Buick Centurion Performance and Racing Products

Essential Buick Centurion Performance and Racing Products

Edelbrock – Performer RPM 2 Carb/Plate Nitrous Systems 4500 Series Carbs (200-400+ Hp) (Part No.70081)

Performer RPM 2 Carb/Plate Nitrous Systems 4500 Series Carbs (200-400+ Hp)

from

$830.99


Product Features:
  • Designed For Carbureted V8 Engines
  • Enhanced Flow Capacity
  • Softens The Hit Of The Nitrous System
  • Simple To Install
See More

Spectre – Sbc Blk Off Plate W/Bolts (Part No.42463)

Sbc Blk Off Plate W/Bolts

from

$12.99
Spectre’s triple chrome plated Fuel Pump Block Off Plate was designed for small block Chevrolet engines. Engineered for optimum fit and function, this kit includes a block off plate gasket and chrome mounting bolts with washers.

Product Features:
  • Necessary if switching to electric fuel pump
  • Includes block off plate gasket
  • Includes chrome mounting bolts with washers
  • Triple chrome plated
See More

B & M – Transpak For 68-81 TH 350 Transmission (Part No.30228)

Transpak For 68-81 TH 350 Transmission

from

$141.99
The B&M Transpak has all the features in the Shift Improver Kit, plus it provides additional driver manual control. Retain full automatic features and standard shift points with selector in Drive.

Product Features:
  • Recalibrate Auto. Transmission
  • Optimum Performance
  • Select Your App. Mode
  • Improves Transmission Life
  • Trans. Removal Not Required
See More

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 4 Piece Set (Part No.1357)

Lower Intake Manifold Gasket Set: 4 Piece Set

from

$43.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Edelbrock – Water Pump for Pontiac, Standard Rotation in Black Finish (Part No.88563)

Water Pump for Pontiac, Standard Rotation in Black Finish

from

$385.99
Edelbrock #88563 Water Pump Pontiac 389-455 standard rotation black ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using state-of-the-art racing technology, Edelbrock has designed these “super cooli

Product Features:
  • Standard Impeller Rotation
  • 0.625 in. Pilot Shaft
  • 0.750 in. Ball/Ball Bearing
  • 4.50 in. Block To Hub Height
  • Black Finish
See More

Energy Suspension – High Performance Sway Bar End Link Kit with Hardware (Part No.9.8117R)

High Performance Sway Bar End Link Kit with Hardware

from

$26.99
Made of high durometer, very firm, Hyper-Flex performance polyurethane. They’re economical, increase efficiency and are easy to install. Use Energy Suspension sway bar end links with sway bar bushings to get the maximum performance benefit. Combine both for the same effect as buying a larger sway bar. Together they offer a dramatic improvement in performance and handling.

Product Features:
  • Made from HYPER-Flex Polyurethane
  • Allows Vehicle to Work At Maximum Efficiency
  • Easy to Install
  • Superior Performance and Greater Longevity
  • Lasts Much Longer Than OEM Rubber End Links
See More

Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

High Performance 180 Degree Thermostat for Increased Flow

from

$26.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:
  • Opens At 180 Degrees
  • Designed to Resist Large Variations of Coolant Pressure at High RPM
  • Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
  • For High Performance Street, Drag Race, and Oval Track
  • Copper & Brass Construction – Resists Corrosion
  • High Flow
See More

Richmond Gear – Differential Ring And Pinion (Part No.49-0096-1)

Differential Ring And Pinion

from

$379.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:
  • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
  • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
  • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
  • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
  • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
See More

Hays – Power Train (Part No.85-110)

Power Train

from

$641.99
Matched assembly for maximum reliability. An excellent choice for high performance street applications.

Product Features:
  • Built As Matched Assembly
  • Exceptional Performance
  • Exceptional Durability
  • Long Term Dependability
  • Designed for Street And Street Strip Applications
See More

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

Promaster Classic Series; Ignition Coil

from

$186.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:
  • Glass Filled Polyester Case
  • Longer Spark Duration
  • Increased Performance
  • No Energy Loss Due To Arcing
  • Includes Brass Contact Terminal
See More

Edelbrock – Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1405)

Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet

from

$394.99
The Edelbrock 1405 Performer Series 600 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1405 Performer Series 600 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.

Product Features:
  • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
  • Manual Choke
  • 4 Barrel Count
  • Square Bore
  • Smooth Secondary Transition
  • Both Timed and Full Vacuum Ports
  • Includes PCV Outlet
See More

Energy Suspension – Coil Spring Isolator Set (Part No.3.6108G)

Coil Spring Isolator Set

from

$12.99
Made of superior Hyper-Flex material. Saves replacing again and again, lasting 3 to 10 times longer. Assemble to chassis the same way as OEM isolators and do not adversely change ride characteristics.

