Buick Somerset Heater Hoses
Your One-Stop Shop For Trusted Buick Somerset Heater Hoses
If you’re in search of Buick Somerset Heater Hoses aftermarket or OEM parts, consider your search over! Advance Auto Parts carries 6 Heater Hoses from top brands with prices ranging from $1.49 to $22.99.
Beyond great prices, we stock trusted brands manufacturing all types of Heater Hoses for your Buick Somerset. Of the 2 OEM and aftermarket parts brands we carry, some of the most popular are Dayco and Gates.
And don’t forget to read customer reviews across all Heater Hoses categories in our catalog. Buy with confidence by leveraging past customer experiences of our aftermarket and OEM parts.
At Advance Auto Parts, we don’t think top quality Heater Hoses have to cost top dollar, and we prove it. Browse our top Buick Somerset Heater Hoses below, order online to ship to your home, or head into your nearest Advance Auto Parts location to get started.
Essential Buick Somerset Heater Hoses
Gates – Premium Molded Heater Hose (Part No.18303)
from
$22.79
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
Product Features:
See More
Product Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Gates – Vulco-Flex« II Flexible Coolant Hose (Part No.25252)
from
$18.79
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
Product Features:
See More
Product Features:
- Improved sealing surface for greater leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimum inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature Range: up to +257 Deg. F (+125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Gates – Straight Heater Hose: EPDM, Direct Fit, 0.625" Inside Diameter (Sold by foot) (Part No.28411)
from
$1.49
Premium hose constructed for long service life.
Product Features:
See More
Product Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- CAUTION: Do not use for fuel or oil transfer applications
- CAUTION: Do not use for fuel or oil transfer applications
- PLEASE NOTE: Item is priced and sold by the foot. See store for details.
Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 18 Inch Length (Part No.88361)
from
$18.29
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.
Product Features:
See More
Product Features:
- Meets the requirements of SAE J20R3, Class D-1
- Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Engineered as an OEM replacement
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
Dayco – Molded Heater Hose; EPDM Rubber, 3/8 Inch Diameter, 6 1/4 Inch Length (Part No.87003)
from
$8.29
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.
Product Features:
See More
Product Features:
- Meets the requirements of SAE J20R3, Class D-1
- Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Engineered as an OEM replacement
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 5 Inch Length (Part No.88363)
from
$22.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.
Product Features:
See More
Product Features:
- Meets the requirements of SAE J20R3, Class D-1
- Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Engineered as an OEM replacement
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
Buick Somerset Heater Hoses List
Heater Hoses Brands You Can Trust For Your Buick Somerset
2 trusted brands of Heater Hoses line our shelves, ready to help keep your Buick Somerset running smooth. Below are some of the most popular brands and their top Heater Hoses offerings:
Most Purchased Buick Somerset Heater Hoses from Dayco
When you buy the most frequently purchased Dayco brand Heater Hoses, you can be confident it will be the right part for your Buick Somerset. Here are the Dayco Heater Hoses Advanced Auto customers buy the most:
from
$18.29
This product is not rated
Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 18 Inch Length
Heater Hoses
from
$8.29
This product is not rated
Molded Heater Hose; EPDM Rubber, 3/8 Inch Diameter, 6 1/4 Inch Length
Heater Hoses
FAQs for Buick Somerset Heater Hoses
What are the most purchased Heater Hoses for the Buick Somerset?
Out of 6 Heater Hoses for the Buick Somerset, the most popular in our inventory are:
from
$18.29
This product is not rated
Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 18 Inch Length
Heater Hoses
from
$8.29
This product is not rated
Molded Heater Hose; EPDM Rubber, 3/8 Inch Diameter, 6 1/4 Inch Length
Heater Hoses
from
$22.99
This product is not rated
Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 5 Inch Length
Heater Hoses
