BMW Z4 Fuel and Emissions Systems

Essential BMW Z4 Fuel and Emissions Systems

Delphi – Direct Injection High Pressure Fuel Pump: Without Gasket/Seal or Wiring Harness (Part No.HM10024)

Direct Injection High Pressure Fuel Pump: Without Gasket/Seal or Wiring Harness

from

$1749.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Capable of delivering fuel at high pressures that can range from 2,000-2,800 PSI
  • Mechanically driven high fuel flow pump enables rail pressure build up quickly for fast start times
  • Fuel delivered directly into the engine combustion chamber for increased horsepower and fuel economy
  • Meets OE specifications
See More

Delphi – Fuel Pump Module Assembly: With Float Arm (Part No.FG0852)

Fuel Pump Module Assembly: With Float Arm

from

$301.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
  • Lower amperage draws less load on vehicle’s electrical system
  • Part is validated, tested and matched to the right vehicle application
  • Always be sure to check and clean fuel tank to avoid unnecessary returns
  • Lower failure rates due to its innovative design and durability
See More

APA/URO Parts – Vapor Canister Gromm (Part No.B7085566156APA)

Vapor Canister Gromm

from

$7.07
Vapor Canister Gromm

Pierburg – Secondary Air Pump (Part No.B6010316164APG)

Secondary Air Pump

from

$331.48
Pierburg a global supplier to European automakers manufactures an OE-equivalent direct fit Air Pump that maintains the quality and performance of the Original Equipment it replaces. Pierburg designed a modular system of brackets, and vibration absorbing elements to ensure that the secondary air pump does not interact with its mounting location.

Product Features:
  • OE design
  • Low noise
  • Long working life
  • High thermal and mechanical resistance
  • Sealed bearing design
  • Housing sealed to protect against contamination
  • High output DC motor
  • Exact OE Body and engine mounting
See More

Carquest Premium – Multi Purpose Relay (Part No.RAA1834)

Multi Purpose Relay

from

$15.79
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Elring – Fuel Injector Seal (Part No.C1010681908ELR)

Fuel Injector Seal

from

$2.51
Fuel Injector Seal

DENSO – First Time Fit Oxygen Sensor (Part No.C5010378632ND)

First Time Fit Oxygen Sensor

from

$127.20
Denso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.

Product Features:
  • SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
  • DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
  • ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
  • STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.
See More

Dorman – Evaporative Emissions Canister Vent Valve (Part No.911-419)

Evaporative Emissions Canister Vent Valve

from

$69.99
A malfunctioning vapor canister vent solenoid can cause the engine light to come on. This vapor canister vent solenoid is engineered of quality materials for durability to ensure proper operation of the vehicle’s evaporative emissions system.

Product Features:
  • Direct replacement – this vapor canister vent solenoid fits and performs like original equipment with simple plug-and-play installation.
  • Quality construction – manufactured from premium materials for a long service life.
  • Excellent value – original equipment function at a lower price
  • Quality tested – has undergone simulation and endurance testing to ensure proper fit and performance
See More

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Fuel Tank Cleaning Kit

from

$12.49
When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:
  • Helps avoid premature fuel pump failure
  • Lint free towel included
  • Low suds formulation
  • Removes harmful contaminants from the fuel tank
See More

Carquest Premium – Evaporative Emissions System Leak Detection Pump (Part No.VDC1019)

Evaporative Emissions System Leak Detection Pump

from

$267.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Vapor Canister (Part No.CPJ2195)

Vapor Canister

from

$491.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Vapor Canister Purge Solenoid (Part No.CPC2436)

Vapor Canister Purge Solenoid

from

$82.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

APA/URO Parts – Intake Manifold Actu (Part No.B1205466803APA)

Intake Manifold Actu

from

$371.37
Intake Manifold Actu

APA/URO Parts – Intake Manifold Actu (Part No.B1205466802APA)

Intake Manifold Actu

from

$266.82
Intake Manifold Actu

Carquest Premium – Idle Air Control Valve (Part No.ABC3727)

Idle Air Control Valve

from

$225.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Vemo – Relay (Part No.P2020309952VMO)

Relay

from

$26.12
The Vemo Relay is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Elring – Fuel Injector Seal (Part No.C1010250098ELR)

Fuel Injector Seal

from

$6.73
Fuel Injector Seal

Elring – Throttle Body Gasket (Part No.C7001267853ELR)

Throttle Body Gasket

from

$21.11
Throttle Body Gasket

Bosch – Oxygen Sensor (Part No.C5010266616BOS)