Product Features:
  • Made of Superior Hyper-Flex+ Material
  • Lasts from 3 to 10 Times Longer
  • Assemble to Chassis Same Way as OEM
  • Maintains Factory Ride Characteristics
  • Simple Way to Increase Vehicle Height
See More

MSD Ignition – Distributor; Buick V8 Billet; 400-455 (Part No.8517)

Distributor; Buick V8 Billet; 400-455

from

$545.99
This distributor uses a high output magnetic trigger to fire an MSD Ignition control. Accurate trigger signals and spark delivery are the responsibility of the QPQ-coated steel shaft. A sealed ball bearing and long sintered bushing hold this shaft stable at any RPM. An adjustable mechanical advance mechanism is mounted on top of the shaft. Nylon pads ensure smooth movement of the fine balanced weights for accurate timing advancement. A variety of advance stop bushings and springs are supplied so you can dial in a custom curve.

Product Features:
  • CNC Machined Billet Alum. Housing and Billet Alum. Base
  • Must Be Used w/An MSD Ignition Control
  • Must Be Used w/An MSD 6/7/8/10 Series Ignition
  • Mech. advance assem. can be locked out for crank trigger systems
  • QPQ coated polished steel shaft; guided by sealed ball bearings
  • Easy-to-adjust mech. advance w/supplied springs and stop bushings
  • No CARB Exemption Order Number
See More

Mallory – Unilite Breakerless Ignition Conversion Kit (Part No.503M)

Unilite Breakerless Ignition Conversion Kit

from

$176.99
Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.

Product Features:
  • Easy Installation
  • Improved Fuel Economy
  • Reduced Maintenance
  • Accurate Timing
  • Improved Performance
  • Provides A Simple Conversion
  • No Moving Parts To Wear Out
See More

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1479)

Exhaust Manifold Gasket Set

from

$34.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
  • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
  • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
  • Slotted bolt holes allow for easier header installation.
  • Not intended for use in emission controlled vehicles.
See More

Edelbrock – Valve Cover Gasket Set for Buick (Part No.7546)

Valve Cover Gasket Set for Buick

from

$35.99
The Edelbrock valve cover gaskets #7546?provide excellent sealing integrity and conformability for easy installation. The multi-layer construction has two highly compressible, high rubber content, fiber-reinforced outside layers which are chemically bonde

Product Features:
  • 0.1875 in. Thickness
  • Core-Reinforced-Composite Material
  • For Buick 400-455
  • Set of 2
  • Made In The USA
See More

Energy Suspension – Control Arm Bushing Set (Part No.3.3158R)

Control Arm Bushing Set

from

$149.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:
  • Maintains Better Alignment While Driving
  • Full Floating and Non Binding
  • Fits Into the Remaining Stock Control Arms
See More

Powertrax – Lock Right Locker (Part No.1921-LR)

Lock Right Locker

from

$368.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Energy Suspension – Control Arm Bushing Set (Part No.3.3103G)

    Control Arm Bushing Set

    from

    $110.99
    For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

    Product Features:
    • Maintains Better Alignment While Driving
    • Full Floating and Non Binding
    • Fits Into the Remaining Stock Control Arms
    See More

    Mr. Gasket – Water Neck (Part No.2557)

    Water Neck

    from

    $27.49
    Precision die cast, these water necks are first polished to a high luster, then chrome plated. Features an O-ring style seal to prevent water leaks. Comes with O-ring gasket and mounting bolts.

    Product Features:
    • Complete with o-rings and mounting bolts
    • Features an o-ring style seal to prevent water leaks
    • Chrome plated
    • 1/2″ NPT port can be used for various coolant temp related sensors or switches
    See More

    Mallory – Distributor Wiring Harness (Part No.29349)

    Distributor Wiring Harness

    from

    $30.49


    Product Features:
    • Service Part
    • Makes Connections Quick And Easy
    See More

    Mr. Gasket – Ultra Seal: Head Gasket (Part No.5788G)

    Ultra Seal: Head Gasket

    from

    $75.99
    Mr. Gasket Ultra-Seal Head Gaskets are a five layer (graphite core/perforated steel outer layers) composite construction. The graphite core has excellent thermoconductivity (transfers heat) away from hot spots in head preventing gasket burn-out. They provide excellent stability, compressibility and high temperature endurance. A high temperature silicone coating ensures sealing of engine fluids. Compatible with cast iron or aluminum heads, they will not brinell (indent) aluminum cylinder heads. Suitable for high performance street, drag race and oval track use. Sold individually.brbrGasket Bore 4.230 inch, Compressed thickness 0.038 inch

