Cadillac CTS Body Parts
Top Cadillac CTS Body Parts Categories
We carry over 150 Body Parts in inventory for the Cadillac CTS. If you’re looking for aftermarket Body Parts for your Cadillac CTS, check out all these categories:
Essential Cadillac CTS Body Parts
Needa Parts – Panel Trim Retainer – Interior – GM/Chrysler (Part No.45478)
from
$2.79
Needa Parts, a division of the Hillman Group, is an industry leader in all types of automotive body fasteners, retainers, and clips, offering over 400 SKUs of interior, exterior, and underhood fasteners.
Product Features:
See More
Product Features:
- Needa Parts offers a complete assortment for all popular makes and models
- Vehicle make specific fastener kits are available
- All fasteners meet or exceed OEM standards
Dorman – GM Blind Rivet Retainer – Diameter 3/16 In. (Part No.963-205D)
from
$4.99
Dorman offers a comprehensive variety of rivets for almost any automotive fastening job. They’re available in a broad variety of lengths, head diameters, hole diameters, and grip ranges.
Product Features:
See More
Product Features:
- Available in blind, push-in and screw-in styles
- Constructed of high-quality materials for long-lasting durability
- Also suitable for a broad variety of industrial and commercial uses
- Packaged in a variety of piece counts for use with both small and large projects
KAI – Bumper Cover Grille (Part No.GM1015128)
from
$136.99
New Standard Replacement Front Bumper Cover Grille, Lower Absorber [Not Structural]
Product Features:
See More
Product Features:
- Lower Absorber [Not Structural], Made Of Polypropylene
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Carquest Premium – Multi-Use Connector (Part No.PTA2539)
from
$26.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Premium – Multi-Use Connector (Part No.PTA1424)
from
$73.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Premium – Multi-Use Connector (Part No.PTC1443)
from
$47.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
GM Genuine Parts – Natural Colored Multi-Purpose Pigtail (Part No.PT2652)
from
$68.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Protective outer coverings help provide long-lasting durability
- Color-coded wires allow for easy installation
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Dorman – Liftgate Lock Actuator (Part No.931-107)
from
$331.99
This liftgate lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Reliable replacement – this liftgate lock actuator has undergone extensive quality and safety performance testing
- Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
- Cost-effective solution – offers original equipment quality at competitive price
- Quality tested – this part has undergone try-on and cycle testing to ensure a quality fit and long service life
K-Source – Mirror Assembly: Passenger Side, Power Adjustment, Heated, Foldable, 1 Pk (Part No.62741G)
from
$151.99
Original Equipment Manufacturer Style Replacement Side View Mirror. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.
Product Features:
See More
Product Features:
- Passenger side Mirror, tested to fit and function like the original, Meets or exceeds Original Equipment Manufacturer standards
- Mirror glass is power adjustable and heated
- OE-comparable wiring harness/ connection (no “pigtail” connector) for hassle-free installation
- Manual folding for additional clearance
- Black
KAI – New Standard Replacement Outer Grille Molding (Part No.GM1202102)
from
$574.99
As the leading value-added global distributor of high quality replacement components, equipment, and parts to repair and accessorize their automobiles, trucks, and other vehicles while offering our customers the most comprehensive and cost effective part solutions, KAI is supplying a new standard replacement outer grille molding, for sedan models, chrome. It is designed to replace your existing outer grille molding. Check to be sure it fits your vehicle.
Product Features:
See More
Product Features:
- For Sedan Models, Chrome, Made Of ABS Thermoplastic
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Warranty: Limited
- Check Out The Large Selection Of Parts Available For Your Vehicle
Carquest Premium – Door Window Switch (Part No.WSC2893)
from
$199.99
The Door Window Switch is an application specific part typically mounted to the inside door panel used to remotely open and close the door windows by way of the switch.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
- Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Dorman – Moulding Retainer Head Dia 0.27 X 0.6 In Shank Lng 0.224 In Hole Dia 0.35 In (Part No.963-567)
from
$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – Splash Shield Retainer Clips (Part No.961-037)
from
$3.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Carquest Premium – Multi-Use Connector (Part No.PTA2575)
from
$25.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
KAI – New Premium Replacement CAPA Certified Rear Bumper Impact Absorber (Part No.GM1170223C)
from
$209.99
As the Leading Value-Added Global Distributor of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles While Offering Our Customers the Most Comprehensive and Cost Effective Part Solutions, We Are Supplying a New Premium Replacement CAPA Certified Rear Bumper Impact Absorber, for Sedan Models. It is Designed to Replace Your Existing Bumper Impact Absorber. Check to Be Sure it Fits Your Vehicle.
