Buick Riviera Fuel and Emissions Systems

ACDelco Professional Vapor Canister Purge Solenoid is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket solenoid is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

• Professional, premium aftermarket replacement
• Provides the performance and dependability you expect from ACDelco
• Manufactured to meet expectations for fit, form, and function

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tanks meet or exceed the performance of the original equipment they replace.

Product Features:

• Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
• Lock ring included with each tank to reduce installation time and to ensure a complete repair
• Made with corrosion resistant, OE approved, Ni Terne steel for durability
• Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
• Each new fuel tank is road tested to ensure real world performance and to verify that each design meets our high standards for quality
• Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
• Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
• Packaged with double-layered foam wrap and heavy-gauge corrugated board to ensure product quality at installation

NGK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

• OEM QUALITY: is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
• PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, Oxygen Sensors offer superior OE fit, form, function
• OE TECHNOLOGY: Upgraded to the latest OE technologies, Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
• EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
• EASY INSTALLATION: Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
• ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
• ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

The EGR system is an emission control device designed to recirculate exhaust gas into the engines air intake system and back to the combustion chamber to control nitrogen oxides or NOx. The chemical NOx is created when oxygen and nitrogen are heated above 2,800-degree F. Exhaust gas, or gas that is displaced from the combustion chamber, contains little to no oxygen molecules. By recirculating this gas back into the combustion chamber fewer oxygen molecules are available for the combustion event which will therefore create a cooler combustion event. The EGR valve can be actuated by engine vacuum or electronically by the engine control module.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Our EGR valves are designed to match the vehicle specific exhaust gas flow rate as designed by the engine manufacturer to provide clean tail pipe emissions.
• Feedback EGR valves and pressure sensors contain a robust circuit board design which increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• Where applicable stainless-steel sleeves used over cold rolled sleeves providing smooth EGR pintle operation under all operating conditions.

Product Features:

• DESIGNED FOR IMPERFECT SEALING SURFACES: Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
• SEALING TECHNOLOGIES: Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
• ENGINEERING EXPERTISE: Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
• REAL-WORLD TESTED: Parts are tested on-vehicle and validated to ensure optimal performance on the road
• EVERY PART FOR THE REPAIR: Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Protective outer coverings help provide long-lasting durability
• Color-coded wires allow for easy installation
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

Replace only the damaged connectors instead of the entire fuel line with these direct-replacement fuel line connectors. Designed for easy installation and a precise fit, they are engineered to withstand extreme underhood conditions.

Product Features:

• Direct replacement – these fuel line connectors fit and function like the vehicle’s original equipment connectors for reliable, leak-free performance
• Quality construction – manufactured from premium materials for a long service life
• Saves money – replace only the part, not the entire assembly
• Excellent value – original equipment quality at a lower price

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

Carquest Premium fuel tank lock rings are built by Carter Fuel Systems and Agility Auto Parts, industry leaders in high-quality fuel system components. Carquest Premium offers a complete line of fuel tank lock rings covering a wide variety of North American vehicle applications. Carquest Premium fuel tank lock rings are engineered to meet or exceed all OEM specifications. Carquest Premium fuel tank lock rings are precision stamped and are treated with a rust proof finish to ensure durability and strength.

Product Features:

• Engineered to meet or exceed all OEM specifications.
• Precision stamped and are treated with a rust proof finish to ensure durability and strength.

Carquest Premium fuel pump tank seals are built by Carter Fuel Systems and Agility Auto Parts, industry leaders in high-quality fuel system components. Carquest Premium offers a complete line of fuel pump tank seals covering a wide variety of North American vehicle applications. Carquest Premium fuel pump tank seals are engineered to meet or exceed all OEM specifications.

Product Features:

• Engineered to meet or exceed all OEM specifications.
• Precision stamped and are treated with a rust proof finish to ensure durability and strength

The EGR system is an emission control device designed to recirculate exhaust gas into the engines air intake system and back to the combustion chamber to control nitrogen oxides or NOx. The chemical NOx is created when oxygen and nitrogen are heated above 2,800-degree F. Exhaust gas, or gas that is displaced from the combustion chamber, contains little to no oxygen molecules. By recirculating this gas back into the combustion chamber fewer oxygen molecules are available for the combustion event which will therefore create a cooler combustion event. The EGR valve can be actuated by engine vacuum or electronically by the engine control module.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Our EGR valves are designed to match the vehicle specific exhaust gas flow rate as designed by the engine manufacturer to provide clean tail pipe emissions.
• Feedback EGR valves and pressure sensors contain a robust circuit board design which increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• Where applicable stainless-steel sleeves used over cold rolled sleeves providing smooth EGR pintle operation under all operating conditions.

The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
• Application matched components ensures system operation in like new condition.

Carquest Premium idle air control valves are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Idle air control valves, or sometimes known as idle air motors, are used to maintain the engine speed at idle by precisely adjusting the amount of air allowed to enter the intake. Our Carquest Premium idle air control (IAC) valves are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium idle air control valves undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium idle air control valves are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Designed to meet or exceed OE specifications for fit, form and function
• Precision engineering and robust design to withstand harsh under hood environment
• Gaskets or seals are included if required for installation
• Extensive design validation testing and 100% end-of-line tested
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

The Secondary Air Injection system is an emission control device designed to pump fresh air into the engine exhaust system to reduce harmful emissions. The Air Injection Pump Check Valve will allow air flow in one direction only to prevent an engine back-fire condition.

Product Features:

• Application matched component to ensure the system can be returned to like new condition.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Dorman offers a comprehensive line of Idle Air Control Valve Connectors for a wide range of applications. All our Idle Air Control Valve Connectors are constructed of high-quality materials for long-lasting durability. We also offer a full selection of electrical terminals to complete the job.

Product Features:

• Appropriate for 4-wire configurations.
• Direct replacement Idle Air Control Valve Connectors available (where applicable) to ensure a proper fit
• Vehicle try-on testing has been conducted on this part to ensure a trouble-free performance
• Easy installation-just splice in the new socket to your existing wiring

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

• Passes all state and federal emissions tests
• Independently tested for emission control
• Independently tested for emission control
• Protects your fuel from theft and vandalism
• Reduces air pollution with proper sealing and venting
• Manufactured from durable, long-life materials

When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:

• Helps avoid premature fuel pump failure
• Lint free towel included
• Low suds formulation
• Removes harmful contaminants from the fuel tank

Maximize your vehicle’s efficiency and emissions control with Carquest Vapor Canister Purge Solenoids. Engineered for precision, these solenoids seamlessly regulate the flow of fuel vapors from the Vapor Canister to the engine for cleaner combustion, reducing harmful emissions. Built to meet and/or exceed OEM standards, Carquest Purge Solenoids offer reliable functionality, long-lasting durability, and easy installation.

Product Features:

• Enhances overall engine performance by providing proper vapor flow to maintain correct air-fuel mixture.
• Helps reduce harmful emissions and ensures compliance with environmental regulations by controlling the release of fuel vapors into the engine
• Ensures precise operation with electromagnetic principles to control the flow of fuel vapors from the carbon canister to the engine
• Manufactured from high quality engineered materials, resistant to fuel vapors and extreme temperatures, ensuring long lasting performance
• Meets or exceeds all OEM specifications

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

• CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
• CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
• CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

GM Genuine Parts Fuel Pressure Relief Valve Caps are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

CARQUEST Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our CARQUEST Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. CARQUEST Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

• Meets or exceeds OE specifications for fit, form and function
• 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
• OE upgraded turbine impellers greatly reduce fuel pulsation
• All fuel pumps are 100% performance tested

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.