Cadillac Series 62 Ignition and Tune-Up Products

Essential Cadillac Series 62 Ignition and Tune-Up Products

Mallory – Unilite Breakerless Ignition Conversion Kit (Part No.503M)

Unilite Breakerless Ignition Conversion Kit

from

$176.99
Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.

Product Features:
  • Easy Installation
  • Improved Fuel Economy
  • Reduced Maintenance
  • Accurate Timing
  • Improved Performance
  • Provides A Simple Conversion
  • No Moving Parts To Wear Out
See More

Accel – 8Mm Super Stock Graphite Uni (Part No.4040B)

8Mm Super Stock Graphite Uni

from

$71.99
ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.

Product Features:
  • 7mm And 8mm High Gloss Silicone Jacket
  • 450 F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • RFI Suppression For Street Driven Applications
  • Custom-fit Universal And Import Coverage
  • High-strength Fiberglass Braid Construction
  • Pre And Post HEI Vehicles
See More

Accel – Universal Fit 300+ Race Spark Plug Wire Set (Part No.7040)

Universal Fit 300+ Race Spark Plug Wire Set

from

$176.99
The oversized 8.8mm wire features a double silicone construction rated at over 600 F and 60kV. High gloss black silicone wire jacket not only looks great, but resists heat extremes, petrochemicals, ozone and moisture better than so-called blended materials for greater durability and longer life. High-density, high-temperature silicone insulation provides greater dielectric strength and eliminates arcing and the effects of corona better than typical OE style rubber materials. All-Kevlar stranded inner core and fiberglass braiding add greater pull strength and terminal retention. Stainless steel and brass terminals provide unsurpassed electrical conductivity and excellent corrosion resistance compared to terminals made of common or plated metals.

Product Features:
  • 150 Ohms/ft Of Resistance
  • 600 F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • Custom-fit Universal And Import Coverage
  • Pre And Post HEI Vehicles
  • Spiral-Wound Copper/Nickel Alloy
See More

Carquest Premium – Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit (Part No.35-8334)

Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit

from

$35.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

Accel – Super Stock Elect Coil Chrome (Part No.8145C)

Super Stock Elect Coil Chrome

from

$79.99
Excellent high performance coil for vehicles that have been converted from points to a breakerless electronic distributor or electronic ignition system, where a canister type oil filled can coil is preferred. Designed with optimized low resistance, high turns ratio windings to work specifically with ACCEL 41, 51, 52, 61 & 71000 Series breakerless electronic replacement distributors. Engineered for higher energy output resulting in quicker starting, improved throttle response and more high RPM power. Special crimped and soldered internal connections ensure positive contacts. High performance tan Alkyd tower provides “”flashover”” protection to primary terminals. Available in “”ACCEL Yellow”” or Chrome Plated can.

Product Features:
  • Engineered for higher energy output
  • Improved throttle responce
  • More high RPM power
  • Chrome Plated
See More

Accel – 7Mm Super Stock Copper Uni (Part No.3008)

7Mm Super Stock Copper Uni

from

$53.09
ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.

Product Features:
  • 7mm Yellow Silicone Jacket
  • Street-driven Applications
  • Copper Core
  • Orange Spark Plug Boots
  • Pre HEI Vehicles
  • Universal Wire Set
See More

Accel – Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set (Part No.4040K)

Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set

from

$71.99
These ACCEL wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with black wire contain zinc-plated steel terminals. Noise suppression core. Set contains 8 plug wires with coil lead.

Product Features:
  • 7mm And 8mm High Gloss Silicone Jacket
  • 450° F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • RFI Suppression For Street Driven Applications
  • Custom-fit Universal And Import Coverage
  • High-strength Fiberglass Braid Construction
See More

ACDelco – Ignition Capacitor (Part No.D204)

Ignition Capacitor

from

$16.99
ACDelco Professional Ignition Condenser is a high quality aftermarket replacement component for one or more of the following vehicle systems: cooling, hvac, ignition, starting and charging, body-electrical and lighting, wiper and washer, and/or engine fuel management. This premium aftermarket condenser is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Carquest Premium – Ignition Coil Mounting Bracket (Part No.MBA1001)

Ignition Coil Mounting Bracket

from

$13.99
All ignition system accessories are application matched components designed to restore your original ignition system to like new condition.

Product Features:
  • Application matched component to ensure the system can be returned to like new condition.
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Carquest Premium – Distributor Cap (Part No.CAC1094)

Distributor Cap

from

$27.99
The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:
  • All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
  • Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
  • Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
  • Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.
See More

Carquest Premium – Distributor Cap (Part No.CAC1103)

Distributor Cap

from

$22.99
The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:
  • All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
  • Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
  • Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
  • Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.
See More

Victor Reinz – Distributor O-Ring (Part No.41-10395-00)

Distributor O-Ring

from

$2.29
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Carquest Premium – Distributor Rotor (Part No.DAA1004)

Distributor Rotor

from

$8.99
The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:
  • All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
  • Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
  • Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
  • Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.
See More

Carquest – Distributor Rotor (Part No.23A1019)

Distributor Rotor

from

$7.99
The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine¿s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:
  • All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
  • Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
  • Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
  • Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.
See More

Carquest Premium – Ignition Condenser (Part No.GAA1039)

Ignition Condenser

from

$16.99
An Ignition Capacitor is a device that will absorb excessive voltage spikes in electrical systems. The typical location or use for a capacitor is inside a distributor tied into a point ignition system. The ignition capacitor may also be called a radio capacitor or condenser used in electrical devices which may be susceptible to voltage spikes.