    Product Features:
    • Five layer (graphite core/perforated steel outer layers) composite construction
    • Graphite core has excellent thermo-conductivity-transfers heat away from hot spots in head preventing gasket burn-out
    • Provides excellent stability, compressibility and high temperature endurance
    • Coated with high temperature silicone to ensure sealing of engine fluids
    • Will not brinell (indent) aluminum cylinder heads
    • For high performance street, drag race and oval track use
    • Compatible w/High Octane Fuel
    • Compatible With Exotic Fuel
    See More

    Earls Performance Product – Brake Bleeder Screws (Part No.280029ERL)

    Brake Bleeder Screws

    from

    $40.99
    Brake Bleeder Screws

    Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)

    Tie Rod Dust Boot

    from

    $9.99
    Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

    Product Features:
    • Easy to Install
    • Superior Material
    • Saves Your Tie Rods
    • Lasts Longer
    • Looks Great
    See More

    Mr. Gasket – Alternator Bracket (Part No.9850)

    Alternator Bracket

    from

    $25.99
    Hold your alternator securely in place with Mr. Gasket chrome alternator bracket. Chrome plated heavy gauge steel for long lasting good looks. Must be used with #9852.

    Product Features:
    • Chrome Plated Steel
    • F-Style
    • Heavy Gauge Steel Construction
    • Fits Small Block Chevy 265-400 CID
    • Must Be Used With Part 9852
    See More

    Helping You Find the Right Performance and Racing Products for Your Buick Centurion

    You love your Centurion. So we’ve made it easier than ever to help you find Buick Centurion Performance and Racing Products in our online catalog. Our inventory holds 107 aftermarket and OEM Performance and Racing Products for your Buick Centurion, ranging from $7.69 to $1,138.99.

    We offer parts from 18 brands trusted to make quality Performance and Racing Products for your Buick Centurion. Before you buy, take some time to read through customer reviews. We currently have 1,035 reviews of Buick Centurion Performance and Racing Products from previous customers. Some of the top rated parts include Differential Ring And Pinion with 4.2 stars and Blaster 2 Coil: High Performance Ignition Upgrade with 4.3 stars.

    Find your Centurion Performance and Racing Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Buick Centurion part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

    Top Performance and Racing Products Brands for Your Buick Centurion

    Our inventory holds Performance and Racing Products for your Buick Centurion from 18 trusted brands. You’ll find OEM and aftermarket parts from brands like Mr. Gasket, Edelbrock, and Energy Suspension, all of which can keep that Buick happy.
    We have Accel parts available for your Buick Centurion in categories like Performance Distributors. Some of the top-rated Accel parts in these categories are:
    Distributor Cap And Rotor Kit
    from $48.49
    (1)
    Distributor Cap And Rotor Kit
    Performance Distributor Cap and Rotor Kits

    Top-Rated Edelbrock Performance and Racing Products

    Leading Edelbrock Performance and Racing Products

    We carry Edelbrock brand parts for your Buick Centurion across several catalog categories, including Performance Fuel Systems. Some of our most reviewed Edelbrock parts include:

    FAQs for Buick Centurion Performance and Racing Products

    What are the most purchased Performance and Racing Products for the Buick Centurion?

    Out of 107 Performance and Racing Products for the Buick Centurion, the most popular in our inventory are:
    High Performance 180 Degree Thermostat for Increased Flow
    from $26.99
    (20)
    High Performance 180 Degree Thermostat for Increased Flow
    Performance Engine Coolant Thermostats
    High Performance Sway Bar End Link Kit with Hardware
    from $26.99
    (7)
    High Performance Sway Bar End Link Kit with Hardware
    Performance Sway Bar Link Kits
    Fuel Pump Block-Off Plate
    from $12.99
    (6)
    Fuel Pump Block-Off Plate
    Performance Fuel Pumps

    What are the top-rated Buick Centurion Performance and Racing Products?

    Top-rated Performance and Racing Products for your Buick Centurion based on customer reviews/ratings are:
    Differential Ring And Pinion
    from $342.99
    (23)
    Differential Ring And Pinion
    “So far so good.”
    Blaster 2 Coil: High Performance Ignition Upgrade
    from $49.99
    (20)
    Blaster 2 Coil: High Performance Ignition Upgrade
    “Had one before and blew it up, good easy replacement. MSD makes a good product.”
    Performer 1411 Carburetor: 750 CFM, 4 Barrel, Square Bore, Electric Choke Inlet
    from $494.99
    (3)
    Performer 1411 Carburetor: 750 CFM, 4 Barrel, Square Bore, Electric Choke Inlet
    “i put this carb on my dump truck and i couldn’t be more pleased. my truck runs great and has better mpg and increased power”