Buick Invicta Performance and Racing Products
Top Buick Invicta Performance and Racing Products Categories
We carry over 15 Performance and Racing Products in inventory for the Buick Invicta. If you’re looking for aftermarket Performance and Racing Products for your Buick Invicta, check out all these categories:
Essential Buick Invicta Performance and Racing Products
Accel – Distributor Cap And Rotor Kit (Part No.8124)
Accel – Custom Fit Spark Plug Wire Set (Part No.8843)
from
$112.99
These ACCEL wire sets are custom tailored for true street and strip performance use. Features oversize 8.8 mm ultra performance wires and spark plug boots, 550 degrees Fahrenheit double silicone construction with fiberglass braid. Spiral wound steel core conductor.
Product Features:
See More
Product Features:
- 8.8mm Graphite Suppression
- Silicone Spark Plug Boots
- 550 Degree Double Silicone Construction
- Fiberglass Braid
- Carbon/Graphite Core
- Magnetic Suppression
- Fiberglass/Kevlar Core
- 500 Ohms Resistance
Accel – Supercoil (Part No.140001)
from
$105.99
Engineered for faster rise time, longer spark duration and increased performance. Unique design with premium grade wire, special low resistance, high turns ratio windings. Produces higher spark energy with breakerless electronic ignition systems. For points application the supplied 0.85 ohm ballast resistor must be used in conjunction with the vehicle original ballast resistor, if so equipped. Oversized molded case with integral cooling fins and high capacity oil filled construction provide high thermal conductivity ensuring cool operation and long life. Extra tall tan Alkyd tower and integral voltage dam eliminate “flashover” to primary terminals. Comes complete with mounting hardware and 0.85 ohm ballast resistor. Effective up to 6,500 RPM.
Product Features:
See More
Product Features:
- Oil Filled For Better Cooling
- Optimized Low Resistance
- Silicon Magnetic Steel E-Core
- Higher Energy/Voltage Outputs
- Quicker Starts
- Improved Idle Quality
- Resists Shock And Vibration
- Resists Corrosion
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$186.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
FAG US – CUP (Part No.LM48510)
from
$7.69
CUP
Hays – Power Train (Part No.85-113)
from
$641.99
Power Train
Hays – Power Train (Part No.85-103)
from
$530.99
High burst strength woven lining to withstand heat and higher engine RPM. Heavy-duty sprung hub assembly to allow smooth engagement and steady torque transfer without chatter. Recommended for high horsepower street vehicles in addition to occasional drag strip use.
Product Features:
See More
Product Features:
- Built As Matched Assembly
- Exceptional Performance
- Exceptional Durability
- Long Term Dependability
Mr. Gasket – Intake Manifold Bolts (Part No.957G)
from
$25.99
These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes sixteen (16) 3/8 inch-16 x 1-1/4 inch bolts & washers
Product Features:
See More
Product Features:
- Zinc plated Grade 5 steel
- Flat washers provide uniform clamp load and prevent galling on aluminum intake manifolds
- Ideal For Minimal Space
- 12-Point Head And Flange
- Zinc Plated For Protection
Mallory – Mallory Kit: Unil Conv: Delco: V8 (Part No.501)
from
$134.99
Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.
Product Features:
See More
Product Features:
- Easy Installation
- Improved Fuel Economy
- Reduced Maintenance
- Accurate Timing
- Improved Performance
- Provides A Simple Conversion
- No Moving Parts To Wear Out
Mallory – Unilite Breakerless Ignition Conversion Kit (Part No.503M)
from
$176.99
Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.
Product Features:
See More
Product Features:
- Easy Installation
- Improved Fuel Economy
- Reduced Maintenance
- Accurate Timing
- Improved Performance
- Provides A Simple Conversion
- No Moving Parts To Wear Out
Mallory – Distributor Condenser (Part No.401)
from
$17.09
Distributor Condenser
Mr. Gasket – Thermocap Radiator Cap (Part No.2476BK)
from
$48.09
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.