Product Features:
  • Application matched component to ensure the system can be returned to like new condition.
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Accel – Contact Set Hp 32 Oz (Part No.110128)

Contact Set Hp 32 Oz

from

$59.99
Heavy duty points sets are quipped with extra think contack arms to prevent flexing at high RPMS. Large radiused tungsten contants provide crisp circuit breaking for peak coil output. High strength phenolic rubbing blocks provide superior durability when used with heavy duty spring tension.

Product Features:
  • Extra Thick Contact Arms
  • Large Radius Tungsten Contacts
  • High Strength Phenolic Rubbing Blocks
  • Prevents Points Float
  • Moisture-Proof Buna-N Condenser
See More

Champion – Copper Plus Spark Plug (RJ14YC): Dependable Performance & Durability (Part No.63)

Copper Plus Spark Plug (RJ14YC): Dependable Performance & Durability

from

$4.79
Copper Plus spark plug delivers dependable performance and durability, making it a reliable choice for maintaining your vehicle’s efficiency. Featuring a copper core center electrode, it ensures precise heat control and enhanced conductivity, promoting longer life and consistent wear. The nickel-tipped center and ground electrodes provide superior corrosion resistance, ensuring optimal performance even in demanding conditions. Designed to meet ISO and SAE Standards, this spark plug guarantees proven reliability and compatibility with standard replacement needs. Its flat seat type and built-in resistor further enhance its functionality, making it a practical solution for maintaining engine performance. Whether you’re seeking durability or consistent ignition, this spark plug offers excellent value for your vehicle’s maintenance.

Product Features:
  • Copper Plus – Dependable Performance.
  • Copper core center electrode allows for accurate control of heat range for longer life
  • Patented TinTac and ULTRASEAL coated shell for maximum corrosion resistance
  • Patented SAC-9 semiconductor resistor for maximum EMI & RFI suppression
  • Built to ISO and SAE standards for proven performance
See More

Autolite – Copper Resistor Spark Plug: Quick Starts & Reliable Performance (Part No.86)

Copper Resistor Spark Plug: Quick Starts & Reliable Performance

from

$4.29
Autolite Copper spark plugs are crafted to ensure reliable performance and quick starts, making them an ideal choice for your vehicle or application. Featuring a copper core center electrode, these spark plugs excel in thermal control and resist fouling, ensuring consistent functionality. The high nickel alloy center and ground electrodes are designed for extended life, while the mid-projection standard center electrode enhances ignition efficiency. Built with a high alumina multi-rib ceramic insulator, these spark plugs offer superior insulation and thermal conductivity for added strength. The nickel-plated shell provides exceptional corrosion resistance, ensuring durability over extended use. With a flat seat type and integrated resistor, these spark plugs deliver dependable performance while maintaining compatibility with regular-grade applications. Designed to meet your performance expectations, Autolite Copper spark plugs combine advanced materials and engineering for lasting value and reliability.

Product Features:
  • The copper core center electrode aids in thermal control and improves resistance to fouling.
  • Its specially engineered high nickel alloy center and ground electrode provides extended life.
  • The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
  • Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
  • The integrated resistor ensures dependable performance and compatibility with regular-grade applications, enhancing reliability and versatility.
See More

ACDelco – Double Platinum Spark Plug: Long-Lasting Performance & Durability (Part No.41-833)

Double Platinum Spark Plug: Long-Lasting Performance & Durability

from

$12.99
ACDelco Gold (Professional) Double Platinum Spark Plug are a high quality alternative to Original Equipment (OE) parts. With a copper core and double platinum pads on the center electrode, these plugs are designed to deliver long-lasting performance. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.

Product Features:
  • One-piece, fired-in suppressor seal blends three glass types for a gas-tight seal that helps reduce radio frequency and engine interference, regulate spark plug energy, and protect against compression pressures for long life
  • Double platinum point pad on center and ground electrode offer excellent durability and consistent voltage demands to help reduce wear on ignition system
  • Pure copper core results in cooler electrode temperature for maximized durability and fouling resistance
  • Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
  • Premium aftermarket replacement part
  • Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
See More

MSD Ignition – Wire Set; Super Conductor; 8-cyl. Multi-Angle Plug; Socket/HEI (Part No.31199)

Wire Set; Super Conductor; 8-cyl. Multi-Angle Plug; Socket/HEI

from

$140.99
Set includes terminals for engines with early type (socket) and late type (HEI spark plug top) distributor caps. 90 degree boots and terminals factory installed on one end.

