BMW X3 Wheels and Tires
Top BMW X3 Wheels and Tires Categories
We carry over 70 Wheels and Tires in inventory for the BMW X3. If you’re looking for aftermarket Wheels and Tires for your BMW X3, check out all these categories:
Essential BMW X3 Wheels and Tires
National – Multi-Purpose Seal (Part No.224510)
from
$7.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
McGard – Black Cone Seat Style Lug Bolt (M14 x 1.5 Thread Size) – Box of 50 Lug Bolts (Part No.69705BK)
from
$1024.99
McGard lug bolts are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. McGard is an Original Equipment supplier to most car lines around the world. McGard lug bolts enhance the look of any wheel! 2-piece design utilizes a free-spinning seat for optimum safety and performance. This design, in conjunction with a proprietary thread coating, protects against galling, helps prevent seized or difficult to remove lug bolts and enhances torque and tension. The triple-nickel chrome plating is guaranteed for life not to chip, peel or rust.
Product Features:
See More
Product Features:
- Guaranteed for life not to rust, chip, or peel.
- Every McGard lug bolt is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
- For use with steel or aluminum wheels with a tapered seat.
- Replaces Volvo M14x1.5 cone seat lug bolt part numbers 312-023-36 and 312-002-40.
Dill Air Control – Clamp-In TPMS Service Kit: Metal, 43Mm Ball-Seat Valve; W/ Shear Ring (Part No.1096)
from
$14.99
Ball-seat valve stem assembly with internal shear ring.
Product Features:
See More
Product Features:
- 43mm
- Rim Hole Compatibility: 0.453″
- 200 PSI maximum cold inflation pressure
National – Wheel Bearing (Part No.510081)
from
$99.99
Product Features:
See More
- BUILT TO LAST – Advanced heat treatment process for strength
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE – Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Driveworks – Wheel Bearing (Part No.S-510080)
REDI-Sensor – REDI-Sensor Metal Clamp-in Stem 433 Mhz — 1 Sensor (Part No.SE10008)
from
$55.99
REDI-Sensor sensors offer maximum application coverage, ease of use, and OE validation for fit, performance and reliability. REDI-Sensor replaces a host of OE sensors, including banded, snap-in and clamp-in type sensors. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Then, now and into the future we will be there for you, our customer.
Product Features:
See More
Product Features:
- Metal clamp-in stem.
- Works with most major TPMS Scan tools
- Reduces SKUs
- OE Designed and Validated
- Advance anodization of valve stems and hex nuts
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Schrader – EZ-sensor Programmable TPMS Sensor with Rubber Snap-in Valve, 24 Pack (Part No.33500-24BU)
from
$601.99
Schrader EZ-sensor Programmable TPMS sensor headlines the TPMS product offerings from Schrader TPMS Solutions. Schrader TPMS Solutions, a brand of Sensata Technologies, is the leading global manufacturer of tire pressure monitoring systems (TPMS). Schrader is a pioneer in TPMS and its direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms. Schrader offers a complete line of TPMS solutions, that help manage your shop’s needs from start to finish, offers ranging from their single-SKU, programmable EZ-sensor® family of products to pre-programmed OE replacement sensors, and programming and diagnostic tools, retrofit kits, and the industry’s first free online TPMS training www.TPMSAcademy.com. For more information about Schrader and its products visit: www.SchraderTPMS.com
Product Features:
See More
Product Features:
- EZ-sensor must be programmed to specific M/M/Y vehicle
- EZ-sensor Programmable TPMS sensor fits 99% of vehicles on the road
- EZ-sensor can be programmed by most all TPMS programming tools on the Market
- Supports 314.9, 315 and 433 MHz sensor applications
- Always keep your TPMS scan and programming tool up to date with the latest software
- Schrader TPMS sensors and valves are designed and manufactured to meet all OEM quality and functional specifications
- Rubber Valve can be replaced by rubber valve kit 20018 or aluminum valve kit 34000
- Valve Core Torque = 3.5 in-lbs (0.4 Nm)
Xtra Seal – Parts Kit For Imports (Part No.15-20211)
from
$1.99
Parts Kit For Imports
Huf North America – Black Finish-Includes Valve, Plastic Cap, Core, Grommet, Shear Collar Hex Nut (Part No.RDV026)
from
$13.29
BHsens (Huf) is an OE supplier that provides original replacement sensors in OE quality to the aftermarket for a multitude of vehicles. Huf has also developed the universal sensor IntelliSens UVS of equivalent quality, especially for repair shops, which cover nearly all vehicle models. While developing any products, Huf’s intention is to make it quick and easy for the installers to use. Huf Tire Pressure Sensors have the best coverage, fastest configuration process, and quickest and easiest assembly process in the market while maintaining the OE quality.