Oxygen Sensor

from

$185.54
The Bosch oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • OE Style connectors and wire lengths.
  • Base ceramic probe of Zirconium and Yttrium.
  • Patented Platinum Power Grid.
See More

Carquest Premium – Remanufactured Fuel Injector (Part No.A212-1725)

Remanufactured Fuel Injector

from

$73.99
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:
  • Each unit is 100% tested to OE specifications
  • Includes new O-rings and seals made of premium OE quality materials
  • Includes application specific technical bulletin, where applicable
See More

Carquest Premium – Remanufactured Fuel Injector (Part No.A212-1735)

Remanufactured Fuel Injector

from

$59.99
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:
  • Each unit is 100% tested to OE specifications
  • Includes new O-rings and seals made of premium OE quality materials
  • Includes application specific technical bulletin, where applicable
See More

Carquest Premium – Fuel Injector Seal Kit (Part No.AS017)

Fuel Injector Seal Kit

from

$2.99
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:
  • Premium OE quality materials
  • Services one injector
See More

Carquest Premium – Fuel Injector Seal Kit (Part No.AS067)

Fuel Injector Seal Kit

from

$6.49
CARQUEST fuel injector seal kits include the necessary o-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:
  • Premium OE quality materials.
  • Services one injector.
See More

Pierburg – Secondary Air Injection Check Valve (Part No.B6050269306APG)

Secondary Air Injection Check Valve

from

$192.07
The Pierburg Air Pump Control Valve is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Helping You Find the Right Fuel and Emissions Systems for Your BMW Z4

You love your Z4. So we’ve made it easier than ever to help you find BMW Z4 Fuel and Emissions Systems in our online catalog. Our inventory holds 207 aftermarket and OEM Fuel and Emissions Systems for your BMW Z4, ranging from $2.51 to $1,749.99.

We offer parts from 29 brands trusted to make quality Fuel and Emissions Systems for your BMW Z4. Before you buy, take some time to read through customer reviews. We currently have 6,415 reviews of BMW Z4 Fuel and Emissions Systems from previous customers. Some of the top rated parts include First Time Fit Oxygen Sensor with 4.9 stars and Switching Oxygen Sensor: 4 Wire, 13.75" Long, Heated, Direct Fit with 5.0 stars.

Find your Z4 Fuel and Emissions Systems here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your BMW Z4 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Fuel and Emissions Systems Brands for Your BMW Z4

Our inventory holds Fuel and Emissions Systems for your BMW Z4 from 29 trusted brands. You’ll find OEM and aftermarket parts from brands like Bosch, Carquest Premium, and Delphi, all of which can keep that BMW happy.
We have Carquest parts available for your BMW Z4 in categories like Fuel Injectors. Some of the top-rated Carquest parts in these categories are:
Fuel Injector
from $145.05
(1)
Fuel Injector
Fuel Injectors

Top-Rated Bosch Fuel and Emissions Systems

Leading Bosch Fuel and Emissions Systems

We carry Bosch brand parts for your BMW Z4 across several catalog categories, including Oxygen Sensors. Some of our most reviewed Bosch parts include:

FAQs for BMW Z4 Fuel and Emissions Systems

What are the most purchased Fuel and Emissions Systems for the BMW Z4?

Out of 207 Fuel and Emissions Systems for the BMW Z4, the most popular in our inventory are:
Fuel Tank Cleaning Kit
from $12.49
This product is not rated
Fuel Tank Cleaning Kit
Fuel Tank Cleaning Kits
Fuel Injector Seal Kit
from $2.99
This product is not rated
Fuel Injector Seal Kit
Fuel Injector O-Ring Kits

What are the top-rated BMW Z4 Fuel and Emissions Systems?

Top-rated Fuel and Emissions Systems for your BMW Z4 based on customer reviews/ratings are:
First Time Fit Oxygen Sensor
from $127.20
(34)
First Time Fit Oxygen Sensor
“Quality fluid, works as it should.”
Switching Oxygen Sensor: 4 Wire, 13.75" Long, Heated, Direct Fit
from $92.99
(2)
Switching Oxygen Sensor: 4 Wire, 13.75" Long, Heated, Direct Fit
“Installed two in a 200 528i BMW in pre-cat application. Remove and Replace took 15 minutes for each sensor. Copper anti-seize paste was included in ”
Cap-Fuel
from $34.99
(2)
Cap-Fuel
“For 2002 bmw 325i this gas cap is excellent quality and comes with the strap to hang it on fuel door excellent loved it”