Product Features:
  • Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
  • Incl. both socket-style and spark plug-style boots and terminals
  • Includes Mini-Stripper-Crimper For Factory Style Crimps
  • Size Includes: [2]48/50/56 in./[3] 32 in. Wires/Boots/Terminals
  • Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
  • Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
See More

Accel – 8Mm Super Stock Copper Uni (Part No.4038)

8Mm Super Stock Copper Uni

from

$79.99
ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.

Product Features:
  • 7mm And 8mm High Gloss Silicone Jacket
  • 450 F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • RFI Suppression For Street Driven Applications
  • Custom-fit Universal And Import Coverage
  • High-strength Fiberglass Braid Construction
  • Pre And Post HEI Vehicles
See More

PerTronix – 808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red (Part No.808415)

808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red

from

$88.99
Most modern electronic ignition systems require suppression style wires to preserve sensitive components. Flame-Thrower 8mm Custom fit MAGx2 wires provide enhanced RFI suppression and dual current paths for more power delivered to the spark plug. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cutting, crimping and splicing.

Product Features:
  • Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
  • Low 500 ohm per foot resistance.
  • 8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
  • EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
  • Fiberglass reinforcing braid for added strength and flexibility.
See More

PerTronix – 11830 Module replacement (only) (one module) for 1183 Ignitor Kit (Part No.11830)

11830 Module replacement (only) (one module) for 1183 Ignitor Kit

from

$118.99
For over thirty years, the Ignitor has proven itself in applications ranging from race cars to tractors. The Ignitor replaces breaker points and troublesome factory electronic ignitions.

Product Features:
  • PerTronix 11830 Module replacement (only) (one module) for 1183 Ignitor Kit
  • Replacement Parts (only) for Ignitor and Ignitor II Kits
See More

Helping You Find the Right Ignition and Tune-Up Products for Your Cadillac Series 62

You love your Series 62. So we’ve made it easier than ever to help you find Cadillac Series 62 Ignition and Tune-Up Products in our online catalog. Our inventory holds 82 aftermarket and OEM Ignition and Tune-Up Products for your Cadillac Series 62, ranging from $2.29 to $391.99.

We offer parts from 14 brands trusted to make quality Ignition and Tune-Up Products for your Cadillac Series 62. Before you buy, take some time to read through customer reviews. We currently have 2,308 reviews of Cadillac Series 62 Ignition and Tune-Up Products from previous customers. Some of the top rated parts include Copper Plus Small Engine Spark Plug (J8C): Dependable Performance & Durability with 4.8 stars and Platinum Spark Plug: Enhanced Durability & Improved Performance with 4.9 stars.

Find your Series 62 Ignition and Tune-Up Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Cadillac Series 62 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Ignition and Tune-Up Products Brands for Your Cadillac Series 62

Our inventory holds Ignition and Tune-Up Products for your Cadillac Series 62 from 14 trusted brands. You’ll find OEM and aftermarket parts from brands like ACDelco, Autolite, and NGK, all of which can keep that Cadillac happy.
We have Carquest Premium parts available for your Cadillac Series 62 in categories like Ignition Coils and Boots. Some of the top-rated Carquest Premium parts in these categories are:
Spark Plug Wire Set
from $35.99
(4)
Spark Plug Wire Set
Ignition Coil Boots

Top-Rated Accel Ignition and Tune-Up Products

Leading Accel Ignition and Tune-Up Products

We carry Accel brand parts for your Cadillac Series 62 across several catalog categories, including Ignition Boots and Ignition Wires. Some of our most reviewed Accel parts include:
7Mm Super Stock Copper Uni
from $53.09
(12)
7Mm Super Stock Copper Uni
Standard Spark Plug Wires
8Mm Super Stock Spiral Uni Rd
from $110.99
(11)
8Mm Super Stock Spiral Uni Rd
Standard Spark Plug Wires

FAQs for Cadillac Series 62 Ignition and Tune-Up Products

What are the most purchased Ignition and Tune-Up Products for the Cadillac Series 62?

Out of 82 Ignition and Tune-Up Products for the Cadillac Series 62, the most popular in our inventory are:

What are the top-rated Cadillac Series 62 Ignition and Tune-Up Products?

Top-rated Ignition and Tune-Up Products for your Cadillac Series 62 based on customer reviews/ratings are:
Copper Plus Small Engine Spark Plug (J8C): Dependable Performance & Durability
from $3.79
(13)
Copper Plus Small Engine Spark Plug (J8C): Dependable Performance & Durability
“Bought it for a Troy-Built Tomahawk chipper.”
Platinum Spark Plug: Enhanced Durability & Improved Performance
from $4.99
(10)
Platinum Spark Plug: Enhanced Durability & Improved Performance
“I used these plugs on a 400 bb mopar with 64/426 wedge heads .made tho engine run so much better the your standard copper plugs.yes I will buys these ”
V-Power Nickel Spark Plug (XR5): Enhanced Ignitability & Performance
from $6.99
(9)
V-Power Nickel Spark Plug (XR5): Enhanced Ignitability & Performance
“Yes they make the zap.zap when piston comes up to.compress fuel.and air”