Product Features:
See More
Product Features:
- Indicates coolant temperature
- Helps prevent coolant injuries
- Fahrenheit and centigrade readings
- Color-coded temperature ranges
- Integrated coolant reclamation valve
- Improves under-hood appearance
- Chromed crown with a colored trim ring
MSD Ignition – Distributor; Buick Nailhead; Ready-to-Run (Part No.8524)
from
$702.99
The Buick Nailhead is one of the most sought after nostalgic engines for rods and is still providing the smooth power to plenty of Buick’s. Nailhead fans can finally get a state-of-the-art distributor to provide the fire! MSD’s Nailhead distributor is a ready to run unit which incorporates a magnetic pickup that never wears out. Plus, the distributor has a built in ignition module so there is no need to mount an external MSD Ignition control. The module delivers up to 7.5 A to the coil creating a stout inductive spark. Not only do you get the benefits of electronic triggering, but your engine will awaken with powerful sparks from the ignition module. This improves combustion of the fuel mixture resulting in quick starts, a smooth idle and great performance.
Product Features:
See More
Product Features:
- Simple and clean three wire installation
- Includes built-in Rev Limiter
- Does not require an MSD Ignition Control
- Supplied w/HEI style distributor cap/rotor (accepts Cap-A-Dapts)
- Mech. advance assem. can be locked out for crank trigger systems
- Advance plate and weights are fine blanked from chrome moly steel
- QPQ coated for friction reduction
- QPQ coated polished steel shaft; guided by sealed ball bearings
- Maintenance-free magnetic pickup and precision reluctor
- Creates stable trigger signals throughout the rpm range
- CNC machined billet aluminum housing and billet aluminum base
- Vacuum advance canister for improved economy (can be locked out)
MSD Ignition – Distributor; Buick V8 Billet; 400-455 (Part No.8517)
from
$545.99
This distributor uses a high output magnetic trigger to fire an MSD Ignition control. Accurate trigger signals and spark delivery are the responsibility of the QPQ-coated steel shaft. A sealed ball bearing and long sintered bushing hold this shaft stable at any RPM. An adjustable mechanical advance mechanism is mounted on top of the shaft. Nylon pads ensure smooth movement of the fine balanced weights for accurate timing advancement. A variety of advance stop bushings and springs are supplied so you can dial in a custom curve.
Product Features:
See More
Product Features:
- CNC Machined Billet Alum. Housing and Billet Alum. Base
- Must Be Used w/An MSD Ignition Control
- Must Be Used w/An MSD 6/7/8/10 Series Ignition
- Mech. advance assem. can be locked out for crank trigger systems
- QPQ coated polished steel shaft; guided by sealed ball bearings
- Easy-to-adjust mech. advance w/supplied springs and stop bushings
- No CARB Exemption Order Number
Buick Invicta Performance and Racing Products Categories
Helping You Find the Right Performance and Racing Products for Your Buick Invicta
You love your Invicta. So we’ve made it easier than ever to help you find Buick Invicta Performance and Racing Products in our online catalog. Our inventory holds 15 aftermarket and OEM Performance and Racing Products for your Buick Invicta, ranging from $7.69 to $702.99.
We offer parts from 6 brands trusted to make quality Performance and Racing Products for your Buick Invicta. Before you buy, take some time to read through customer reviews. We currently have 90 reviews of Buick Invicta Performance and Racing Products from previous customers. Some of the top rated parts include Mallory Kit: Unil Conv: Delco: V8 with 5.0 stars.
Find your Invicta Performance and Racing Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Buick Invicta part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Performance and Racing Products Brands for Your Buick Invicta
Our inventory holds Performance and Racing Products for your Buick Invicta from 6 trusted brands. You’ll find OEM and aftermarket parts from brands like Mr. Gasket, Accel, and Mallory, all of which can keep that Buick happy.
We have Accel parts available for your Buick Invicta in categories like Performance Distributors. Some of the top-rated Accel parts in these categories are:
Top-Rated MSD Ignition Performance and Racing Products
Leading MSD Ignition Performance and Racing Products
We carry MSD Ignition brand parts for your Buick Invicta across several catalog categories, including Performance Ignition Products. Some of our most reviewed MSD Ignition parts include:
FAQs for Buick Invicta Performance and Racing Products
What are the most purchased Performance and Racing Products for the Buick Invicta?
Out of 15 Performance and Racing Products for the Buick Invicta, the most popular in our inventory are:
What are the top-rated Buick Invicta Performance and Racing Products?
Top-rated Performance and Racing Products for your Buick Invicta based on customer reviews/ratings are:
from
$134.99
(1)
Mallory Kit: Unil Conv: Delco: V8
“I had my 66 LeMans 326 engine rebuilt. After the install, which was easy to do, and following the instructions the engine fired right up. Now I won’t ”
