Buick Riviera Air Conditioning Parts

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Protective outer coverings help provide long-lasting durability
• Color-coded wires allow for easy installation
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Blue Streak Electronics is the leader in remanufactured electronics since 1987 and a name synonymous with OE performance. Blue Streak Electronics provides the highest quality, most comprehensive line of Engine, Transmission, Body, Powertrain control modules, Mass Air Flow Sensors, Diagnostic tools and Flash Programming solutions.

Product Features:

• BSE Remanufactured Climate Control Programmers are 100% tested to perform like new. OEM designs are analyzed, and design upgrades are implemented when necessary to provide improved durability over the OEM design.
• OEM Programmers are completely disassembled, cleaned, and inspected for wear & damage.
• Worn and non-functioning components are replaced with upgraded new components to improve reliability and performance.
• Common fail components are 100% replaced with new higher quality components.
• All Programmers are 100% tested to meet or exceed OEM performance specifications.

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

• Premium quality materials for longer service life
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

This HVAC clutch coil connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this HVAC clutch coil connector matches the appearance and function of the factory hardware on specified applications
• Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

High quality OE replacement part with all components needed to complete the job

Product Features:

• Matches the OE performance
• Long life and reliability
• Allows for different size wheels
• Vehicle specific applications

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

• Our Canister Purge valves meet or exceed original equipment specifications, providing confidence in every box
• Featuring industrial grade materials for robust performance
• Decades of industry leading research and development focused on meeting the technician’s needs
• With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
• BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:

• The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
• The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
• The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
• The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
• O-Rings and gaskets necessary for installation are included.

These nuts are manufactured using durable materials and corrosion tested to ensure required strength and longevity.

Product Features:

• Durable materials – manufactured to specific thread tolerance standards
• Corrosion tested – hardware undergoes salt spray testing to ensure corrosion resistance
• Multipurpose usefulness – can be used in a variety of applications, from auto to home
• Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

• High-quality products that meet OE appearance and performance to

Optimized refrigerant flow; Core design meets or exceeds OE performance And efficiency; Application specific design for GM vehicles; Replaces damaged evaporator inlet tube

High quality OE replacement part with all components needed to complete the job

Product Features:

• All mounting hardware included
• All pulleys and hubs are machined and trued to ensure an even surface
• Twelve point hub weld
• Coated to prevent corrosion

As a manufacturer in accumulator/filter driers, we offer quality units produced in a ISO/TS16949 And ISO14001 certified facility. State-of-the-art equipment And high quality materials ensure product integrity for long lasting performance customers rely on.; Our accumulator / filter driers feature quality welds for a durable, leak-free design in addition to high-quality desiccant for appropriate absorption. For easy installation, necessary gaskets, o-rings And seal are included as well.; The accumulator / filter drier acts as a filter by removing moisture And contaminants from the air conditioning system. Such contaminants cannot be removed by flushing, therefore replacing the accumulator / filter drier is essential.; Replacement of the accumulator / filter drier is required to validate compressor warranty And must be replaced anytime the system is serviced.; The absorption of moisture in the system is done through the use of a desiccant bag. A leaking or open system can cause the bag to become saturated within a few hours making the accumulator/filter drier ineffective.

High quality OE replacement part with all components needed to complete the job

Product Features:

• Quality connectors ensure proper conductivity
• Zinc coated to resist corrosion
• Plastic injected molded case
• One way fit connection

OE style connectors; Molded plastic construction; Quality contacts ensure proper conductivity; Universal applications

A/C Pressure Switch

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

• Premium bearing design matches OEM specifications
• Precision manufactured using premium-grade steel for outstanding durability and performance
• Available in both caged design and full complement
• Industry leading coverage
• Professional technicians know they can depend on National

High quality OE replacement part with all components needed to complete the job

Product Features:

• Contains gaskets, O-rings, or seals to properly replace the product
• Color coded for easy identification
• Zinc coated to resist corrosion
• Improved 2 terminal design replacing older 1 terminal switch

OE style connectors; Molded plastic construction; Quality contacts ensure proper conductivity; Universal applications

New Standard Replacement A/C System Seal Kit, MT2543, L4 Engine

Product Features:

• MT2543, L4 Engine
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

High quality OE replacement part with all components needed to complete the job

Product Features:

• Contains gaskets, O-rings, or seals to properly replace the product
• Color coded for easy identification
• Zinc coated to resist corrosion
• Vehicle specific applications

The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:

• This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
• The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
• Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
• Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
• All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
• We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
• Our condensers are manufactured from rigid design standards to fit OEM dimensions.
• Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
• Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges. The package passes the fre
• Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to ensure the highest quality standards from beginning to finished product.
• All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
• We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak. This industry leading process is the most precise method and can detect even the smallest leak. The leak-free condenser is then charged with nitrogen a
• Our condensers are manufactured from rigid design standards to match OEM dimensions. Each design undergoes a drop fit into the actual vehicle to ensure the final manufactured product provides an easy installation.
• Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
• vibration testing
• blast testing
• and salt spray testing to simulate real world conditions.

High quality OE replacement part with all components needed to complete the job

Product Features:

• Contains gaskets, O-rings, or seals to properly replace the product
• Color coded for easy identification
• Zinc coated to resist corrosion
• Vehicle specific applications

High quality OE replacement part with all components needed to complete the job

Product Features:

• All the seals needed to complete the job
• Compatible with both R12 and R134a refrigerants
• SUV and rear air applications
• Application specific