Product Features:
See More
Product Features:
- Sedan Models, Made Of Expanded Polypropylene
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Dorman – XMAS TREE FSTR (Part No.963-153D)
from
$7.29
XMAS TREE FSTR
GM Genuine Parts – Argent Trunk Lid Release Switch (Part No.D1417G)
from
$35.99
GM Genuine Parts Trunk Lid Release Switches are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
GM Genuine Parts – Black Multi-Purpose Pigtail (Part No.PT2712)
from
$34.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Protective outer coverings help provide long-lasting durability
- Color-coded wires allow for easy installation
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
KAI – Fender Liner (Part No.GM1248199C)
from
$74.99
New CAPA Certified Standard Replacement Driver Side Fender Liner
Product Features:
See More
Product Features:
- Made Of Polypropylene
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Hood Molding (Part No.GM1235117)
from
$84.99
New Standard Replacement Hood Molding
Product Features:
See More
Product Features:
- Made Of Plastic
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Carquest Premium – Multi-Use Connector (Part No.PTA1405)
from
$41.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
StrongArm – Hood Lift Support: 28.81" Ext Length, 11.5" Travel, 56 Lbs of Force, 1 Pk (Part No.B6307)
from
$46.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.
Product Features:
See More
Product Features:
- Heavy Gauge Steel Body
- Self-Cleaning Piston Assembly
- Rubber O-Ring Piston Seal
GM Genuine Parts – Multi-Purpose Pigtail (Part No.PT2882)
from
$69.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Protective outer coverings help provide long-lasting durability
- Color-coded wires allow for easy installation
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Dorman – Help – Exterior Door Handle, Primed Black (Part No.96603)
from
$179.99
Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
- Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
- Excellent value – original equipment quality at a lower price
- Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace
ACDelco – 2-Way Female Gray Multi-Purpose Pigtail (Part No.PT209)
from
$30.49
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Protective outer coverings help provide long-lasting durability
- Color-coded wires allow for easy installation
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Cadillac CTS Body Parts Categories
Helping You Find the Right Body Parts for Your Cadillac CTS
You love your CTS. So we’ve made it easier than ever to help you find Cadillac CTS Body Parts in our online catalog. Our inventory holds 150 aftermarket and OEM Body Parts for your Cadillac CTS, ranging from $0.99 to $919.99.
We offer parts from 14 brands trusted to make quality Body Parts for your Cadillac CTS. Before you buy, take some time to read through customer reviews. We currently have 551 reviews of Cadillac CTS Body Parts from previous customers. Some of the top rated parts include GM Blind Rivet Retainer – Diameter 3/16 In. with 5.0 stars and Rivet-Push In-Hole Diameter .500 In-Head Diameter 1 In-Length .900 In with 5.0 stars.
Find your CTS Body Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Cadillac CTS part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Body Parts Brands for Your Cadillac CTS
Our inventory holds Body Parts for your Cadillac CTS from 14 trusted brands. You’ll find OEM and aftermarket parts from brands like Dorman, StrongArm, and GM Genuine, all of which can keep that Cadillac happy.
We have StrongArm parts available for your Cadillac CTS in categories like Vehicle Hoods. Some of the top-rated StrongArm parts in these categories are:
from
$71.99
(2)
Hood Lift Support: 26.18" Ext Length, 10.75" Travel, 65 Lbs of Force, 1 Pk
Lift Supports
from
$18.29
(1)
Trunk Lift Support: 11.102" Ext Length, 3.63" Travel, 157 Lbs of Force, 1 Pk
Lift Supports
from
$18.29
(9)
Trunk Lift Support: 11.5" Ext Length, 3.63" Travel, 152 Lbs of Force, 1 Pk
Lift Supports
Top-Rated StrongArm Body Parts
Leading StrongArm Body Parts
We carry StrongArm brand parts for your Cadillac CTS across several catalog categories, including Vehicle Hoods. Some of our most reviewed StrongArm parts include:
from
$46.99
(3)
Hood Lift Support: 28.81" Ext Length, 11.5" Travel, 56 Lbs of Force, 1 Pk
Lift Supports
FAQs for Cadillac CTS Body Parts
What are the most purchased Body Parts for the Cadillac CTS?
Out of 150 Body Parts for the Cadillac CTS, the most popular in our inventory are:
What are the top-rated Cadillac CTS Body Parts?
Top-rated Body Parts for your Cadillac CTS based on customer reviews/ratings are:
from
$4.99
(2)
GM Blind Rivet Retainer – Diameter 3/16 In.
“Wow so the Traverse middle row roof window… The bracket that locks the cover broke.. After many failed starts I went to Advanced on Miller Rd columb”
from
$5.99
(1)
Rivet-Push In-Hole Diameter .500 In-Head Diameter 1 In-Length .900 In
“Used these to replace a couple broken rivets in fan shroud, and they fit well and worked great.”
