from

$112.99

Automatic Transmission Elect Harness Vss Repair

from

$29.99

ATP Transmission Components are exact fit, no compromise replacement parts

from

$29.99

Automatic Transmission Band (Intermediate)

from

$26.49

ATP Transmission Components are exact fit, no compromise replacement parts

from

$4.29

Automatic Transmission Fluid Filler Tube Seal

from

$99.99

When swapping the TH400 transmission into any vehicle, this kit makes installation of the transmission’s kickdown feature a snap. This switch mounts to either a TH700R4, TH200, TH200-R4 or TH350 throttle cable bracket.

Product Features:

Allows High Speed Cruise
Cruise In Overdrive
Prevents Part Throttle Kickdown
Quick Installation

from

$128.99

This kit allows you to adjust the shift points of your transmission after it is installed in your vehicle. The Governor Recalibration Kit is very useful if you have a vehicle that is very light; has a low rear-end gear ratio.

Product Features:

Adjust Shift Points Of Transmission
Useful For Light Vehicles
For Low Rear End Gear Ratio
Or Useful If It Is Conversion

from

$48.99

The transmission modulator valve is a vacuum operated mechanical device located on the transmission case. This valve will have a actuator rod extended into the transmission valve body inside the transmission which will control the flow of transmission fluid within the transmission to place the transmission in the most optimal forward gear selection.

Product Features:

Application matched component ensures the transmission gear position system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
This part will look and function just like the original unit being replaced.

from

$51.99

AT MODULATOR VALVE

from

$33.99

Cable Bracket, GM (Bandit style shifters only) APPLICATION: For TH-400, 350, 250, 200, 700R4, 200-4R with 80797, 80798 or 81050 shifter.

Product Features:

Shifter Service Parts
Steel
Natural Finish
Sold individually
Replacement for Bandit shifters

from

$11.79

ATP Transmission Components are exact fit, no compromise replacement parts

from

$12.79

ATP Transmission Components are exact fit, no compromise replacement parts

from

$9.59

ATP Transmission Seals And Gaskets are exact fit, no compromise replacement parts

from

$3145.99

At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$3145.99

At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$3145.99

At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$3145.99

At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$49.99

Detent cables connect the throttle mechanism to the transmission. Old cables can bind, break, or just become sluggish. The best repair is to replace the old cable with a new one. Pioneer detent cables are designed to fit and function just like the original part to ensure durability and long life.

Product Features:

Includes brackets, grommets, etc to match original
Fits many GM transmissions
Adjustable

from

$7.99

ATP Detent Cable End repair damaged or bent end clips found on 1980-96 General Motors applications.

Product Features:

Saves money by allowing cable repair instead of replacement.
Easy to use

from

$28.49

Detent cables connect the throttle mechanism to the transmission. Old cables can bind, break, or just become sluggish. The best repair is to replace the old cable with a new one. Pioneer detent cables are designed to fit and function just like the original part to ensure durability and long life.

Product Features:

Includes brackets, grommets, etc to match original
Helps transmission determine ideal downshift
Improves vehicle performance

from

$70.99

ATP Transmission Components are exact fit, no compromise replacement parts

from

$58.99

ATP Transmission Components are exact fit, no compromise replacement parts

from

$99.99

ATP Transmission Components are exact fit, no compromise replacement parts

from

$106.99

ATP Transmission Components are exact fit, no compromise replacement parts

from

$38.99

An automatic transmission is a hydraulic multi-speed device that does not require any input from the vehicle operator other than selecting vehicle direction. Hydraulic pressure is controlled by a series of electronic shift solenoids that are commanded by the transmission control module. Planetary gear sets and hydraulically controlled shift plates and brake bands apply power to the main shaft in the transmission and out to the vehicles drive wheels.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Precision-wound coated copper windings increase product durability and life cycle.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.