Product Features:
See More
Product Features:
- Complete Valve Kit for Huf OE and Aftermarket sensors
- Includes Valve, Plastic Cap, Core, Grommet and Hex Nut
- Flexible valve angle 0 to 36 degrees.
MOOG Hub Assemblies – Wheel Bearing and Hub Assembly (Part No.512597)
from
$279.99
Product Features:
See More
- Precision Matched Components: Rigorously controlled manufacturing processes ensure exact matching of bearing raceways and rolling elements to consistently deliver superior performance and minimize noise and vibration.
- Engineered to overcome problems and deliver smooth, reliable performance.
- MOOG hub assemblies are performance proven, quality tested and are available for a broad range of foreign and domestic vehicles.
- Application specific design
Carquest Premium – Hub Assembly with Wheel Bearing (Part No.91-481005)
from
$84.99
Carquest Premium hub assemblies have been rigorously quality tested to ensure they meet Original Equipment (O.E.) specifications and provide the same reliability and durability expected from OE parts. All Carquest Premium hub assemblies are coated with an obsidian e-coating that protects the hub from rust and corrosion. Our stringent manufacturing processes and high-quality components allow us to stand behind our Carquest Premium hub assemblies with an industry-leading warranty.
Product Features:
See More
Product Features:
- Engineered for OE fit, form and function
- Fully coated with an obsidian e-coating for enhanced rust and corrosion prevention
- High-quality steel and surface treatments for proper fit and endurance
- Roll-form bearing design applies exact preload for increased durability (where applicable)
- Bearings and seals are engineered to the requirements of each specific vehicle application
- Superior ABS sensors with matching signal and enhanced cord insulation for durability (where applicable)
Schrader – TPMS Sensor Service Kit (Part No.20018)
from
$3.79
Schrader service kits are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. Service kit components may include but are not limited to a valve core, sealing cap, grommet, nut, or valve stem. All pieces in a kit are intended for one-time use only and must be replaced with every tire change. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.
Product Features:
See More
Product Features:
- DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
- DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
- SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
- VEHICLE FIT: Each service Kit is tailored to a specific vehicle make, model, and year
- PROPER SERVICE: kits are intended for one-time use only and must be replaced with every tire change
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Huf North America – Aluminum TPMS Valve (Clamp-In) – 43mm (Part No.RDV027)
from
$13.29
BHsens (Huf) is an OE supplier that provides original replacement sensors in OE quality to the aftermarket for a multitude of vehicles. Huf has also developed the universal sensor IntelliSens UVS of equivalent quality, especially for repair shops, which cover nearly all vehicle models. While developing any products, Huf’s intention is to make it quick and easy for the installers to use. Huf Tire Pressure Sensors have the best coverage, fastest configuration process, and quickest and easiest assembly process in the market while maintaining the OE quality.
Product Features:
See More
Product Features:
- Complete Valve Kit for Huf OE and Aftermarket sensors
- Includes Valve, Plastic Cap, Core, Grommet and Hex Nut
- Flexible valve angle 0 to 36 degrees.
Autel – MX-Sensor Component Kit (Part No.MXSENSORCK)
from
$68.99
Component Kit includes a complete list of individual parts needed to service and replace existing rubber and metal valve stem Autel MX-Sensors. The smaller storage case keeps your replacement parts organized and easily within arms reach during your repair projects.
Product Features:
See More
Product Features:
- MX-Sensor Components
- 4 Metal Valves
- 4 Rubber Valves
- Rubber Gasket (2×10 pcs)
- Screw Nut (2×10 pcs)
- Washer (2×10 pcs)
- Metal Valve Cap (2X10 pcs)
- Rubber Valve Cap (2X10 pcs)
- Valve Core (2X10 pcs)
Autel – 1-Sensor Bulk Box (240-Pack, Rubber Valve) (Part No.300050)
from
$7322.99
The 300050 is a convenient bulk box of 240 individually bagged Autel MX-Sensor 1-Sensors. The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.
Product Features:
See More
Product Features:
- Bulk Box of (240) Individually Bagged 1-Sensors with Rubber Press-in Valve
- Bulk Box of 240 Individually Bagged 1-Sensors with Rubber Press-in Valve
- Combined Frequency 315MHz and 433MHz
- Programmable with Autel TPMS Service Tools
- Program to Replace 99% of OE Sensors
- Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
- Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
- Maximum Signal Strength / Battery Reliability
- Maximum Signal Strength, Battery Reliability
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Huf North America – Replacement Sensor 433MHz; flexible valve 0 to 36 degrees;3 yr warranty (Part No.RDE047V21)
from
$78.99
BHsens (Huf) is an OE supplier that provides original replacement sensors in OE quality to the aftermarket for a multitude of vehicles. Huf has also developed the universal sensor IntelliSens UVS of equivalent quality, especially for repair shops, which cover nearly all vehicle models. While developing any products, Huf’s intention is to make it quick and easy for the installers to use. Huf Tire Pressure Sensors have the best coverage, fastest configuration process, and quickest and easiest assembly process in the market while maintaining the OE quality.
Product Features:
See More
Product Features:
- OE Replacement Direct-Fit TPMS Sensor 433MHz with Metal valve (clamp-in)
- Match OE Sensors in function, design and quality.
- No programming required. Quick installation with only a relearn process needed.
- Just install sensor and relearn the vehicle.
- Have WAL technology for locating tire positon.
- Flexible valve angle 0 to 36 degrees.
- For specific models from Audi, Bentley, BMW, Ferrari, Lamborghini, McLaren, Mini, Porsche, Rolls Royce, VW
McGard – Black Cone Seat Lug Bolt Wheel Installation Kit for 5 Lug Vehicles (M14x1.5 Thread Size) (Part No.67205BK)
from
$374.99
The convenient way to order lug bolts and wheel locks. Contains all the fasteners that you need to install 4 wheels and tires. McGard wheel locks and lug bolts are manufactured in the EU and USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most car lines around the world. McGard lug bolts enhance the look of any wheel! 2-piece design utilizes a free-spinning seat for optimum safety and performance. This design, in conjunction with a proprietary thread coating, protects against galling, helps prevent seized or difficult to remove lug bolts and enhances torque and tension. The nickel chrome plating is guaranteed for life not to chip, peel or rust. These easy-to-use, one-piece wheel locks function like regular lug bolts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock and lug bolt is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- The bolt stem has a dacromet coating to meet O.E.M.standards.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
- Replaces Volvo M14x1.5 cone seat lug bolt part numbers 312-023-36 and 312-002-40. For use on Original Equipment cone seat aluminum wheels and Aftermarket cone seat aluminum wheels that use the Original Equipment fasteners. NOT for use with wheel spacers.
- Set of 16 Lug Bolts, 4 Wheel Locks, 1 Key & 1 Key Storage Pouch.
- Set of 16 Lug Bolts, 4 Wheel Locks, 1 Key & 1 Key Storage Pouch.
McGard – Black Cone Seat Lug Bolt Wheel Installation Kit for 5 Lug Vehicles (M14x1.25 Thread Size) (Part No.67226BK)
from
$374.99
The convenient way to order lug bolts and wheel locks. Contains all the fasteners that you need to install 4 wheels and tires. McGard wheel locks and lug bolts are manufactured in the EU and USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most car lines around the world. McGard lug bolts enhance the look of any wheel! 2-piece design utilizes a free-spinning seat for optimum safety and performance. This design, in conjunction with a proprietary thread coating, protects against galling, helps prevent seized or difficult to remove lug bolts and enhances torque and tension. The nickel chrome plating is guaranteed for life not to chip, peel or rust. These easy-to-use, one-piece wheel locks function like regular lug bolts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock and lug bolt is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- The bolt stem has a dacromet coating to meet O.E.M.standards.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
- For use with steel or aluminum wheels with a tapered seat.
- Set of 16 Lug Bolts, 4 Wheel Locks, 1 Key & 1 Key Storage Pouch.
- Set of 16 Lug Bolts, 4 Wheel Locks, 1 Key & 1 Key Storage Pouch.
Dorman – Wheel Bolt: M14-1.50 Thread Size, Conical – 60 deg Seat Style, Spline Drive Hex Size, Chrome, 1 Pack (Part No.712-601)
from
$16.49
Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.
Product Features:
See More
Product Features:
- Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
- Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
- Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
McGard – Chrome Bolt Style Cone Seat Wheel Lock Set (M14 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.27305)
from
$84.99
Protecting the world’s finest wheels and tires from theft since 1964. Wheel Lock Bolts are designed in the USA and manufactured in the EU and USA. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use wheel locks function like regular lug bolts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
- The bolt stem has a dacromet coating to meet O.E.M. standards.
- For use with steel or aluminum wheels with a tapered seat.
Schrader – TPMS Valve Stem Cap, Black, 100 Pack (Part No.20595-100)
from
$29.99
Schrader service caps are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. All Schrader service components are intended for one-time use only and must be replaced with every tire change. Each service component is tailored to a specific vehicle make, model, and year. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.
Product Features:
See More
Product Features:
- DIRECT REPLACEMENT: Service components are designed to replace original manufacturer parts
- DURABLE: Caps are constructed of high-quality materials to help ensure reliable performance and long service life
- SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
- VEHICLE FIT: Each service component is tailored to a specific vehicle make, model, and year
- PROPER SERVICE: Caps are intended for one-time use only and must be replaced with every tire change
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
KAI – Recon OEM Aluminum Alloy Wheel, 19 X 8.5, Front, Machined And Dark Silver (Part No.ALYBV068U35)
from
$435.99
As the Leading Value-Added Global Distributor of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles While Offering Our Customers the Most Comprehensive and Cost Effective Part Solutions, KAI is Supplying a Reconditioned OEM Aluminum Alloy Wheel, 19 X 8.5, 38MM Offset, 5 Double Spokes, 5 Lug, 120 MM Bolt Pattern, Front, Machined And Dark Silver. It is Designed to Replace Your Existing Factory Wheel. Check to Be Sure it Fits Your Vehicle. Warranty: 5 Year, Limited.
Product Features:
See More
Product Features:
- 19 X 8.5, 38MM Offset, 5 Double Spokes, 5 Lug, 120 MM Bolt Pattern, Front, Machined And Dark Silver, Made Of Aluminum
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Lug Nuts And Center Cap Not Included
- Check Out The Large Selection Of Parts Available For Your Vehicle
BMW X3 Wheels and Tires Categories
Helping You Find the Right Wheels and Tires for Your BMW X3
You love your X3. So we’ve made it easier than ever to help you find BMW X3 Wheels and Tires in our online catalog. Our inventory holds 70 aftermarket and OEM Wheels and Tires for your BMW X3, ranging from $1.99 to $7,322.99.
We offer parts from 16 brands trusted to make quality Wheels and Tires for your BMW X3. Before you buy, take some time to read through customer reviews. We currently have 2,509 reviews of BMW X3 Wheels and Tires from previous customers. Some of the top rated parts include Replacement Sensor 433MHz; flexible valve 0 to 36 degrees;3 yr warranty with 5.0 stars and Wheel Bearing with 5.0 stars.
Find your X3 Wheels and Tires here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your BMW X3 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Wheels and Tires Brands for Your BMW X3
Our inventory holds Wheels and Tires for your BMW X3 from 16 trusted brands. You’ll find OEM and aftermarket parts from brands like Autel, Schrader, and Dorman, all of which can keep that BMW happy.
We have Dill Air Control parts available for your BMW X3 in categories like TPMS Sensor Kits and TPMS Sensors. Some of the top-rated Dill Air Control parts in these categories are:
from
$3.49
(7)
TPMS Service Kit: Purple Color Coded Service Kit For Select Models, 25 Piece
Tire Pressure Sensor Service Kits
from
$14.99
(2)
Clamp-In TPMS Service Kit: Metal, 43Mm Ball-Seat Valve; W/ Shear Ring
Tire Pressure Sensor Valves
Top-Rated Schrader Wheels and Tires
Leading Schrader Wheels and Tires
We carry Schrader brand parts for your BMW X3 across several catalog categories, including TPMS Sensors. Some of our most reviewed Schrader parts include:
from
$43.99
(70)
Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece
Remote Tire Pressure Sensors
from
$56.99
(4)
Direct Fit Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece
Tire Pressure Sensors
FAQs for BMW X3 Wheels and Tires
What are the most purchased Wheels and Tires for the BMW X3?
Out of 70 Wheels and Tires for the BMW X3, the most popular in our inventory are:
from
$53.99
This product is not rated
Programmable Tire Pressure Sensor (TPMS): Adj. Angle Clamp-In Alum Valve, 1 Pc
Remote Tire Pressure Sensors
from
$11.49
This product is not rated
Box of 4 Metal Press-in Valve Stems for 1-Sensor
Tire Pressure Sensors
What are the top-rated BMW X3 Wheels and Tires?
Top-rated Wheels and Tires for your BMW X3 based on customer reviews/ratings are:
from
$92.99
(1)
Replacement Sensor 433MHz; flexible valve 0 to 36 degrees;3 yr warranty
“Interacts with BMW air pressure system great.”
from
$11.49
(1)
Rubber Valve Kit for Interchangeable MX-Sensors. Kit Includes 4 Rubber Valves.
“Says on site these are Universal and will be compatible with 2015 Patriot. They are not. Will not fit in existing jeep sensors. Waste of time with veh”
