from

$69.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$274.99

Quick Strut Kit

from

$259.99

Quick Strut Kit

from

$194.99

Quick Strut Kit

from

$134.99

Quick Strut

from

$139.99

Quick Strut

from

$46.99

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$17.99

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing ¿ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ¿ in the part design process ensures speed-to-market and a precise fit guaranteed.
Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$17.99

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing ¿ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ¿ in the part design process ensures speed-to-market and a precise fit guaranteed.
Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$33.99

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$18.99

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing ¿ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ¿ in the part design process ensures speed-to-market and a precise fit guaranteed.
Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$55.99

Every new strut deserves a Monroe Strut-Mate Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:

PERFECT PAIRING – Ideal match for the ride control characteristics of Monroe struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
REDUCES NOISE AND VIBRATION – Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
REPLACES OE – Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
RIGOROUS TESTING – Fit checked and ride tested for quality you can count on
EASY TO INSTALL – Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily

from

$76.99

Every new strut deserves a Monroe Strut-Mate Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:

PERFECT PAIRING – Ideal match for the ride control characteristics of Monroe struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
REDUCES NOISE AND VIBRATION – Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
REPLACES OE – Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
RIGOROUS TESTING – Fit checked and ride tested for quality you can count on
EASY TO INSTALL – Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily

from

$27.99

Designed to protect the strut, the Monroe Strut-Mate Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.

Product Features:

REPLACES DAMAGED JOUNCE BUMPER OR BOOT – Avoid premature strut failure by replacing missing or damaged strut components
PROTECTS PISTON ROD – Protects piston rod finish from rust and corrosion and helps reduce oil leakage
KEEPS MOISTURE AND DIRT OUT – Self-draining design eliminates retention of moisture and other unwanted debris
ENHANCES STRUT LIFE – Delivers protection from severe suspension movement to improve strut durability
PERFECT PAIRING – Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
EASY TO INSTALL – Direct fit OE replacement with firm friction connection that helps keep the boot in place
BUILT TO LAST – Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts

from

$27.99

Designed to protect the strut, the Monroe Strut-Mate Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.

Product Features:

REPLACES DAMAGED JOUNCE BUMPER OR BOOT – Avoid premature strut failure by replacing missing or damaged strut components
PROTECTS PISTON ROD – Protects piston rod finish from rust and corrosion and helps reduce oil leakage
KEEPS MOISTURE AND DIRT OUT – Self-draining design eliminates retention of moisture and other unwanted debris
ENHANCES STRUT LIFE – Delivers protection from severe suspension movement to improve strut durability
PERFECT PAIRING – Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
EASY TO INSTALL – Direct fit OE replacement with firm friction connection that helps keep the boot in place
BUILT TO LAST – Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts