose so tube is smooth, allowing free coolant flow. Approved for marine applications.
Product Features:
See More
Product Features:
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- The steel wire spiral allows them to take on multiple shapes without bending or crushing
- EPDM tube and neoprene cover for longer life
- Polyester fabric reinforcement vulcanizes without unnecessary deformation in connections
- Heat, oil and ozone resistant
- Meets SAE 20R5 Type EC Class D-2 specifications
- Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transportation applications.
- Caution: Do not use for fuel or oil transfer applications.
Gates – Premium Molded Coolant Hose (Part No.20584)
from
$33.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Designed to resist electrochemical degradation, which is the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube; synthetic fiber knit reinforcement; heat, ozone- and chemical coolant-resistant EPDM cover
- Meets the requirements of SAE 20R4, Class D2 and DIN 73411, Class A (except for tolerances)
- Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing clamps and connectors each time a new radiator hose is installed.
- Caution: Do not use for fuel or oil transfer applications
Dayco – Straight Heater Hose; EPDM Rubber, 5/8 Inch Diameter (sold by foot) (Part No.80271)
from
$1.99
Specifically designed to carry the heated coolant from the engine block to the heater core under the dashboard and return it to the engine, this Dayco Standard Heater Hose is constructed using all EPDM compounds and spiral reinforcement for high burst strength and excellent heat resistance. Made for general service on light trucks and passenger cars, this hose is similar to SAE 20R3, Class D-2 and has a temperature rating of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). This Dayco Standard Heater Hose is compatible with all common coolant and coolant additives. Note: This hose is NOT suitable for fuel or oil transfer.
Product Features:
See More
Product Features:
- Specifically designed to be compatible with all common coolants and coolant additives
- Constructed using all EPDM compounds and spiral reinforcements
- Similar to SAE 20R3, Class D-2
- Has a high burst strength and excellent heat resistance of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
- PLEASE NOTE: Item is sold and priced by the foot. See store for details.
Dayco – Straight Heater Hose; EPDM Rubber, 3/4 Inch Diameter (sold by foot) (Part No.80273)
from
$1.29
Specifically designed to carry the heated coolant from the engine block to the heater core under the dashboard and return it to the engine, this Dayco Standard Heater Hose is constructed using all EPDM compounds and spiral reinforcement for high burst strength and excellent heat resistance. Made for general service on light trucks and passenger cars, this hose is similar to SAE 20R3, Class D-2 and has a temperature rating of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). This Dayco Standard Heater Hose is compatible with all common coolant and coolant additives. Note: This hose is NOT suitable for fuel or oil transfer.
Product Features:
See More
Product Features:
- Specifically designed to be compatible with all common coolants and coolant additives
- Constructed using all EPDM compounds and spiral reinforcements
- Similar to SAE 20R3, Class D-2
- Has a high burst strength and excellent heat resistance of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
- PLEASE NOTE: Item is sold and priced by the foot. See store for details.
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 1.50" Diameter (Part No.B70081)
from
$24.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12.75" Long, 1.75" Diameter (Part No.C70391)
from
$23.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Gates – Green Stripe Heavy-Duty Vulco-Flex Coolant Hose (Part No.26502)
from
$29.99
Heavy-duty flexible hose designed to replace straight or curved coolant hoses. The benefit is maximum coverage with minimum inventory. Hose inside diameter remains constant from end to end. No convolutions inside hose so tube is smooth, allowing free coolant flow. Approved for marine applications.
Product Features:
See More
Product Features:
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Built-in steel spiral wire allows for medium sized curves without kinking or collapsing
- EPDM tube and neoprene cover for longer life
- The polyester fabric reinforcement takes the form of vulcanization without unnecessary stress on the connections.
- Resistant to heat, oil and ozone
- Performs to SAE 20R5 Type EC Class D-2 specifications
- Temperature range -40 degrees F to +257 degrees F (-40 degrees C to +125 degrees C)
- Caution: Do not use for fuel or oil transfer applications
- Caution: Do not use for fuel or oil transfer applications.
Checker A11E Belts and Hoses Categories
Helping You Find the Right Belts and Hoses for Your Checker A11E
You love your A11E. So we’ve made it easier than ever to help you find Checker A11E Belts and Hoses in our online catalog. Our inventory holds 29 aftermarket and OEM Belts and Hoses for your Checker A11E, ranging from $1.29 to $42.99.
We offer parts from 3 brands trusted to make quality Belts and Hoses for your Checker A11E. Before you buy, take some time to read through customer reviews. We currently have 146 reviews of Checker A11E Belts and Hoses from previous customers. Some of the top rated parts include Automotive V-Belt, Driveworks with 5.0 stars and Automotive V-Belt, Driveworks with 4.7 stars.
Find your A11E Belts and Hoses here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Checker A11E part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Belts and Hoses Brands for Your Checker A11E
Our inventory holds Belts and Hoses for your Checker A11E from 3 trusted brands. You’ll find OEM and aftermarket parts from brands like Dayco, Gates, and DriveWorks, all of which can keep that Checker happy.
We have Dayco parts available for your Checker A11E in categories like Serpentine and V Belts. Some of the top-rated Dayco parts in these categories are:
from
$18.79
(3)
Flex Radiator Hoses; EPDM Rubber, 18.75 Inch Long, 1.75 Inch Inner Dia.
Lower Radiator Hoses
Top-Rated Dayco Belts and Hoses
Leading Dayco Belts and Hoses
We carry Dayco brand parts for your Checker A11E across several catalog categories, including Radiator Hoses and Engine Cooling Hoses. Some of our most reviewed Dayco parts include:
from
$24.99
(16)
Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 1.50" Diameter
Coolant Hoses
from
$7.99
(2)
Flex Radiator Hoses; EPDM Rubber, 12.25 Inch Long, 1.5 Inch Inner Dia.
Lower Radiator Hoses
FAQs for Checker A11E Belts and Hoses
What are the most purchased Belts and Hoses for the Checker A11E?
Out of 29 Belts and Hoses for the Checker A11E, the most popular in our inventory are:
from
$1.99
This product is not rated
Straight Heater Hose; EPDM Rubber, 5/8 Inch Diameter (sold by foot)
Heater Hoses
from
$16.29
This product is not rated
Bottom Cog V-Belt; 37.5 Inch Long, Exact Fit Premium Quality
V-Belts
from
$13.49
This product is not rated
Bottom Cog V-Belt; 50 Inch Long, Exact Fit Premium Quality
V-Belts
What are the top-rated Checker A11E Belts and Hoses?
Top-rated Belts and Hoses for your Checker A11E based on customer reviews/ratings are:
