BMW M6 Ignition and Tune-Up Products

Essential BMW M6 Ignition and Tune-Up Products

Carquest Premium – Ignition Switch (Part No.CSC4104)

Ignition Switch

from

$104.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Ignition Switch (Part No.CSA1985)

Ignition Switch

from

$101.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

VDO – Knock Sensor (Part No.F6020408660VDO)

Knock Sensor

from

$62.55
The VDO OE quality knock sensor is engineered to the exact specifications of the vehicle manufacturer to ensure the replacement sensor is the same in quality and function as the part installed as first equipment.

Product Features:
  • OEM quality direct fit application
  • Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
  • Mounting hole is the same size as OE
  • Maintains OE specifications for frequency response
See More

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.EKA1075)

Ignition Knock (Detonation) Sensor

from

$169.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

APA/URO Parts – Spark Plug Tube (Part No.F1012521259APA)

Spark Plug Tube

from

$22.24
Spark Plug Tube

Delphi – Ignition Coil (Part No.GN10563)

Ignition Coil

from

$116.99
Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.

Product Features:
  • Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
  • Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
  • Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
  • We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
See More

NGK – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.48705)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$58.99
NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience

Product Features:
  • OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
  • OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
  • EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
  • THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
  • EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
  • PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils
See More

NGK – OE Series Laser Iridium High Ignitability Spark Plug: SPE Tip Design, SILZKBR8D8S (Part No.97506)

OE Series Laser Iridium High Ignitability Spark Plug: SPE Tip Design, SILZKBR8D8S

from

$28.99
NGK Laser Iridium High Ignitability spark plugs offer the best combination of performance and longevity. Engineered specifically for OE applications, Laser Iridium High Ignitability spark plugs are tested to the highest standards to ensure quality and dur

Product Features:
  • ACTUAL OE or EQUIVALENT HIGH IGNITABILITY DESIGN: SPE tip & iridium alloy center electrode produce the most advanced OE spark plug technology
  • IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
  • SPE DESIGN: Square platinum electrode shape of the ground electrode provides the best ignitability and service life for high heat engines
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
  • RECOMMENDED USAGE: Best for vehicles with OE SPE iridium alloy plugs
See More

Champion – Champion Copper Plus Small Engine- Single Card – RA6HC (Part No.809C)

Champion Copper Plus Small Engine- Single Card - RA6HC

from

$2.99
Dependable performance. This Champion spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.

Product Features:
  • Resists fouling
  • Superior corrosion resistance
  • Dependable and proven performance
  • Increased conductivity and heat control for good overall wear
See More

Champion – Champion Copper Plus- Boxed – RER8MC (Part No.445)

Champion Copper Plus- Boxed - RER8MC

from

$4.49
Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.

Product Features:
  • Copper Plus – Dependable Performance and Durability
  • Copper core center electrode allows for accurate control of heat range for longer life
  • Superior corrosion resistance
  • Built to ISO and SAE standards for proven performance
  • Built to ISO and SAE standards for proven performance
See More

Bremi – Distributor Rotor (Part No.F20202973976BRM)

Distributor Rotor

from

$53.60
Distributor Rotor

Bosch – Bosch Distributor Rotor (Part No.F202024522BOS)

Bosch Distributor Rotor

from

$65.19
Bosch Distributor Caps and Rotors are made from top quality materials throughout to ensure high performance and long product life.

Product Features:
  • Superior Surface Finish
  • RFI Resistors (Asian) / RFI Suppression (European)
  • Installation Screws
  • Precision-machined Contacts
  • Finely -tooled Metal Mounting Sleeve (Asian)
See More

Beck/Arnley – Ignition Rotor (Part No.173-7908)

Ignition Rotor

from

$37.49
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Radio Frequency Interference (RFI) coating where applicable to minimize radio interference
  • Premium material used to maximize rotor durability and helps restore ignition to original condition
  • Constructed to withstand an engine environment
  • Application specific for this vehicle
See More

Carquest Premium – Coil On Plug Insulator Boot: Spring included, Designed for direct fit (Part No.35-7030)

Coil On Plug Insulator Boot: Spring included, Designed for direct fit

from

$4.99
CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.

Product Features:
  • Provides excellent heat resistance as well as maximum protection against spark loss.
  • Durable silicone compound for resistance to high heat or abrasion
  • Spring included with the coil boot
  • Design for direct compatibility
  • OE design provides an exact fit for your application
  • Multipack provides one time replace all COP for better deal
See More

Beru – Ignition Wire End Plug (Part No.F1050459136BER)

Ignition Wire End Plug

from

$15.78
The task of the wire end plug is to provide a reliable connection and transfer the electrical power – under extreme operating conditions. BERU connectors are designed in accordance with OEM requirements and equipped with original connecting pieces – irrespective of whether as a spark plug connector, ignition coil connector or distributor connector.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Carquest Premium – Distributor Cap and Rotor Kit (Part No.CAE1835)

Distributor Cap and Rotor Kit

from

$121.99
Distributor Cap and Rotor Kit

Bosch – Bosch Distributor Cap (Part No.F201024486BOS)

Bosch Distributor Cap

from

$139.90
Bosch Distributor Caps and Rotors are made from top quality materials throughout to ensure high performance and long product life.

Product Features:
  • Superior Surface Finish
  • RFI Resistors (Asian) / RFI Suppression (European)
  • Installation Screws
  • Precision-machined Contacts
  • Finely -tooled Metal Mounting Sleeve (Asian)
See More

Bremi – Distributor Cap (Part No.F2010459137BRM)

Distributor Cap

from

$148.48
Bremi Distributor Caps and Rotors are made from top quality materials throughout to ensure high performance and long product life. BREMI is an original equipment manufacturer and aftermarket supplier for Ignition products.

Product Features:
  • Superior Surface Finish
  • RFI Suppression
  • Installation Screws
  • Precision-machined Contacts
See More

Carquest Premium – Distributor Cap (Part No.CAE1689)

Distributor Cap

from

$79.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Helping You Find the Right Ignition and Tune-Up Products for Your BMW M6

You love your M6. So we’ve made it easier than ever to help you find BMW M6 Ignition and Tune-Up Products in our online catalog. Our inventory holds 54 aftermarket and OEM Ignition and Tune-Up Products for your BMW M6, ranging from $2.99 to $512.99.

We offer parts from 14 brands trusted to make quality Ignition and Tune-Up Products for your BMW M6. Before you buy, take some time to read through customer reviews. We currently have 420 reviews of BMW M6 Ignition and Tune-Up Products from previous customers. Some of the top rated parts include OE Series Standard Nickel Spark Plug: Conventional Tip Design, DR7EA with 4.7 stars and Copper Plus Small Engine Spark Plug Dependable Performance, OE Replacement RA6HC with 2.8 stars.

Find your M6 Ignition and Tune-Up Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your BMW M6 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Ignition and Tune-Up Products Brands for Your BMW M6

Our inventory holds Ignition and Tune-Up Products for your BMW M6 from 14 trusted brands. You’ll find OEM and aftermarket parts from brands like Autolite, NGK, and Bosch, all of which can keep that BMW happy.
We have Delphi parts available for your BMW M6 in categories like Ignition Coils and Boots. Some of the top-rated Delphi parts in these categories are:
Ignition Coil
from $70.99
(3)
Ignition Coil
Ignition Coils
IGNITION COIL
from $49.99
(7)
IGNITION COIL
Ignition Coils

FAQs for BMW M6 Ignition and Tune-Up Products

What are the most purchased Ignition and Tune-Up Products for the BMW M6?

Out of 54 Ignition and Tune-Up Products for the BMW M6, the most popular in our inventory are:

What are the top-rated BMW M6 Ignition and Tune-Up Products?

Top-rated Ignition and Tune-Up Products for your BMW M6 based on customer reviews/ratings are:
Champion Copper Plus- Boxed - RER8MC
from $4.49
(1)
Champion Copper Plus- Boxed – RER8MC
“Have to go to dealer to get them or parts store have to order direct from Champion.”